U-Boat U-BOAT Classic 42mm Tungsteno Beige User manual

U-BOAT Classic 42mm Tungsteno Beige
Brand
U-Boat
Model
U-BOAT Classic 42mm Tungsteno Beige
Type
User manual

This manual is also suitable for

U-Boat U-BOAT Classic 42mm Tungsteno Beige is an automatic mechanical watch with a 24 hour indicator, date display, and adjustable time and date. The watch is water-resistant and suitable for water use and activities, although it should be rinsed with fresh water after contact with seawater. It requires manual winding after long periods of inactivity. For optimal performance, it's recommended to take the watch to an Authorized Retailer/Service Centre every 3-4 years for check-ups and maintenance.

U-Boat U-BOAT Classic 42mm Tungsteno Beige is an automatic mechanical watch with a 24 hour indicator, date display, and adjustable time and date. The watch is water-resistant and suitable for water use and activities, although it should be rinsed with fresh water after contact with seawater. It requires manual winding after long periods of inactivity. For optimal performance, it's recommended to take the watch to an Authorized Retailer/Service Centre every 3-4 years for check-ups and maintenance.

CLASSICO
SOLOTEMPO
WE CONGRATULATE YOU ON THE PURCHASE OF THIS U-BOAT WATCH.
IN THIS BOOKLET YOU WILL FIND THE INSTRUCTIONS FOR USE.
WE KINDLY INVITE YOU TO REGISTER YOUR WATCH ON OUR OFFICIAL
WEB SITE IN THE U-CLUB AREA, DEDICATED EXCLUSIVELY TO THE
U-BOAT WATCHES OWNERS AND GAIN ACCESS TO FURTHER BENEFITS
AND PREVIEWS ON OUR LATEST NEWS, EVENTS AND OFFERS.
Dear Customer
Representative image.
Some components may be in different positions or not fitted.
WATCH INSTRUCTIONS
Automatic Mechanical
AUTOMATIC MECHANICAL • CLASSICO
I
7
● CAP CROWN
● CROWN
● HOUR HAND
● MINUTE HAND
● SECOND HAND
● 24 HOUR INDICATOR
● DATE
C
B
A
D
E
F
G
●
C
●
B
●
A
●
D
●
E
●
F
●
G
INSTRUCTIONS FOR USE
8
I
CLASSICO • AUTOMATIC MECHANICAL AUTOMATIC MECHANICAL • CLASSICO
I
9
1. Unscrew the cap crown ●
A to gain access to the crown ●
C.
POSITION 1
NEUTRAL POSITION
to wind and start the watch by turning the crown ●
C clockwise.
POSITION 2
FIRST CLICK
pull out crown ●
B and turn to adjust date.
POSITION 3
SECOND CLICK
pull out crown ●
B and turn to adjust time.
2. Fully depress the crown ●
B to move it back into the neutral position. Carefully
screw in the cap crown ●
A until firmly in place.
• POSITION 1
NEUTRAL POSITION
• POSITION 2
FIRST CLICK
• POSITION 3
SECOND CLICK
●
B
●
B
●
A
●
G●
F●
A
●
G●
F
POS. 2
POS. 3
POS. 1
AUTOMATIC MECHANICAL • CLASSICO
I
11
• The precision mechanism in your watch will provide long-lasting performance
when properly cared for.
• We recommend taking your watch to an Authorised Retailer/Authorised Service
Centre every 3-4 years for a check-up and to perform ordinary maintenance on
all mechanical parts and restore of water-resistance.
• We also advise taking your watch to an Authorised Retailer/Authorised Service
Centre to change the strap.
• Avoid leaving your watch where it is exposed to large temperature variations,
humidity, the sun and strong magnetic fields.
• Make sure the watch is in adequate conditions for water use/activities.
• Remember to rinse the watch after it comes into contact with seawater.
AUTOMATIC WATCHES REQUIRE MANUAL WINDING FOLLOWING A LONG PERIOD
OF INACTIVITY.
CARE AND MAINTENANCE
U-BOAT HEAD OFFICE
Via Pesciatina 751H
Gragnano, Capannori - 55010 Lucca - Italy
Tel: +39 0583 469288 - Fax: +39 0583 462249
www.uboatwatch.com - [email protected]
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7

U-Boat U-BOAT Classic 42mm Tungsteno Beige User manual

U-BOAT Classic 42mm Tungsteno Beige
Brand
U-Boat
Model
U-BOAT Classic 42mm Tungsteno Beige
Type
User manual
This manual is also suitable for

U-Boat U-BOAT Classic 42mm Tungsteno Beige is an automatic mechanical watch with a 24 hour indicator, date display, and adjustable time and date. The watch is water-resistant and suitable for water use and activities, although it should be rinsed with fresh water after contact with seawater. It requires manual winding after long periods of inactivity. For optimal performance, it's recommended to take the watch to an Authorized Retailer/Service Centre every 3-4 years for check-ups and maintenance.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents