ByoPlanet MS-700 is a commercial-grade electrostatic sprayer designed for both indoor and outdoor use. It utilizes electrostatic charge to improve spray coverage and reduce product waste. Ideal for sanitizing large areas, the MS-700 can be used with ByoPlanet-approved disinfectants and cleaning solutions.
ByoPlanet MS-700 is a commercial-grade electrostatic sprayer designed for both indoor and outdoor use. It utilizes electrostatic charge to improve spray coverage and reduce product waste. Ideal for sanitizing large areas, the MS-700 can be used with ByoPlanet-approved disinfectants and cleaning solutions.
ByoPlanet.com
OPERATOR'S MANUAL
For Indoor and Outdoor
Commercial Use
For service and support, contact
www.ServiceTechTeam.com.
Operator’s
Manual
ENGLISH | 2–11
SAFETY NOTICES
Warnings 3
Safety Decal 4
Protective Gear 5
IMPORTANT SAFETY PRECAUTIONS
Power Connection 5
Grounding Instructions 5
Extension Cord 5
Shock/Electrical Hazard 6
General Safety 6
Chemicals 6
SYSTEM COMPONENTS
MS-700 Electrostatic Sprayer Base Unit 7
MS-700 Electrostatic Sprayer 7
OPERATING INSTRUCTIONS
Preparing the Spray Area 8
Unit Operation/Setup 8
Sprayer Operation During Cleaning 8
Changing ByoPlanet-Approved Products 8
After Use and Storage 8
MAINTENANCE
Exterior Frame 9
Peristaltic Pump 9
SPECIFICATIONS 10
TROUBLESHOOTING 10
EQUIPMENT WARRANTY 11
Table of Contents
2 | ENGLISH BYOPLANET.COM
SAFETY NOTICES
WARNINGS
WARNINGS
WARNINGS
This manual contains information that is important for you
to know and understand before operating the ByoPlanet®
MS-700™ Electrostatic Sprayer. This information relates to
protecting your safety and ensures product reliability and
performance. It is the owner’s responsibility to ensure that
all who operate this equipment read this manual.
Warnings
To help you recognize this information we use the warning
symbols below. Please read the manual carefully, and pay
special attention to the symbols and warning labels. Warning
labels indicate a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
FIRE, EXPLOSION AND ELECTRIC SHOCK HAZARD
Flammable fumes, such as solvent and paint fumes, in
work areas can ignite or explode. To help prevent re,
explosion and electric shock:
• Electrostatic equipment must be
used only by trained, qualied
personnel who understand the
requirements of this manual.
• Stop operation immediately if
static sparking occurs or you feel
shock. Do not use equipment
until you identify and correct the
problem.
• Use and clean equipment only
in well-ventilated area.
• Never spray a ammable
chemical (with a ash point
less than 140°F [60°C]).
• Do not plug or unplug power
cords or turn lights on or off when
ammable fumes are present.
• Keep spray area free of debris,
including solvents, rags,
gasoline or any ammable
chemicals.
• Keep a working re extinguisher
in the work area.
ENGLISH | 3
BYOPLANET.COM
WARNINGS
PLASTIC PARTS CLEANING SOLVENT HAZARD
Many solvents can degrade plastic parts and cause them
to fail, which can lead to serious injury or property
damage. In order to help prevent against degradation:
• Use only compatible
water-based solvents to clean
plastic structural pressure
containing parts.
• See technical data in this and
all other equipment instruction
manuals. Read uid and solvent
manufacturer’s Safety Data
Sheets (SDS) and recommenda-
tions prior to use.
• Read and fully understand the ByoPlanet® MS-700™
Electrostatic Sprayer Operator’s Manual prior to using
the electrostatic sprayer.
• Read and fully understand ByoPlanet-approved
product labels prior to using any liquid product with
the ByoPlanet® MS-700™ Electrostatic Sprayer.
• Electrostatic Sprayers produce signicant electrostatic
charge that improves spray coverage. Charge can
accumulate on sprayed objects or the person
conducting the spraying operations. Touching
objects after building up charge may produce a shock
or a spark from the discharge of the electrostatic
charge, especially in low humidity environments.
This electrostatic discharge may startle operators.
Use caution when immediately touching objects that
have been sprayed. Large objects subject to charge
accumulation, such as vehicles, must be grounded.
Operators should wear conductive footwear or use
grounding straps.
• Never operate electrostatic sprayers in the
presence of combustible liquids or vapors.
Electrostatic charges can produce sparks that may
ignite combustible liquids or vapors causing serious
injury, death, or damage to property.
• ByoPlanet® MS-700™ Electrostatic Sprayers are for
both indoor and outdoor commercial use. Bystanders
and pets should not be in the area during application.
• ByoPlanet® MS-700™ Electrostatic Sprayers should
not be operated below 55°F (12.5°C).
• ByoPlanet® MS-700™ Electrostatic Sprayers should
never be used in any area containing volatile
chemicals, nor should they be used in hazardous
environments or any area containing volatile or
explosive levels of gas, vapor or airborne particles.
• ByoPlanet® MS-700™ Electrostatic Sprayers should
never be used by untrained personnel.
• Check hoses, tubes
and couplings daily.
Replace worn or
damaged parts
immediately.
PRESSURIZED EQUIPMENT HAZARD
Fluid from equipment that leaks or ruptures from a
component can splash in the eyes or on skin, causing
serious injury. In order to help prevent a leak or rupture:
WARNINGS
WARNINGS
• Do not operate the unit when
fatigued or under the inuence
of drugs or alcohol.
• Use uids and solvents that are
compatible with equipment wetted
parts. See technical data in all
equipment manuals. Read uid
and solvent manufacturer’s
warnings. For complete information
about your material, request SDS
from distributor or retailer.
• Do not leave the work area while
equipment is energized.
• Turn off all equipment when not
in use.
• Check equipment daily. Repair or
replace worn or damaged parts
immediately with genuine
replacement parts from trusted
ByoPlanet® partners only.
• Do not alter or modify equipment.
Alterations or modications void
your ByoPlanet® MS-700™
warranty and agency approvals,
and create safety hazards.
• Route hoses and power cords away
from trafc areas, sharp edges,
moving parts and hot surfaces.
CHEMICAL USE HAZARD
Each chemical, such as a disinfectant, has a unique set
of hazards and needs to be handled properly to ensure
worker safety.
• The ByoPlanet® MS-700™ Electrostatic Sprayer can
only be used with products that have been approved
by ByoPlanet®. Never spray any liquid product that is
not a ByoPlanet®-approved product. The ByoPlanet®
MS-700™ Electrostatic Sprayer warranty is voided if
the ByoPlanet® MS-700™ Electrostatic Sprayer is used
with products that are not approved by ByoPlanet®.
Be aware that many chemical liquids can be harmful
if they are not used properly.
• Read and understand the ByoPlanet®-approved
product’s SDS and label prior to use.
• Be aware of rst-aid procedures related to the
product in use.
• It is a violation of Federal law to use a chemical in
a manner inconsistent with its label.
• Use personal protective equipment as detailed by
the ByoPlanet®-approved product’s SDS.
• For use with non-ammable, non-combustible and
non-volatile uids only. Never spray a ammable
chemical (ash point less than 140°F [60°C]).
• Ensure the area being sprayed has proper ventilation.
• Store all chemicals in original containers in a cool,
dry place, away from heat and open ames.
• Do not reuse or rell a chemical container.
• To dispose of ByoPlanet®-approved products refer
to product labels.
Safety Decal
This decal is located on the top-most deck surface forward
of the bottle storage location.
PERSONAL PROTECTIVE EQUIPMENT
Wear appropriate protective equipment when in the work
area to help prevent serious injury.
• Refer to product specic ByoPlanet® Safety Data
Sheets (SDS) for any additional Personal Protective
Equipment (PPE).
EQUIPMENT MISUSE HAZARD
Misuse can cause death or serious injury
4 | ENGLISH BYOPLANET.COM
WARNINGS
•
•
•
•
•
•
•
•
•
Always wear appropriate Personal Protective
Equipment (PPE), as detailed in the User
Manual, when using this device. Refer to
product specific ByoPlanet® Safety Data
Sheets (SDS) for any additional PPE.
Follow instructions and precautions listed on
ByoPlanet® manufacturing product labels.
Only use ByoPlanet®-approved products through
the ByoPlanet® MS-700™ Electrostatic Sprayer.
Inspect power cord, sprayer and external tubing
for damage prior to use. DO NOT use if damage
is present.
Always use with a grounded electrical plug
and outlet.
Use device only as intended. Direct spray only
toward appropriate surfaces.
Cuando use este dispositivo, siempre use el equipo de
protección personal (EPP) apropiado, como se detalla
en el Manual del Usuario. Consulte las Fichas de Datos
de Seguridad (SDS) para cualquier EPP adicional.
Siga las instrucciones y precauciones que se listan en
las etiquetas de fabricación del producto ByoPlanet
®
.
