2. Home
  3. Domestic appliances
  4. Large home appliances
  5. Warming drawers
  6. Fisher & Paykel
  7. EB30PSX1
EB30PSX1

Fisher & Paykel EB30PSX1 User manual

  • Hello! I am an AI chatbot trained to assist you with the Fisher & Paykel EB30PSX1 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What is the overall width of the Fisher & Paykel EB30PSX1?
    What are the overall dimensions of the Fisher & Paykel EB30PSX1?
    What is the minimum cavity height for the Fisher & Paykel EB30PSX1?
    What is the minimum cavity depth for the Fisher & Paykel EB30PSX1?
    What is the minimum cavity width for the Fisher & Paykel EB30PSX1?
PLANNING GUIDE
30" TRIPLE STACK
PROFESSIONAL STYLE
—
Details for Flush Installation
PLANNING GUIDE
0" Professional Triple Stack
DATE: 09.11.2021
IMPORTANT: Throughout this guide, dimensions may vary by ±2mm (1/16'').
Read the installation guide for detailed information on installing the product.
For full installation instructions and specifications visit fisherpaykel.com
This Planning Guide outlines the specific installation of a flush finish with front
cabinetry for the 0" Triple Stack, with Professional Style appliances.
Cabinetry dimensions and construction contained in this document are a
guideline only and will need to be adapted to suit specific location, cabinetry
materials and construction methods.
Please consult individual product literature for full installation instructions.
Contemporary and Minimal Style appliances have different cabinetry
requirements, please refer to separate Planning Guide for these specifications.
DATE: 18 November, 2021
IMPORTANT: Throughout this guide, dimensions may vary by ±2mm (1/16'').
Read the installation guide for detailed information on installing the product.
For full installation instructions and specifications visit fisherpaykel.com
COMBINATION OVERVIEW
0" Professional Triple Stack
Oven, 0"
Shown with Long Trim fitted (supplied with Oven)
Vacuum Seal Drawer, 0" or
Warming Drawer, 0"
Coffee Maker, 0" interchangeable with
Speed Oven, 0" or
Steam Oven, 0"
DATE: 18 November, 2021
IMPORTANT: Throughout this guide, dimensions may vary by ±2mm (1/16'').
Read the installation guide for detailed information on installing the product.
For full installation instructions and specifications visit fisherpaykel.com
OVERALL DIMENSIONS
0" Professional Triple Stack
14mm
56 7/16"
761mm
29 15/16"
617mm
24 5/16"
Minimum overall depth
required for front
panel and cavity
Overall height of products
Width of products
1 2
STYLE
Coffee Maker, 30"
Speed Oven, 30"
Steam Oven, 30"
Oven, 30"
Vacuum Seal Drawer, 30"
Warming Drawer, 30"
PROFESSIONAL EB0PSX1 OM0NPX1 OS0NPX1 OB0SPPTX1 VB0SPEX1 WB0SPEX1
3
UPPER PRODUCT FUNCTION OVEN DRAWER FUNCTION
Coffee Maker, 0"
Speed Oven, 0" Oven, 0"
(shown with Long Trim fitted)
Vacuum Seal Drawer, 0"
Warming Drawer, 0"
KEY PRODUCT DECISIONS
++
Steam Oven, 0"
KEY PRODUCT DIMENSIONS
0" Professional Triple Stack
SPEED OVEN, 0"
OVEN, 0"
Shown with Long Trim fitted
WARMING DRAWER, 0" VACUUM SEAL DRAWER, 0"
STEAM OVEN, 0"COFFEE MAKER, 0"
470mm
18 1/16"
757mm
29 1/16"
9mm
1 9/16"
689mm
27 1/8"
760mm
29 15/16"
42mm
1 5/8"
271mm
10 11/16"
761mm
29 15/16"
20mm
1/16"
271mm
10 11/16"
761mm
29 15/16"
20mm
1/16"
(Includes installation
washer)
470mm
18 1/16"
757mm
29 1/16"
9mm
1 9/16"
470mm
18 1/16"
757mm
29 1/16"
9mm
1 9/16"
DATE: 18 November, 2021
IMPORTANT: Throughout this guide, dimensions may vary by ±2mm (1/16'').
Read the installation guide for detailed information on installing the product.
For full installation instructions and specifications visit fisherpaykel.com
LOWER TRIM DETAIL OF UPPER PRODUCT
0" Professional Triple Stack
9/16"
15mm
/8"
10mm
DETAIL A - COFFEE MAKER
PROFILE VIEW
DETAIL B - COOK PRODUCT
PROFILE VIEW
COFFEE MAKER
PROFILE VIEW
COOK PRODUCT
PROFILE VIEW
IMPORTANT
The Coffee Maker and Cook Product (Speed Oven or Steam Oven) share
the same overall front frame dimensions H x W x D. However there is a
critcal difference in the relationship between the front frame with the base
of the chassis. This dimensional difference between the Coffee Maker and
Cook Product, results in the Coffee Maker requiring additional cabinetry
components. These details are outlined in the following pages.
