INSTRUCTIONS FOR USE
8
I
CLASSICO 1001 • MECHANICAL AUTOMATIC MECHANICAL AUTOMATIC • CLASSICO 1001
I
9
1. Unscrew the cap crown ●
A to gain access to the crown ●
B.
POSITION 1
NEUTRAL POSITION
unscrew the crown ●
B to wind and start the watch.
POSITION 2
FIRST CLICK
carefully pull the crown ●
B right out to the first click. Turn the crown
●
B clockwise to set the date ●
F.
POSITION 3
SECOND CLICK
carefully pull the crown ●
B right out to the second click and turn the
crown ●
B to set the exact time.
2. Fully depress the crown ●
B to move it back into the neutral position and
gently screw ●
B it in. Screw in the cap crown ●
A until firmly in place.
• POSITION 1
NEUTRAL POSITION
• POSITION 2
FIRST CLICK
• POSITION 3
SECOND CLICK
POS. 2
POS. 3
POS. 1
●
B●
B
●
A
●
A
●
F
●
F