Utilice solamente productos ByoPlanet
®
aprobados
por el Atomizador Electrostático MS-700™.
Antes de usarlo inspeccione el cable de electricidad, el
atomizador y la tubería externa por daños. NO lo use si
hay daños presentes.
Siempre usarlo con un enchufe y toma de corriente
eléctrica con conexión a tierra.
Solamente utilice el dispositivo para lo que fue
diseñado. Solo rocié directamente en las superficies
adecuadas.
Au moment d’utiliser le pulvérisateur, toujours porter
un équipement de protection personnelle (ÉPP)
adéquat, tel que décrit dans le manuel de l’utilisateur.
Se reporter à la fiche signalétique du produit nettoyant
ByoPlanet
®
afin de connaître tout autre ÉPP requis
pour son emploi.
Suivre les instructions et les mises en garde indiquées
sur l’étiquette d’origine de chaque produit ByoPlanet
®
.
Utiliser le pulvérisateur électrostatique MS-700™
uniquement avec les produits ByoPlanet
®
approuvés
à cette fin.
Avant l’emploi, inspecter le cordon d’alimentation,
l’appareil lui-même et les tubes externes pour vérifier
l’absence de dommages. NE PAS utiliser le
pulvérisateur en présence de dommages.
Toujours brancher le pulvérisateur dans une prise de
courant avec mise à la terre.
Utiliser le pulvérisateur strictement selon le mode
d’emploi. Toujours diriger le jet directement vers les
surfaces à traiter.
•
•
•
•
•
•
•
•
•
Protective Gear
Personal Protective Equipment (PPE) must comply with the
American National Standards Institute’s ANSI Z87.1-1989
standard if purchased after July 5, 1994, or ANSI Z87.1-1968
or with the standard of the country in use.
• Eye and face PPE shall be distinctly marked to facilitate
identication of the manufacturer. (1910.133[a][4]).
• The following minimum requirements must be met by all
protective devices. Protectors shall:
- Provide adequate protection against the particular
hazards for which they are designed
- Be of safe design and construction for the work to be
performed
- Be reasonably comfortable when worn under the
designated conditions
- Fit snugly and not unduly interfere with the movements
of the wearer
- Be durable
- Be capable of being disinfected
- Be easily cleanable
- Be distinctly marked to facilitate identication only of
the manufacturer
THE USE OF EYE WEAR PROTECTION IS RECOMMENDED AS
MINIMUM PPE WHEN USING THIS DEVICE.
ALWAYS USE APPROPRIATE PPE, LISTED ON THE
BYOPLANET®-APPROVED PRODUCT’S SAFETY DATA
SHEET (SDS).
ByoPlanet® SDSs CAN BE FOUND AT:
WWW.SERVICETECHTEAM.COM
When using an electrical appliance, it is important to
understand that some circuits are electrically live, even
when the power switch is in the off position. Basic safety
precautions should always be followed to reduce the risk
of burns, re, electrical shock, injury and/or death.
Power Connection
Our power plug must be used with a three-pronged, ground-
ed outlet, rated for no less than 15A service. Always verify
before product use. This appliance is for use on a nominal
120V/60Hz circuit with a veried ground plug. Check with a
qualied electrician to ensure you have the correct electrical
service and grounding.
Grounding Instructions
This appliance must be grounded. In the event of malfunction
or breakdown, grounding provides a path of least resistance
for an electric current to reduce the risk of electric shock.
This appliance is equipped with a cord having an equip-
ment-grounding conductor and a grounding plug. The plug
must be plugged into an appropriate outlet that is properly
installed and grounded in accordance with all local codes and
ordinances. Never use an adapter that removes the ground
connection with this device.
DANGER: Improper connection of the equipment-grounding
conductor can result in a risk of electric shock. The conductor
with insulation having an outer surface that is green, with or
without yellow stripes, is the equipment-grounding conduc-
tor. If repair or replacement of the cord or plug is necessary,
do not connect the equipment-grounding conductor to a live
terminal. Check with a qualied electrician or serviceman if
the grounding instructions are not completely understood or
if in doubt as to whether the appliance is properly grounded.
Do not modify the plug provided with the appliance — if it will
not t the outlet, have a proper outlet installed by a qualied
electrician. Never use an adapter that removed the ground
connection with this device.
Extension Cord
ByoPlanet® provides a 25-foot (7.6m) extension cord with
each ByoPlanet® MS-700™ Electrostatic Sprayer and
strongly recommends that you use this approved extension
cord. Make sure your extension cord is in good condition.
