RS-403RTCSPB

Polibi RS-403RTCSPB User manual

  • Hello! I am an AI chatbot trained to assist you with the Polibi RS-403RTCSPB User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
ASSEMBLY INTRUCTIONS
ITEM CODE: WF292413
Page 01 Of 08
If you have any questions about the product,
please contact the email: [email protected]
SAFETY WARNINGS AND GENERAL NOTES
Page 02 Of 08
1. Fllow the infomation on the warnings on the bunk bed end structure and on the carton. Do not remove
the warning label from the bed
2. Always use the recommended size mattress on mattress support, or both, to help prevent the likelihood
of entrapment on falls
3. Do not allow children under 6 years of age to the upper bunk
4. Periodically check and ensure the guardrail, ladder and other components are in their proper position
free from darmage, and all connectorrs are tight
6. Always prohibit jumping on the bed
7. Prohibit more then one person on upper bunk.
8. Always use ladder for entering and leaving the upper bunk.
5. Do not allow horseplay on or under beds.
9. Do not use substitute parts. Contact the manufacturer or dealer for replacement parts.
10. Use of a night-light may provide added safely precaution for a child using the upper bunk.
11. Always use guardrails on both long sides of the upper bunk.
12. If the bunk bed will be placed next to a wall, the guardrail that runs the full length of the bed
should be placed against the wall to prevent entrapment between the bed and the wall.
13. The use of water or sleep flotation mattresses is prohibited
14. STRANGULATION HAZARD-Never attach or hang items to any part of the bunk bed that are
not designed for use with the bed.
15. Keep these instructions for future reference.
16. We recommend assembling your bunk bed on the shipping carton to protect your floor or carpet
17. Be certain all staples are out of the box before beginning assembly on the shipping carton.
18. ONLY USE THE MATTRESSES AS THE LIST BELOW FOR UPPER AND LOWER BEDS
Bed type Length Width Thickness
Twin Standard 74” – 75” 38 ½’’ 8’’ max
19. SURFACE OF MATTRESS MUST BE AT LEAST 5" (127MM) BELOW THE UPPER EDGE OF
GUARDRAILS.
20. Replacement Parts, including additional guardrails, may be obtained from any of our
(GIGACLOUD TECHNOLOGY (USA) INC) dealers;
Lower bed
DETAIL VIEW
Page 03 Of 08
A1
A2
B1
B2
C
C
C
C
D
D
D
D
E
E
F
BOX: WF292413
A1
Side rail - right (1pc)
Page 04 Of 08
A2 B1
Front panel (1pc)
B2
Back panel (1pc)
C
Car whell (4pcs)
D
Car rims (4pcs)
E
Car lights (2pcs)
F
Slats (8pcs)
Side rail - left (1pc)
HARDWARE LIST: WF292413
1 2 34
5 6 7 8
Hex - Head bolts
Ø1/4'' * 60 - 12pcs Hex - Head bolts
Ø1/4'' * 25 - 4pcs Horizontal - Hold bolts
Ø1/4'' - 12pcs
Canopy head though
Ø1/4'' - 4pcs
Allen key
K4 - 2pcs
Wood dowel
Ø8 * 30 - 8pcs Round head wood screw
M4 * 15 - 4pcs
Page 05 Of 08
Wood crews
M4 * 25 - 16pcs
STEP 1
Page 06 Of 08
41
Hex - Head bolts
Ø1/4'' * 60 - 12pcs Horizontal - Hold bolts
Ø1/4'' - 12pcs
5
Wood dowel
Ø8 * 30 - 8pcs
A1
B2
B1
A2
1
8
5
4
STEP 2
Page 07 Of 08
3
2
Hex - Head bolts
Ø1/4'' * 25 - 4pcs Canopy head though
Ø1/4'' - 4pcs
C
D
C
D
C
D
C
D
3
2
8
8
STEP 3
Page 08 Of 08
COMPLETED
76
Wood crews
M4 * 25 - 16pcs Round head wood screw
M4 * 15 - 4pcs
E
E
F
6
7
7
/