H160
© 2008 AS America Inc.
NOTES:
RIGHT HAND OUTLET SHOWN, RIGHT HAND REVERSE DIMENSIONS
(2697.102).
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
■ REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH BATH.
IMPORTANT: Dimensions of xtures are nominal and may vary within the range
of tolerances established by ANSI Standard A112.19.1. These measurements
are subject to change or cancellation. No responsibility is assumed for use of
superseded or voided leaet.
To Be Specied:
❏ Color:
❏ Bath Faucet*:
❏ Faucet Finish:
❏ Drain: 1583.470
* See faucet section for additional models available
BELMOR™
5' TUB
ENAMELED CAST IRON
BELMOR™ 5' CAST IRON TUB
❏ 2697.102 Right hand outlet
❏ 2697.202 Left hand outlet
Product Features:
• Enameled cast iron construction
• One-piece bath
• Integral apron
• Comfortable lumbar support
• End drain outlet
• Full slip-resistant pattern
Nominal Dimensions:
60" x 30" x 14"
(1524 x 762 x 356mm)
Compliance Certications -
Meets or Exceeds the Following Specications:
• ASME A112.19.1 for Cast Iron Plumbing Fixtures
• ASTM F-462 for Slip-resistant Bathing Facilities
• CAN / CSA B45 Series
SUPPORT
FEET
ROUGH
FLOOR
FINISHED
WALL
229 x 305mm
9" X 12" HOLE IN SUB FLOOR
FOR BELOW FLOOR ROUGH
762mm
30"
1524mm
60"
381mm
15"
FINISHED
WALL
FINISHED
WALL
FINISHED
WALL
206mm
8-1/2"
356mm
14"
64mm
2-1/2"
DIA.
6mm
1/4"
13mm
1/2"
76mm
3"
STD. 1-1/2
DRAIN OUTLET
38mm
1-1/2"
GENERAL SPECIFICATIONS FOR 2697 BATHING POOL
60 x 30 x 14 In. (1524 x 762 x 356mm)
430 Lbs. (195 Kg.)
715 Lbs. (320 Kg.)
34 Gal. (128 L)
42 x 18 In. (1066 x 457mm)
24 x 55 In. (610 x 1397mm)
10 In. (254mm)
60 Lbs./Sq.Ft. (293 Kgs./Sq.m)
12.5
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA FT
2
)
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES
AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND
USEABLE BUILDING FACILITIES-CHECK LOCAL CODES.
INSTALL WITH SEAT AT HEAD END.
Revised 2/08