Inspect cords periodically and replace if damaged. If an
alternate extension cord is used, be aware that an undersized
extension cord will cause a drop of in-line voltage, which
could result in a loss of power, damage to the product and/or
overheating. Always use a sufciently rated extension cord.
IMPORTANT: ByoPlanet® recommends using a 12/3 gauge
extension cord, no longer than 100 feet (30.5m). For outside
or wet environment application, use a GFCI (ground fault
circuit interrupter) in-line adapter or outlet to help avoid risk
of electrical shock. The GFCI should be placed as close to the
outlet as possible.
IMPORTANT SAFETY PRECAUTIONS
ENGLISH | 5
BYOPLANET.COM
Shock/Electrical Hazard
As with most electrical appliances, electrical parts are
electrically live even when the switch is off. To reduce
the risk of burns, re, electric shock or injury:
1. Use this unit only for its intended use, as described
in this manual.
2. Do not use while bathing.
3. Do not place or store unit where it can fall or be pulled
into water or other liquid.
4. If unit falls into water, unplug immediately. Do not reach
into water to retrieve.
5. Never operate this unit if it has been dropped, damaged
or is working improperly. Contact Service Tech Team at
www.servicetechteam.com.
6. Keep the cord away from heated surfaces.
7. Never block the air openings of the unit or place it on a
soft surface (bed or couch), where the air openings may
become blocked.
8. Never drop or insert any object into any opening.
9. Do not use with a damaged or broken power cord.
10. Do not attempt to operate if the unit if the device
temperature is below 55°F (12.5°C). If stored below 55°F
(12.5°C), move the unit to a warm environment and allow
the unit to acclimate before operation.
11. Never store at a temperature below 32°F (0°C) or
above 140°F (60°C).
12. This unit may be warm when in use. Do not let heated
surface touch bare skin.
CAUTION: Electrostatic nozzle. Do not touch or insert any
foreign object into the nozzle.
General Safety
Lack of attention to safety can result in reduced efciency,
accidents, personal injury or death. Watch for safety hazards
and correct deciencies promptly. Use the following safety
precautions as a guide when using this machine.
1. Read the operator’s manual. Failure to do so is
considered misuse of the equipment.
2. Use the ByoPlanet® MS-700™ Electrostatic Sprayer unit
only for its intended use, as described in this manual.
3. Before operating equipment, become familiar with all
caution and warning decals afxed to the equipment.
4. Do not use the ByoPlanet® MS-700™ Electrostatic
Sprayer in a hazardous location.
5. Only trained personnel familiar with the ByoPlanet®
MS-700™ Electrostatic Sprayer and ByoPlanet®-approved
products should be allowed to operate.
6. Do not allow personnel to operate the sprayer without
proper instruction or under the inuence of alcohol or
drugs.
7. Use an extension cord meeting or exceeding the
specication detailed in the Extension Cord section.
8. Store sprayer in a cool, dry place. Do not expose to
extreme temperatures. Do not store sprayer outdoors.
9. Purge liquid line before storing the unit.
10. Be aware, even when the sprayer is off, power is still
supplied to the unit when plugged into an electrical outlet.
11. Never hang unit from cord.
12. A sprayer should never be left unattended when plugged in.
13. A resettable breaker is provided on the rear of the unit.
It will trip if the unit experiences an electrical short.
14. Always turn off sprayer after each application and
before unplugging.
15. Always unplug unit from outlet when not in use or when
leaving it unattended.
16. Never unplug by pulling the cord or with wet hands.
Always unplug by grasping the plug.
17. Do not pull or carry the sprayer by the power cord,
nozzle or nozzle cord.
18. Do not crimp the cord or strain it around sharp edges,
as doing so might damage the cord.
19. Do not use the ByoPlanet® MS-700™ Electrostatic
Sprayer with a damaged power cord.
20. Always thoroughly inspect product before usage.
For questions or concerns about the ByoPlanet®
MS-700™ Electrostatic Sprayer, contact Service
Tech Team at WWW.SERVICETECHTEAM.COM.
Chemicals
The ByoPlanet® MS-700™ Electrostatic Sprayer can only be
used with products that have been approved by ByoPlanet®.
The ByoPlanet® MS-700™ Electrostatic Sprayer warranty is
voided if the ByoPlanet® MS-700™ Electrostatic Sprayer is
used with products that are not approved by ByoPlanet®.
Be aware that many chemical liquids can be harmful if they
are not used properly.
1. Always use appropriate personal protective equipment
(PPE) when operating the ByoPlanet® MS-700™ Electro-
static Sprayer. Refer to product SDS for proper PPE.
