Ningbo HJ4366-7J User manual

Type
User manual

Ningbo HJ4366-7J is a versatile wireless remote control device that offers multiple functions and can be used in various applications. With its compact size and lightweight design, it's easy to handle and carry. The device operates on a DC3V battery and utilizes OOK modulation for signal transmission. It features three primary buttons: PLAY, +, and -, allowing users to control different aspects of the connected device. The PLAY button triggers a signal to start or stop an operation, while the + and - buttons send signals to increase or decrease speed or volume.

Ningbo HJ4366-7J is a versatile wireless remote control device that offers multiple functions and can be used in various applications. With its compact size and lightweight design, it's easy to handle and carry. The device operates on a DC3V battery and utilizes OOK modulation for signal transmission. It features three primary buttons: PLAY, +, and -, allowing users to control different aspects of the connected device. The PLAY button triggers a signal to start or stop an operation, while the + and - buttons send signals to increase or decrease speed or volume.

433M remote control instruction manual
Pictures of objects:
Parameters:
Product Model: HJ4366-7J
Operating voltage: DC3V (one 2032 button battery)
Operating current: less than 20MA when transmitting
Operating frequency: 433.92MHZ
Modulation mode: OOK
Standby current: less than 5UA
Size: 98*40.5*11mm
Product quality: 24.5g
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation
Instructions for operation:
1: Press the PLAY button, send signal, open the machine, release to stop
sending.
2: Press the+key, send signal,speed+, release to stop sending.
3:Press the-key, send signal,speed-, release to stop sending.
Application production scene:
1: The treadmill remote control
2: remote control toys.
3: Smart furniture. , etc.
4:Wireless remote control
Warning:
This device has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This device generates, uses and
can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this device does cause harmful interference to radio or television
reception, which can be determined by turning the device off and on, the user
is encouraged to try to correct the interference by one or more of the following
measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the device and receiver.
--Connect the device into an outlet on a circuit different from that to which the
receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment
RF Exposure Information
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
  • Page 1 1
  • Page 2 2
  • Page 3 3

Ningbo HJ4366-7J User manual

Type
User manual

Ningbo HJ4366-7J is a versatile wireless remote control device that offers multiple functions and can be used in various applications. With its compact size and lightweight design, it's easy to handle and carry. The device operates on a DC3V battery and utilizes OOK modulation for signal transmission. It features three primary buttons: PLAY, +, and -, allowing users to control different aspects of the connected device. The PLAY button triggers a signal to start or stop an operation, while the + and - buttons send signals to increase or decrease speed or volume.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI