Niles CM730 Specification

  • Hello! I am an AI chatbot trained to assist you with the Niles CM730 Specification. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
SPECIFICATIONS SHEET
CALL 1-800-BUY-HIFI or 305-238-4373 – www.nilesaudio.com
B L E N D I N G H I G H F I D E L I T Y A N D A R C H I T E C T U R E
®
7" Two-Way Ceiling Mount Loudspeaker with Pivoting Tweeter
CM730
7" CEILING MOUNT LOUDSPEAKER
7" Polypropylene Woofer
• 1" UltraSilk
®
Soft-Dome Tweeter
SPECIFICATIONS SHEET
Loudspeaker Model Works With
Model Stock Number Previous Bracket New Bracket Metal Enclosure Hole Cover
CM730 FG01297
NILES AUDIO CORPORATION 12331 SW 130 Street, Miami, FL 33186 1-800-BUY-HIFI 305-238-4373 www.nilesaudio.com
©2007 Niles Audio Corporation. All Rights Reserved. Niles, UltraSilk, Blending High Fidelity and Architecture and the Niles logo are registered trademarks of Niles Audio Corporation. MicroPerf
is a trademark of Niles Audio Corporation. CS0051B
P
RODUCT CONSTRUCTION AND ACCESSORIES
7
INCH CEILING MOUNT LOUDSPEAKER
7" Two-Way Loudspeaker with
Pivoting Tweeter
CM730
Stock Number
FG01297
Features
Integrated woofer/baffle design delivers greater low frequency response by employing a 7" woofer
where competitive models of the same outer size employ 6 1/2" woofers
Polypropylene cone is light, strong and well damped to provide “best in class” bass response
Butyl rubber surround damps resonance and provides exceptional durability
1" fluid-cooled UltraSilk
®
soft-dome tweeter provides for clear and detailed high frequency
response
Proprietary bridge-mounted tweeter-adjustment mechanism focuses the high frequency sound in
any direction up to 20º without diffraction
Includes flush-mount MicroPerf
aluminum grille for a clean and unobtrusive look
Weather resistant construction reduces installation limitations and provides unique solutions in
moist environments or outdoors under eaves
Specifications
Frequency Response: 59Hz to 21kHz +/-3dB
Impedance: 8 ohm nominal; 6 ohm minimum
Recommended Amplifier Power: 10 to 100 Watts
Frame Dimensions: 9 1/4 inches (23.49 cm)
Hole cutout dimensions: 8 inches (20.32 cm)
Depth behind ceiling: 4 3/8 inches (11.11 cm)
Warranty: Lifetime Limited
CE 6
FG00944
CM6 Series
Bracket Kit
FG00655
CM700 BKT
FG01308
CM700 Hole Cover
FG01309
9-1/4" (23.49 cm)
Frame Outer
Diameter
8" (20.32 cm)
Hole
Cutout
4-3/8" (11.11 cm) Depth
8" (20.32 cm)
Hole
Cutout
4-11/16" (11.90 cm) Depth
/