2. Follow the liquid product label and SDS for proper
storing, handling and disposing of any liquid products
used in the ByoPlanet® MS-700™ Electrostatic Sprayer.
3. Know the length of time required by each liquid product
application before allowing people and pets to return to
the sprayed area.
4. Tampering with ByoPlanet®-approved products, product
containers and the ByoPlanet® MS-700™ Electrostatic
Sprayer in any form will void the customer warranty.
5. To dispose of ByoPlanet®-approved products refer to
product labels.
6. If liquid products come into contact with your skin
or eyes, please refer to product label and SDS.
7. Never aim the sprayer at yourself, another person
or a pet.
8. Do not mix chemicals unless specically directed
on the product SDS and label.
IMPORTANT: Safety data sheets (SDS) are available for all
liquid products that have been approved for use in the
ByoPlanet® MS-700™ Electrostatic Sprayer. These SDSs will
inform you of any hazards and precautions of which you
should be aware. All employees that use the product must
be aware of and have access to the SDS. They should also be
trained for and aware of their safety while working with liquid
products. It is the responsibility of the owner of the
equipment to obtain an SDS from ByoPlanet® for each
chemical used. Visit WWW.SERVICETECHTEAM.COM
for more information.
6 | ENGLISH BYOPLANET.COM
SYSTEM COMPONENTS
The patented MS-700™ Electrostatic Sprayer was engineered
with the end-user in mind. It is durable, highly mobile and
incredibly effective for electrostatic delivery.
The peristaltic pump is the only eld-serviceable component.
If you are experiencing issues with your device, please con-
tact Customer Support at WWW.SERVICETECHTEAM.COM.
MS-700™ Electrostatic Sprayer Base Unit
1. Air Compressor
Atomizes and propels the liquid. Includes built-in auto-re-
setting thermal safeguard against compressor overheating.
2. Non-Marking Wheels
Large wheels, for easy transport and maneuverability,
will not leave scuff marks. Do not require ination.
3. Sprayer Connect Line
Connect line consists of three components: electrical
line, liquid line and air line. The connect line connects the
sprayer to the base unit.
4. Sprayer Holster
Holds the sprayer.
5. Handle Adjust Buttons
Adjusts handle height. (Squeeze to adjust.)
6. Removable Drip Cup
Collects any dripping from the sprayer.
7. Adjustable Handle
Handle position is raised, lowered and rotated by the two
button snaps.
8. Peristaltic Pump
Provides liquid up to sprayer.
9. Circuit Breaker
User resettable circuit breaker and will only
trip if a short occurs in the base unit.
10. Main Power Switch
Powers system to a ready state.
11. 1-Gallon (3.8 Liters) Product containers
Product Containers (not included with equipment).
12. Extension Cord Holder
Located at the rear of the unit for extension cord storage.
13. Cord Management Hook
Stores or hangs the extension cord.
14. Frame
Base casing designed for long-term durability.
15. Sprayer Electrical Disconnect
Electrical connection for sprayer.
16. Reservoir
A reservoir to ensure a consistent liquid ow.
17. Dispensing Cap
Allows solution to ow from the bottle to the liquid line.
MS-700™ Electrostatic Sprayer
1. Sprayer Button
1-click functionality / operates the sprayer/device.
2. Main Control Panel
Indicates the power, sprayer and electrostatics are on.
3. Nozzle Cover
Located on the front of the sprayer.
4. Spray Wand Handle
Handle positioned for ambidextrous use.
5. Loom Assembly
Connect line consists of three components: electrical
line, liquid line and air line.
ENGLISH | 7
BYOPLANET.COM
Preparing the Spray Area
1. Clean gross lth by using standard manual cleaning
protocols.
2. Close the room to the general public for cleaning. Place
signs or warning indicators on doors that indicate no one
should enter the room.
3. Power off any sensitive electrical devices. Devices do not
need to be unplugged.
Unit Operation/Setup
1. Choose the appropriate ByoPlanet®-approved product
for cleaning, sanitizing or disinfecting.
2. Put on appropriate PPE. See section on PPE on page 5.
3. Mount desired ByoPlanet®-approved product on
ByoPlanet® MS-700™ Electrostatic Sprayer base. Ensure
that the bottles are positioned with the opening facing
up and towards the dispensing tubes.
4. Unscrew the lid on the ByoPlanet®-approved product of
your choice, remove seal (if present), and connect the
ByoPlanet® MS-700™ Electrostatic Sprayer dispensing
cap to the bottle. Be sure the cap is screwed all the way
down; do not over-tighten.
