B l e n d i n g Hi g H Fide li t y An d Ar c H i t e c t u r e
®
SPECIFICATIONS SHEET
B l e n d i n g Hi g H Fi deli t y An d Ar c H i t e c t u r e
®
CALL 1-800-BUY-HIFI – 305.238.4373 – www.nilesaudio.com
8” 2-Way AT Advanced Technology In-Wall Loudspeaker
AT8
IN-WALL LOUDSPEAKER
• Tweeter can be rotated and pivoted
• Bafe-mounted bass and treble tone controls for acoustical adjustments
SPECIFICATIONS SHEET
NILES AUDIO CORPORATION 12331 SW 130 Street, Miami, FL 33186 1-800-BUY-HIFI- 305-238-4373 – www.nilesaudio.com
©2008 Niles Audio Corporation. All Rights Reserved. Niles, the Niles logo, and Blending High Fidelity and Architecture are registered trademarks of Niles Audio Corporation.
MicroPerf is a trademark of Niles Audio Corporation. All other trademarks are the property of their respective owners. CS0271A
8" In-Wall Loudspeaker
AT8
8" 2-Way AT Advanced Technology
In-wall Loudspeaker
Tweeter can be rotated and pivoted
Baffle-mounted bass and treble tone
controls for acoustical adjustments
Stock Number
FG00891
AT8 requires 8 Series Bracket Kit for installation.
Use FG00321 or FG00899 (sold separately)
Woofer Technology
■8" Interlaced glass and carbon-fiber cone is extremely rigid to reduce
breakup and lower distortion even under high power
■Butyl rubber cone surround damps resonance and provides
exceptional durability
■High BL magnet structure with vented pole piece ensures powerful
bass response
■Dispersion stabilizer distributes midrange tones for clear off-axis sound
Tweeter Technology
■Proprietary tweeter-adjustment mechanism ratchets in 1mm increments
and then pivots for precise aiming of high frequencies
■1" Tri-laminate Teteron dome with fluid-cooling and ultra-wide dispersion
for clear and detailed high-frequencies
Audiophile Features
■Premium crossover components provide seamless driver integration and
smooth sound
■Anti-resonant wave-bracing ABS baffle eliminates unwanted resonance to
keep bass tones rich and dynamic
Tone Controls
■Baffle mounted bass and treble controls allow easy access to adjust the
sound in any room
Installation
■Patented snap-in speaker baffle mounting mechanism facilitates quick
installations and upgrades
■100% rustproof MicroPerf™ aluminum grille conceals loudspeaker
elements yet allows full frequency sound through. Grille can be painted to
match décor
■Infrared sensor knockout provides a hidden remote control solution
Specifications
■Impedance: 6 ohm
■Recommended amplifier power: 10W to 150W
■Frequency response: 40Hz – 21kHz +/-3dB
■Sensitivity: 90dB for 2.83V pink noise
■Frame dimensions: 10 3/16" x 14 1/4" (26cm x 36.2cm)
■Hole cutout dimensions: 9 1/8" x 13 1/8" (23.2cm x 33.3cm)
■Depth behind ceiling: 3 5/8" (9.2cm) based on 1/2" drywall
Warranty: Lifetime limited
Shipping weight: 14 lbs. (6.4 Kg)
/
