Vizualogic H2 Owner's manual

Brand: Vizualogic

Model: H2

Type: Owner's manual

VL8000 Series

Hummer H2

VISOR MONITOR SYSTEM

99-8013-002 10/03

Owner ’s Manual

1493 Bentley Drive • Corona, CA 92879 • 909-272-1996 • 800-624-7960 • Fax 909-272-1584

www.vizualogic.com

Corona, CA U.S.A.

060300

Specifications

ELECTRICAL SPECIFICATIONS – 7.0”

Display Type: LCD

Screen size: 7.0” (Diagonal)

Resolution: 1,440 (W) x 234 (H)

Number of Pixels: 336,960

Brightness: 400 nit

Horizontal view angle: ±65°

Vertical view angle: +40°, -65°

Power requirement: (Monitor) DC 12.0V ±1.5

Power consumption: (Monitor) DC <1A

Note: Designs and specifications are subject to change without notice and

without legal obligation.

Fall 2003

Welcome

Congratulations on your purchase of a Vizualogic

VL8000 System that will pro-

vide your family with many years of enjoyment. This sophisticated product

provides video entertainment to passengers without altering the appearance of

your vehicle’s original interior.

Reviewing this owner’s manual thoroughly prior to operation will provide you with

the best performance and help explain the simple requirements for proper care.

Important Safety Information:

This video product is designed and intended for use when the vehicle is not

in motion and, where it cannot be viewed directly or indirectly by the driver and

possibly cause him/her to be distracted from the task of operating the vehicle.

Driver distraction is a major cause of accidents and for this reason many states

specifically prohibit the viewing of motion video within view of the driver while the

vehicle is in motion.

Purchase Information

Please fill out this section for your reference and retain the original bill of sale to

validate your Limited Warranty should service become necessary:

Date of Purchase:

Place of Purchase:

Unit Serial Number:

2 11

Table of Contents

Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Purchase Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Controls (Remote Control) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Controls (A/V Controller) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Optional Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9, 10

Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover

Features

• Flush Mounted LCD Monitor: Provides crisp, clear images on an easy to view

color screen.

• Wide Viewing angle: A minimum of ±45° (90

) horizontal viewing angle

ensures that off-axis viewers will be able to enjoy viewing with full color clarity.

• 2 Input Source Selector: Permits a choice of two inputs to allow viewing of

multiple sources, (i.e., DVD Player on input 1, and VCR on input 2).

• On-screen adjustments for:

- Sharpness

- Contrast

- Brightness

- Color

- Tint

- Mirror Mode

• Factory Replacement Visor: Your VizuaLogic

visor monitor has been

designed to match the original shape and materials of your factory visor.

10 3

How to Obtain Warranty Service

To obtain warranty service, the product(s) must be returned to a Company

authorized installer accompanied by proof of warranty coverage.

How State Law Relates to the Warranty

Some states do not allow limitation on how long an implied warranty lasts. In

such states, the limitations or exclusions of this Limited Warranty may not apply.

Some states do not allow the exclusion or limitation of incidental or consequential

damages. In such states, the exclusion or limitation of this Limited Warranty may

not apply to you. This Limited Warranty gives you specific legal rights and you may

have other rights which vary from state to state.

What is Excluded from this Limited Warranty

This limited warranty excludes:

• Elimination of externally generated static or noise, or the correction of antenna

problems or weak television reception.

• Costs incurred for installation, removal or reinstallation of the product(s).

• Damage to tapes, video games, software, camcorders, discs, speakers,

accessories or vehicle electrical systems.

• Cosmetic damage or damage due to negligence, misuse, abuse, failure to

follow operating instructions, accidental spills or customer applied cleaners.

• Damage due to environmental causes such as floods, airborne fallout,

chemicals, salt, hail, windstorms, lightning or extreme temperatures.

• Damage due to accidents, road hazards, fire, theft or vandalism.

• Damage due to improper installation or connection, including connection to

equipment of another manufacturer, modification of existing equipment, use

of a faulty cassette tape or VCP head cleaning.

• Product(s) which have been opened or tampered with for any reason or which

have been damaged due to alteration or service performed by anyone other

than the Company or a Company authorized installer.

4 9

Controls

Remote Control:

Please refer to the photo.

This section will describe the video system control functions

of the remote control. Please see your DVD Player Owner’s

Manual for a description of the DVD controls.

Note: Install (2) AAA batteries (included) into the

remote control.

Monitor Power: Press the ‘Power’ button to illuminate the

LCD screen.

Screen Adjustments: Press the MENU button to select the

desired screen adjustment, then press the up arrow or

down arrow to change the setting. Each press of the

MENU button will cycle to the next adjustment.

Sharpness: Adjusts display sharpness.

Contrast: Adjusts the differentiation between light and

dark.

Brightness: Adjusts the overall brightness of the

LCD display.

Color: Adjusts the intensity of the display colors.

Tint: Adjusts the overall red/green color balance.

Dimmer: Adjusts the backlight level of the LCD illumination.

Mirror Mode: Reverses the screen image for use with a rearview camera.

Select ‘off’ for video and ‘on’ for a mirror image.

Zoom: Changes the aspect ratio of the display. ‘Full’ is 16:9, Normal is 4:3,

‘Cinema’ is a zoom-in view of 16:9, ‘Wide’ is a zoom-out view of 16:9.

Input Select: Press the ‘SEL’ button to select Input 1, ‘AV1’ or Input 2, ‘AV2’.

Limited Warranty

Terms of Warranty

TMI Products, Inc (Company) warrants to the original retail purchaser that the

automotive video product(s) purchased from a Company authorized installer,

within the first ninety (90) days after new vehicle delivery, are free from defects in

materials or workmanship under normal use and conditions for a period of three

(3) years from date of purchase or the first 36,000 miles as registered on the

vehicle’s odometer at time of installation, whichever occurs first, with exception of

remote control(s) which is warranted for a period of sixty (60) days from date of

purchase. Products purchased or installed more than ninety (90) after new

vehicle delivery are warranted for a period of one (1) year from date of purchase.

A sales receipt is required to provide proof of date of purchase.

Should the product(s) be determined defective during the applicable warranty

period, the defect(s) will be repaired or replaced with a new or reconditioned

part(s), at the Company’s option.

EXCEPT AS EXPRESSLY SET FORTH IN THIS WARRANTY, THE COMPANY MAKES

NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE. THE COMPANY EXPRESSLY DISCLAIMS ALL WARRANTIES NOT

STATED IN THIS LIMITED WARRANTY. ANY IMPLIED WARRANTIES THAT MAY

BE IMPOSED BY LAW ARE LIMITED TO THE TERMS OF THIS EXPRESSED

LIMITED WARRANTY.

8 5

Controls (continued)

A/V Controller:

- The Video Controller in your VL8000 kit is a 2 input/2 output controller.

- Insert IR wiring from input (DVD,VCR) into appropriate connection on

A/V controller.

- Connect a DVD player or VCR to Input 1, connect a second player to

Input 2.

- The Slave 1 and Slave 2 RCA connectors (Audio R, Audio L, and Video) are

linked to the output connector for the headrest and can be used to supply

signals to audio devices such as FM Modulators and Headphone transmit-

ters as well as other screens.

Optional Accessories

To increase the enjoyment and utility of your VizuaLogic

System, several acces-

sories are available from your local authorized distributor/retailer:

DVD PLAYER

• DVD/SVCD/CD/MP3 compatible

• PAL/NTSC color system

• Dolby Pro Logic surround

sound/DTS ready.

• Wireless remote control with full

functions.

• 7” (w) x 2” (h) x 7” (d)

(90-5003)

WIRELESS STEREO HEADPHONES

• Multi-channel

• RF crystal-tuned

• 49 MHz

(90-3004)

THE GLOVE

— AUTOMOTIVE DVD

AND VCP PROTECTIVE COVERS

• Mounts and Protects.

• Speeds Installation.

(89-2106-xx)

Care and Maintenance

Your VizuaLogic

System is a product of superior design and craftsmanship and

should be treated with care. The suggestions below will help to fulfill any

warranty obligations and provide many years of enjoyment.

• Cleaning the Monitor Screen and Housing: The components may be cleaned

by occasional gentle wiping with a soft, lint-free, cotton cloth that has been

slightly dampened with water.

CAUTION: Do not use liquids, abrasives, aerosol cleaners, or paper

cleaning products because they will result in permanent damage to the

finish of your components! The LCD screen is made of a specially coated

glass and can be scratched or damaged by abrasive or ammonia-based

window cleaners.

• Use and Storage:

- These units contain precision electronics that must be protected from dust,

dirt, and moisture.

- Never spill liquids on any of the components. Liquids, humidity, and

precipitation contain minerals that will corrode electronic circuits.

• Take care to avoid the following:

- Rough handling can break internal circuit boards. Do not drop, knock, or

shake the components.

- Do not attempt to paint or refinish the components. Paint can clog moving

parts and prevent proper operation.

- The components can be damaged by non-expert handling. Attempting to

open any of the components may void the limited warranty.

6 7

Troubleshooting

• No Display: (Screen is blank)

- Verify that the parking brake is engaged.

- Point remote control at screen and press “POWER” button.

- Verify 12V power is correctly supplied to Video Controller.

- Verify that monitor cable is connected to Video Controller.

- Verify that 12V circuit is on (i.e., ignition position).

• No Video: (Blue screen)

- Make sure all cables are connected correctly.

- Make sure Source (DVD player, etc…) is “ON.”

- Make sure Source (DVD player, etc…) is in “PLAY” mode.

- Press TV/AV button to ensure correct Input is selected.

Vizualogic H2 Owner's manual

Brand: Vizualogic

Model: H2

Type: Owner's manual

Download PDF

report

Vizualogic H2 Owner's manual

Vizualogic H2 Owner's manual

Related papers

Other documents