5. Unwrap electrical cord completely and plug ByoPlanet®
MS-700™ Electrostatic Sprayer into a grounded,
three-pronged outlet. See EXTENSION CORD section
for extension cord specications.
NOTE: For outside or wet environment application, use
a GFCI (ground fault circuit interrupter) in-line adapter
or outlet to help avoid risk of electrical shock. The GFCI
should be placed as close to the outlet as possible.
6. Locate the On/Off switch on the base unit. Push the
ByoPlanet® MS-700™ sprayer to the “ON” position.
A light will illuminate on the sprayer instrument panel.
7. Remove the sprayer from the unit.
8. The system is now ready for use.
9. Priming the ByoPlanet® MS-700™ Electrostatic Sprayer:
Depress into an inconspicuous corner, container or drain.
Spray the ByoPlanet® MS-700™ Electrostatic Sprayer for
up to 20 seconds to generate a steady ow of solution.
10. When spraying, a second indicator light will illuminate on
the sprayer instrument panel when the sprayer button is
depressed.
NOTE: Sprayer will automatically stay on until sprayer
button is depressed an additional time.
NOTE: Unit will not operate properly below 55°F
(12.5°C). If unit has been stored where temperatures are
below 55°F (12.5°C) move the unit to a warm environ-
ment and allow the unit to acclimate before operation.
Sprayer Operation
11. Position ByoPlanet® MS-700™ Electrostatic Sprayer in a
rear corner of the area.
12. Direct the spray wand at the desired surface.
13. Begin to spray. Press the sprayer button once to initiate
spraying. Press once to stop ow of the sprayer.
14. Follow a continuous path around the area, working from
high to low areas, moving the sprayer in a sweeping
motion until surfaces are thoroughly wet. Optimal spray
distance away from surface is 2–4 feet (0.6–1.2 meters).
15. After spraying, keep the area closed to the public until
applicable bystander re-entry times are reached (see
the product SDS for information on bystander re-entry
times). If no re-entry time is indicated, keep the area
closed until product contact times are reached or
surfaces are visibly dry.
16. Remove the closed sign from the door.
Changing ByoPlanet®-Approved Products
1. Stop spraying the ByoPlanet® MS-700™ Electrostatic
Sprayer.
2. Disconnect the bottle connection from the ByoPlanet®
-approved product that is to be changed and remove
from the sprayer. Cap the removed product if it is
being stored.
3. Purging the ByoPlanet® MS-700™ Electrostatic Sprayer:
Depress into an inconspicuous corner, container or drain.
Spray the ByoPlanet® MS-700™ Electrostatic Sprayer for
up to 20 seconds to purge the system.
4. Choose the appropriate ByoPlanet®-approved product
for cleaning, sanitizing or disinfecting.
5. Mount desired ByoPlanet®-approved product on
ByoPlanet® MS-700™ Electrostatic Sprayer base. Ensure
that the bottles are positioned with the opening facing
up and towards the dispensing tubes.
6. Unscrew the lid on the ByoPlanet®-approved product of
your choice, remove seal (if present), and connect the
ByoPlanet® MS-700™ Electrostatic Sprayer dispensing
cap to the bottle. Be sure the cap is screwed all the way
down; do not over-tighten.
7. Priming the ByoPlanet® MS-700™ Electrostatic Sprayer:
Depress into an inconspicuous corner, container or drain
Spray the ByoPlanet® MS-700™ Electrostatic Sprayer for
up to 20 seconds to generate a steady ow of solution.
After Use and Storage
1. Stop spraying the ByoPlanet® MS-700™ Electrostatic
Sprayer.
2. Disconnect the bottle connection from the ByoPlanet®
-approved product that is to be changed and remove
from the sprayer. Cap the removed product if it is
being stored.
3. Emptying drip cup holder (if necessary): Unscrew drip
cup, making sure to hold it level to prevent spillage.
Remove and empty the drip cup. Reinstall the empty drip
cup by rotating it in the opposite direction until it is snug.
4. Purging the ByoPlanet® MS-700™ Electrostatic Sprayer:
Depress into an inconspicuous corner, container or drain.
Spray the ByoPlanet® MS-700™ Electrostatic Sprayer
until no liquid comes out of the nozzle.
5. Turn off the unit. Indicator lights on the sprayer
instrument panel should no longer be illuminated
and power button should be in the OFF position.
6. Unplug the ByoPlanet® MS-700™ Electrostatic Sprayer
from wall.
