Infrared Thermometer iG-R5
measures the body temperature
based on the infrared energy
emitted from the forehead.
Users can quickly get measure-
ment results after positioning
properly the temperature probe
on the forehead.
I. Remove the battery cover,
insert the batteries in
accordance with the positive
and negative pole indications,
then install the battery cover.
2. Click the measure button once
to power it on, if display shows
‘Body Temp' it means it is ready
to measure body temperature. If
the display does not show 'Body
Temp' it means it is ready to
measure surface temperature.
3. Click the measure button
twice to toggle between body
temperature and surface
temperature.
4. Click the measure button
three times to toggle between
DEG C/F.
5. Please note: Do not press the
measure button while you install
batteries. If display shows any
unknown content, please
reinstall batteries.
Instructions