A
B
9mm
1 9/16"
9mm
1 9/16"
470mm
18 1/16"
470mm
18 1/16"
DATE: 18 November, 2021
IMPORTANT: Throughout this guide, dimensions may vary by ±2mm (1/16'').
Read the installation guide for detailed information on installing the product.
For full installation instructions and specifications visit fisherpaykel.com
CABINETRY OVERVIEW
0" Professional Triple Stack
IMPORTANT
– Shelves must be constructed from materials that will support weight of appliances.
– The cabinetry materials must be able to withstand heat.
– During installation appliances may need to be shimmed for precise alignment between products and cabinetry.
– Power cable requirements and cable outlet position can be found by consulting individual product installation manuals.
– Consult individual product installation manuals for complete product and cabinetry requirements
Anti-tip Bracket x2
(Vacuum Drawer only)
Cabinetry carcass
Shelf above Coffee
Maker or Cook Product
Shelf below Drawer
Dividing shelf
This is an overview of cabinetry construction and product installation.
Please see following pages for further details.
Rebate for Oven and
Coffee Maker or Cook
Product
22 1/16"
560mm
CRITICAL DIMENSION
Additional sidewalls for
securing Coffee Maker
CRITICAL
Front panel below
Drawer
Front panel above
Coffee Maker or
Cook Product
Spacer for Coffee Maker
DATE: 18 November, 2021
IMPORTANT: Throughout this guide, dimensions may vary by ±2mm (1/16'').
Read the installation guide for detailed information on installing the product.
For full installation instructions and specifications visit fisherpaykel.com
CABINETRY OVERVIEW
0" Professional Triple Stack
Cabinetry carcass
Adjacent Cabinet
This is an overview of cabinetry construction and product installation.
Please see following pages for further details.
Rebate for Oven and
Coffee Maker or Cook
Product
Black clashing recommended
on front facing edges where
products are located and on
side cabinets where cabinet is
rebated.
1/16"
20mm
Front panel thickness used for
this installation scenario.
Rebate also required for Drawer
if cabinetry panels thinner.
CRITICAL REBATE for flush installation of Oven and Coffee Maker or
Cook Product. Distance measured from front of cabinetry panels.
1 5/8"
42mm
Additional side walls
(Coffee Maker only)
DATE: 18 November, 2021
IMPORTANT: Throughout this guide, dimensions may vary by ±2mm (1/16'').
Read the installation guide for detailed information on installing the product.
For full installation instructions and specifications visit fisherpaykel.com
EXPLODED VIEW WITH COFFEE MAKER
0" Professional Triple Stack
Oven Installation Washer x2
Oven, 0"
(Long Trim shown)
Vacuum Seal Drawer, 0"
(Interchangeable with Warmer Drawer)
Coffee Maker, 0"
(Interchangeable with Speed Oven or
Steam Oven, refer following page)
IMPORTANT
During installation appliances may need to be shimmed for precise alignment
between products and cabinetry.
Long Trim for flush finish
(Fitted during installation, supplied
with Oven)
Spacer for Coffee Maker
(Not required for Speed Oven or Steam Oven)
Side walls for Coffee Maker x2
(Not required for Speed Oven or Steam Oven)
Anti-tip Bracket x2
(Vacuum Drawer only)
DATE: 18 November, 2021
IMPORTANT: Throughout this guide, dimensions may vary by ±2mm (1/16'').
Read the installation guide for detailed information on installing the product.
For full installation instructions and specifications visit fisherpaykel.com
EXPLODED VIEW WITH COOK PRODUCT
0" Professional Triple Stack
Anti-tip Bracket x2
(Vacuum Drawer only)
Oven Installation Washer x2
Oven, 0"
(Long Trim shown)
Vacuum Seal Drawer, 0"
(Interchangeable with Warmer Drawer)
Speed Oven, 0" or
Steam Oven, 0"
(Interchangeable with Coffee Maker,
refer previous page)
Long Trim for flush finish
(Fitted during installation, supplied
with oven)
IMPORTANT
During installation appliances may need to be shimmed for precise alignment
between products and cabinetry.
CABINETRY DIMENSIONS
0" Professional Triple Stack
575mm
SIDE ELEVATION
with front panels
FRONT ELEVATION
without front panels
SIDE ELEVATION
without front panels
145mm
Rebate for front trim
of Oven and Coffee
Maker or Cook Product
to achieve flush finish
SEALED CAVITY
22 5/8"
56 1/2"
IMPORTANT NOTE:
MINIMUM and CRITICAL dimensions are stated to meet product installation requirements
and compliance standards. Where these dimensions are not adhered to product safety and
performance may be compromised, along with undesirable fit in cabinetry.