7. Wrap cord on cord holder on the MS-700™ base unit.
8. Store in a safe, dry place.
OPERATING INSTRUCTIONS
8 | ENGLISH BYOPLANET.COM
In order for the ByoPlanet® MS-700™ Electrostatic Sprayer
to remain functional, the equipment should be cleaned on a
regular basis. In addition to general cleaning of the unit, one
user-serviceable area — the peristaltic pump — may need to
be serviced.
NOTE: As the sprayer becomes dirty from typical use, a
70% isopropyl alcohol cleaner that is manually applied is
recommended on outside surfaces.
The sprayer body has no serviceable parts inside. DO NOT
OPEN THE SPRAYER SHELL, AS DOING SO WILL VOID THE
WARRANTY ON THE SPRAYER. If you need to have your
sprayer serviced, contact Service Tech Team at
www.servicetechteam.com.
Exterior Frame
To clean the exterior of the ByoPlanet® MS-700™
Electrostatic Sprayer
1. Purge all chemistry from the device.
2. When not in use, ensure the device is powered off and
unplug the power cord from the wall outlet and device.
3. Wipe exterior surfaces of the device, including hose and
nozzle, with a slightly damp cloth or towel to remove
visible soil. Be sure that the cloth is well wrung out, and
excess moisture has been removed.
4. For additional soil removal, wipe the exterior surfaces
with a microber cloth that has been soaked in warm,
soapy water Be sure that the cloth is well wrung out, and
excess moisture has been removed.
5. Let device dry thoroughly before operation is resumed.
Peristaltic Pump
1. Disconnect the clear tubing inlet and outlet by twisting
the Tube Nuts counterclockwise until both tubes have
separated.
2. Rotate the Cover counterclockwise and pull the pump
assembly free from the unit.
3. Install the new Pump Assembly in the reverse order that
it was disassembled.
MAINTENANCE
ENGLISH | 9
BYOPLANET.COM
TROUBLESHOOTING
Volts ~115V
Running AMPS 6.0
Minimum Operating 55°F (12.5°C) Allow to acclimate
Temperature to room temperature if stored
below 55°F (12.5°C)
Frequency 60 Hz
Standard Hose Length 7 ft. (2.13 m)
Dimensions 25 3/8 in. (64 cm) H x 10 1/16 in.
(26 cm) W x 17 1/8 in. (43 cm) L
Air Line Pressure 35 psi (2.4 Bar)
Weight – Empty 43 lbs (20 kg)
Weight – Full 59 lbs (27 kg)
Shipping Weight 52 lbs (24 kg)
Flow Rate 110–130 mL/min
Potential Issue
Damage to nozzle
assembly
Damage to peristaltic
pump tubing
Dirty exterior sprayer
surfaces
Potential Issue
No power
System is not
switched on
Compressor shuts off
suddenly or won’t run
while depressing the
sprayer trigger
Compressor has
overheated
Unit stalls upon
initial spray
Corrective Action
Inspect for damage and faulty
parts. If present, contact
Service Tech Team.
Replace pump tubing. Visit
www.servicetechteam.com
to request replacement parts.
Clean exterior surfaces with
70% isopropyl alcohol.
Corrective Action
Verify the unit is plugged in and
on a known working power outlet
Depress power switch to illumi-
nate, or toggle power switch to
the ON position.
This is a sign that the unit’s circuit
breaker has tripped or the com-
pressor has overheated. The user
should look for physical objects
that could be loose or stuck in
the ventilation openings and
clear/ dislodge. Flip the power
switch back to the “ON” posi-
tion. If the problem persists, the
user should let the unit sit for 30
minutes to see if it’s an overheat-
ing issue. If the unit still refuses to
restart after 30 minutes, the user
should contact Service Tech Team.
Allow the unit to sit for a minimum
of 30 minutes with the power off.
If the air compressor does not
come up to speed when pressing
the trigger, this may be a sign
that the unit has been stored
below 55°F (12.5°C).
If unit has been stored where
temperatures are below 55°F
(12.5°C) move the unit to a warm
environment and allow the unit
to acclimate before operation.
EXCESSIVE NOZZLE DRIPPING
SYSTEM WILL NOT TURN ON
OR HAS SHUT OFF SUDDENLY
NOTE: DO NOT USE a chemical in the unit that is not a ByoPlanet
®
-
approved product. If you encounter the issues listed below,
use the suggested troubleshooting methods. If you encounter
an issue that is not addressed in this manual, contact Service
Tech Team at www.servicetechteam.com.
