Kogan KACAMWBUSBA User manual

Brand: Kogan

Model: KACAMWBUSBA

Type: User manual

Kogan Webcam for Smart TV - KACAMWBUSBA

User’s Notice

No part of this manual, including the products and software described in it, may be reproduced,

transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or

by any means, except documentation kept by the purchaser for backup purposes, without the

express written permission of us.

Product warranty or service will not be extended if: (1) the product is repaired, modified or altered,

unless such repair, modification of alteration is authorized in writing by us; or (2) the serial

number of the product is defaced or missing.

Products and corporate names appearing in this manual may or may not be registered trademarks

or copyrights of their respective companies, and are used only for identification or explanation and

to the owners’ benefit, without intent infringe.



Windows, MS-DOS, and DirectX are registered trademarks of Microsoft Corporation.



Adobe and Acrobat are registered trademarks of Adobe Systems Incorporated.

The product name and revision number are both printed on the product itself. Manual revisions are

released for each product design represented by the digit before and after the period of the manual

revision number. Manual updates are represented by the third digit in the manual revision number.

SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE

FURNISHED FOR INFORMATION USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY

TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY

US. WE ASSUME NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR

INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCT

AND SOFTWARE DESCRIBED IN IT.

Kogan Webcam for Smart TV - KACAMWBUSBA

Contents

Chapter 1: Introduction................................................................................................3

1.1 Package Contents............................................................................................3

1.2 System Requirements......................................................................................3

Chapter 2:Install the USB PC Camera utility software................................................4

Chapter 3: Launch the Software...................................................................................6

3.1 Running the Camlife.......................................................................................6

3.2 Watch Video....................................................................................................6

Chapter 1: Introduction

1.1 Package Contents

Upon receiving your USB PC camera, please make sure the following items are included in the 

the USB PC camera package.



The USB Camera

1.2 System Requirements



IBM PC or compatible



Intel Pentium II 700 MHz CPU or better processor



Minimum 256 MB memory



One free USB slot



Microsoft Windows XP/Vista



CD-ROM drive



MODEM or ETHERNET card inquired when using Net meeting.

Chapter 2: Install the USB PC Camera utility

software

1. Plug the camera into a spare USB port on your

computer. The software should be detected and

load automatically.

Click “Next” button to start installing.

2. In this part, please read the agreement and

print a copy if required. Hit next where you

will see the installation guide, reminding you

to select the path where the software will be

installed. Click “Browse” to change the path,

and then click “Next” to the next step. If you

do not wish to change the installation path,

click “Next”.

3. Please click “Install” button to start installing

the software.

4. Windows will then install the driver files.

5. Click “Finish” to complete install.

Chapter 3: Launch the Software

3.1 Running Camlife

Click Start on Windows Taskbar, and

then select Programs\Camlife\Camlife.

3.2 Watch Video

Video preview

After the program starts up, the video

stream from the video capture device

will be displayed in the video

window. You may drag and resize the

video window at your discretion.

Snapshot:

Press to capture a still image/photograph and save it as BMP or JPG file, named

by the current time. The save directory can be configured in the settings window.

Autosnapshot:

Press to capture continuous shots over a minute.

Record:

Press to capture a video stream and save it as an MPG file named by the time, to

the directory you assigned. Press again to stop recording.

Image Browse:

Press to browse the images captured. For details, please go to the Browse images

section.

Settings:

Press to configure the following settings:

A. Snapshot settings: support BMP

and JPEG image formats. Please

choose your desired format.

B. Recording settings: Customize the

recorded video files' quality settings.

The file format is MPEG.

C. Device settings: Here, you can

change the video or audio capture

device if possible.

D. CamLife "file settings" can set the save path

for recording and snapping.

Choose "digital zoom" mode to zoom in or zoom

out picture size.

Choose" resolution" mode to select the image

resolution. It can up to 10 million pixels.

Choose "Remote Control" mode to start remoter

control function (if you have a compatible remote

control).

Choose "Picture frame rate" mode to display real

time picture frame rate.

Kogan KACAMWBUSBA User manual

Kogan KACAMWBUSBA User manual

Kogan KACAMWBUSBA User manual

Related papers

Other documents