Global Sources GL-TLM030W User manual

Brand: Global Sources

Model: GL-TLM030W

Type: User manual

The Global Sources GL-TLM030W is a versatile LED floor lamp with wireless charging capabilities. It includes a 5W LED bulb, providing energy-efficient lighting. The wireless charging area allows you to conveniently power up compatible devices by simply placing them on the designated spot.

Shade Assembly:

1.Unscrew the socket fastener (C) from the socket arm (B)

2.Place the glass shade onto the socket, and while holding the shade in place,

screw the socket fastener back onto the socket arm until tight and the glass

shade is securely fastened into place.

Wireless Charging:

Please make sure your wirelessly chargeable phone is placed at the center of the wireless

charging area, and that it is connected. Phones with metal inside do not support a wireless

charge. If your phone does not charge wirelessly, standard USB charging may be used.



BULB TYPE: 

Includes 1x A19 5W LED bulb.



GENERAL PRODUCT INFORMATION:



.



Extend Your Warranty To Five Years Free 

If you would like to extend your warranty from three years to a total of five, free, register

your purchase using the brief form on our. site:brightech.com/pages/extended-warranty .

GENERAL PRODUCT INFORMATION 

This product is suitable for dry locations only.

IMPORTANT SAFETY INSTRUCTIONS:

AS A SAFETY FEATURE TO REDUCE THE RISK OF ELECTRIC SHOCK, THIS LAMP

HAS A POLARIZED PLUG. THIS MEANS ONE PRONG IS LARGER THAN THE OTHER.

THEREFORE, THE PLUG WILL ONLY FIT IN A POLARIZED OUTLET IN ONE WAY. IF

THE PLUG DOES NOT FIT FULLY IN THE OUTLET, TAKE IT OUT AND TURN THE

PLUG OVER TO INSERT THE PRONGS IN THE OPPOSITE WAY. IF IT STILL DOES

NOT GO IN, CONTACT A QUALIFIED ELECTRICIAN. NEVER USE WITH AN

EXTENSION CORD UNLESS THE PLUG CAN BE FULLY INSERTED. DO NOT ALTER

THE PLUG.

Glass

Shade

Socket

arm B

Socket

Fastener C

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not

cause harmful interference, and (2) this device must accept any interference received, including interference that may cause

undesired operation

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of

the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance

with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help.

Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user's

authority to operate the equipment

Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Global Sources GL-TLM030W User manual

Global Sources GL-TLM030W User manual

Global Sources GL-TLM030W User manual

Other documents