952mm
7 1/2"
462mm
18 /16"
21mm
1/16"
1164mm
45 1/16"
724mm
28 1/2"
762mm
0"
560mm
22 1/16"
CRITICAL
617mm
24 5/16"
145mm
56 1/2"
50mm
2"
271mm
10 11/16"
MINIMUM
MAXIMUM
MINIMUM MINIMUM
RECOMMENDED MINIMUM
42mm
1 5/8"
CRITICAL
Distance between
cabinetry front panels
Height of rebate
for Oven and
Coffee Maker or
Cook Product
Height to bottom
of rebate (top of
Drawer chassis)
Depth clearance for oven chassis
MINIMUM
Allows 2mm
height clearance
above appliance
Ventilation of 2” x 22 1/16” (50mm x 560mm)
or totalling 4.4in2 (280cm2) is required for
Coffee Maker and Cook Products. The air vent
must be located at the rear of cabinet, it can be
positioned at the base, top, sides, or back.
MINIMUM
AIR VENT
Shelf thickness
20mm
1/16"
Front panel thickness.
Alternate thickness can
be used
Ensures the Oven cooling
system functions correctly.
Width clearance for Oven chassis
Overall cabinet width
Width between additional sidewalls
(Coffee Maker only)
Overall depth of front panel and cavity
Combined
height
clearance for
Oven chassis
and Drawer
chassis
MINIMUM
Overall height
between top
and bottom
shelves
ADDITIONAL SIDE WALL
(Coffee Maker only) 455mm
17 15/16"
Cavity height
for chassis
clearance
97mm
8 5/16"
Height from
top of bottom
shelf to top
of dividing
shelf to
achieve mm
gap between
Oven and
Coffee Maker
or Cook
Product
5mm
/16"
Spacer required
for Coffee Maker.
Refer page 7
detailing lower
trim detail of
upper products.
760mm
29 15/16"
Width of cabinetry front panels
RECOMMENDED
FRONT PANEL
CRITICAL
INSTALLATION DETAILS - PROFILE VIEW
0" Professional Triple Stack
Oven, 0"
Dividing Shelf
Speed Oven or
Steam Oven
DETAIL A
PROFILE VIEW
DETAIL C
PROFILE VIEW
DETAIL B2 - COOK PRODUCT
PROFILE VIEW
MINIMUM
1/8"
mm
1/16"
2mm
MINIMUM
1/16"
2mm
MINIMUM
Coffee Maker,
Speed Oven or
Steam Oven
Shelf above product
Front panel
1/16"
20mm
Vacuum Drawer or
Warmer Drawer
Shelf below product
Front panel
1/16"
20mm
Overall height of Coffee
Maker or Cook Product
689mm
27 1/8"
Overall height of Oven, 0"
271mm
10 11/16"
Height of Drawer chassis
A
B
C
PROFILE VIEW
470mm
18 1/16"
Oven, 0"
Dividing Shelf
Coffee Maker
DETAIL B1 - COFFEE MAKER
PROFILE VIEW
MINIMUM
1/8"
mm
Spacer *
/16"
5mm
*NOTE: Shims are supplied
with Coffee Maker, however an
additional spacer or shims will be
required to achieve this solution.
DATE: 18 November, 2021
IMPORTANT: Throughout this guide, dimensions may vary by ±2mm (1/16'').
Read the installation guide for detailed information on installing the product.
For full installation instructions and specifications visit fisherpaykel.com
INSTALLATION DETAILS - PLAN VIEW
0" Professional Triple Stack
Oven, 0"
DETAIL D1 - COFFEE MAKER OR COOK PRODUCT with rebate
PLAN VIEW
DETAIL D - DRAWER
PLAN VIEW
DETAIL D2 - OVEN with rebate
PLAN VIEW
Front Panel
1/16"
20mm
Side wall,
adjacent cabinet
Coffee Maker,
Speed Oven or
Steam Oven
Side wall,
appliance cabinet
Front Panel
1/16"
20mm
Side wall,
adjacent cabinet Screw
Installation washer
Side wall,
appliance cabinet
Front Panel
1/16"
20mm
Side wall,
adjacent cabinet
Drawer, 0"
Side wall,
appliance cabinet
762mm
0"
764mm
0 1/16"
MINIMUM
*NOTE: Dimensions based on 1/16" (1.5mm)
clearance between Drawer and adjacent panels.
Product widths vary, consult detail views D1 and
D2 for Oven and Coffee Maker or Cook Product
clearances.
*Note: If Front Panel
is thinner than 1/16"
(20mm) a rebate
for the Drawer is
required to achieve a
flush finish.
1/16"
1.5mm
1/16"
20mm
1/8"
.5mm
1 5/8"
42mm
1 5/8"
42mm
D
PLAN VIEW
Appliance cabinet width
RECOMMENDED *
Distance between adjacent front panels
1/8"
.5mm
THESE INSTRUCTIONS ARE FOR THESE SPECIFIC
INSTALLATION SCENARIOS. OTHER CABINETRY
CONSTRUCTION METHODS ARE POSSIBLE. PLEASE CONSULT
PRODUCT INSTALLATION MANUALS FOR FULL PRODUCT
SPECIFICATIONS AND CLEARANCE REQUIREMENTS.
IMPORTANT: The product dimensions and specifications
applyat the date of issue. Under our policy of continuous
product improvement, these dimensions and specifications
may change at any time. Dimensions may vary by ±2mm (1/16").
Please read the installation guide for detailed information
oninstalling the product or visit fisherpaykel.com.
November 2021
/