10 | ENGLISH BYOPLANET.COM
Volts ~240V
Running AMPS 3.0
Minimum Operating 55°F (12.5°C) Allow to acclimate
Temperature to room temperature if stored
below 55°F (12.5°C)
Frequency 50 Hz
Standard Hose Length 7 ft. (2.13 m)
Dimensions 25 3/8 in. (64 cm) H x 10 1/16 in.
(26 cm) W x 17 1/8 in. (43 cm) L
Air Line Pressure 35 psi (2.4 Bar)
Weight – Empty 43 lbs (20 kg)
Weight – Full 59 lbs (27 kg)
Shipping Weight 52 lbs (24 kg)
Flow Rate 110–130 mL/min
SPECIFICATIONS FOR 240V MODEL
SPECIFICATIONS FOR 115V MODEL
POTENTIAL ISSUE
Out of liquid solution
Blockage in the nozzle
or liquid tip
Spray appears weak
Damage to liquid hose
or peristaltic pump
tubing
No Liquid Flow
CORRECTIVE ACTION
Inspect product container for
solution level and replace if empty.
Power down and unplug the unit.
Visually inspect nozzle from
outside for blockages.
Note: Sprayer assembly, includ-
ing the nozzle, is non-service-
able. If there are problems with
obstructions in the sprayer or
nozzle assembly, please
contact Service Tech Team.
The user should power the unit
off, unplug from the wall and seek
out a different electrical outlet
to try. If unavailable, they should
look to see if other devices are
running on the same electrical
circuit. Power those off if neces-
sary. This could be a result of an
underrated extension cord. If an
extension cord is being used,
remove and test the unit while
using only the connected power
cord. See the extension cord
section for more information.
Inspect the liquid line for kinks
and/or damage. Visit
www.servicetechteam.com
to request replacement parts.
If unit has been stored without
use for extended period of time,
peristaltic pump may not operate
properly upon startup. The user
should run the unit for 5 minutes
prior to use.
POTENTIAL ISSUE
Damage to the
air hose
Blockage in the nozzle
Compressor not
starting properly.
CORRECTIVE ACTION
Inspect hose for knicks, damage
or areas where air is escaping.
Power down and unplug unit.
Visually inspect nozzle from out-
side for blockages. Note: Sprayer
assembly, including the nozzle,
is non-serviceable. If there are
problems with obstructions in
the sprayer or nozzle assembly,
please contact Service Tech Team.
If the air compressor does not
come up to speed when pressing
the trigger, this may be a sign
that the unit has been stored
below 55°F (12.5°C)
If unit has been stored where
temperatures are below 55°F
(12.5°C) move the unit to a warm
environment and allow the unit
to acclimate before operation.
AIR PRESSURE SEEMS LOW OR WEAK
EQUIPMENT WARRANTY
THE BYOPLANET® MS-700™ ELECTROSTATIC SPRAYER
COMES WITH A ONE-YEAR LIMITED WARRANTY. PLEASE
REFER TO THE MANUFACTURER’S WARRANTY POLICY
FOUND AT WWW.SERVICETECHTEAM.COM.
ENGLISH | 11
BYOPLANET.COM
NO SPRAY, ERRATIC SPRAY
OR WEAK SPRAY
TO PURCHASE
A BYOPLANET
ELEC TROSTATI C
SPRAY SYSTEM
BYOPLANET.COM/SALES
1-855-211-1518
FOR CUSTOMER
COLLATERAL, INCLUDING
OPERATOR’S MANUAL
AND QUICK START GUIDES
SERVICETECHTEAM.COM
1-855-211-1518
QUESTIONS?
SERVICETECHTEAM.COM
CONTACT US
FOR DEVICE
WARRANTY
INFORMATION
SERVICETECHTEAM.COM
1-855-211-1518
MS-700 OPERATOR MANUAL ENGLISH - V6 - 11-29-2021
®
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
ByoPlanet MS-700 is a commercial-grade electrostatic sprayer designed for both indoor and outdoor use. It utilizes electrostatic charge to improve spray coverage and reduce product waste. Ideal for sanitizing large areas, the MS-700 can be used with ByoPlanet-approved disinfectants and cleaning solutions.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
in other languages
Related papers
Other documents
-
Clorox Total 360 User manual
-
Ryobi P2880 Owner's manual
-
-
Ryobi P2807BTL Owner's manual
-
Smith Performance Sprayers S3E-V User manual
-
Titan 740IX Owner's manual
-
ESS BP2 Owner's manual
-
Orbit NEX-ES BP360UV User manual
-
-
Mountain Man ESS MBP 4.0 Owner's manual
