2. SelectBlinds
  3. Sheer
Sheer

SelectBlinds Sheer Installation guide

  • Hello! I've reviewed the Installation Guide for Sheer Vertical Shades. This document details bracket fitting methods including top and face fixing. It also describes how to connect the fabric louvers and how to hang the assembled shade. I am ready to answer any questions you might have about the installation process.
  • What are the two methods for fitting the brackets?
    Where are the brackets screwed for Top-Fixing?
    Where are the brackets screwed for Face-Fixing?
    How do you attach the fabric to the hangers?
    How do you hang the fabric on the headrail?
Installation Guide
Sheer Vertical Shades
The brackets offer two methods of
installation:
Top-Fixing
Where the brackets
are screwed into the
lintel (or ‘ceiling’ of the
recess)
Face-Fixing
Where the brackets are
screwed onto a facing
surface (a wall or window
frame)
Rest the front lip
of the headrail in
the front lip of
the bracket.
Then twist the back
of the headrail
upwards until it
snaps into place in
the rear hook of the
bracket.
Fitting the track
Fitting the brackets
Installation Guide
Sheer Vertical Shades
Take the louvres and fold each into a ‘C’ shape.
Connect each louvre to the next using the clip
hangers, as shown. Once all the louvres are
connected together, add a clip to the loose end of
the outermost louvres.
Hanging the fabric
Twist the control wand to turn the hooks so
that their ‘open’ part is facing into the room.
Take the connected louvres and click the hangers into the
hooks on the headrail, working along from one end to the
other.
Attaching the fabric to the hangers
Installation Guide
Sheer Vertical Shades
The brackets offer two methods of
installation:
Top-Fixing
Where the brackets
are screwed into the
lintel (or ‘ceiling’ of the
recess)
Face-Fixing
Where the brackets are
screwed onto a facing
surface (a wall or window
frame)
Rest the foremost of the lips on the headrail
in the front lip of the bracket.
Then twist the back of the headrail upwards until it
snaps into place in the rear hook of the bracket.
Fitting the track
Fitting the brackets
Installation Guide
Sheer Vertical Shades
Take the louvres and fold each into a ‘C’ shape.
Connect each louvre to the next using the clip
hangers, as shown. Once all the louvres are
connected together, add a clip to the loose end
of the outermost louvres.
Hanging the fabric
Twist the control wand to turn the hooks
so that their ‘open’ part is facing into the
room.
Take the connected louvres and click the hangers into
the hooks on the headrail, working along from one end
to the other.
Attaching the fabric to the hangers
/