ESAB CUTMASTER 40 PLASMA CUTTING SYSTEM Declaration of conformity

EU DECLARATION OF CONFORMITY

According to

The Low Voltage Directive 2014/35/EU, entering into force 20 April 2016

The EMC Directive 2014/30/EU, entering into force 20 April 2016

The RoHS Directive 2011/65/EU, entering into force 2 January 2013

Type of equipment

PLASMA CUTTING SYSTEM

Type designation etc.

CutMaster 40, from serial number 007-XXXXXX

Brand name or trade mark

Thermal Dynamics, an ESAB brand

Manufacturer or his authorised representave

Name, address, telephone No:

OZAS-ESAB Ltd.

ul. A. Struga 10,

45-073 Opole, Poland

Phone: +48 77 4019270, FAX + 48 77 4019 201.

The following harmonised standard in force within the EEA has been used in the design:

IEC/EN 60974-1:2017 / AMD1:2019 Arc Welding Equipment - Part 1: Welding power sources.

IEC/EN 60974-10:2014 + AMD 1:2015 Published 2015-06-19 Arc Welding Equipment - Part 10: Electro-

magnetic compatibility (EMC) requirements

Additional Information: Restrictive use, Class A equipment, intended for use in location other than

residential.

By signing this document, the undersigned declares as manufacturer, or the manufactur-

er’s authorised representative, that the equipment in question complies with the safety

requirements stated above.

Date Signature Position

10 February, 2020

Flavio Santos General Manager

Accessories and

Adjacencies

2020