Philips 105G78/05 User manual

2005-3-10

Safety and Troubleshooting Information

Safety Precautions and Maintenance • Troubleshooting • Regulatory

Information • Other Related Information

Safety precautions and maintenance

Read and follow these instructions when connecting and using your computer monitor:

z Disconnect the monitor from the power supply if the monitor is not to be used for an

extended period of time.

z Do not attempt to remove the back cover, as you will be exposed to a shock hazard. The

back cover should only be removed by qualified service personnel.

z Do not place objects on top of the monitor cabinet, objects could fall into vents or cover

them and prevent proper cooling of the monitor's electronic devices.

z To avoid the risk of shock or permanent damage to the set, do not expose the monitor to

rain or excessive moisture.

z Do not use alcohol or ammonia-based liquid to clean the monitor. If necessary, clean with

a slightly damp cloth. Disconnect the monitor from the power supply before cleaning.

z When positioning the monitor, make sure the power plug and outlet are easily accessible.

Consult a service technician if the monitor does not operate normally when operating instructions

of this manual are followed.

RETURN TO TOP OF THE PAGE

WARNING: Use of controls, adjustments, or procedures other

than those specified in this documentation may result in

exposure to shock, electrical hazards, and/or mechanical

hazards.

Troubleshooting

Safety Precautions and Maintenance • Troubleshooting • Regulatory

Information • Other Related Information

Common Problems

Having trouble? Something not working? Before calling for help, try these suggestions.

Having this

problem?

Check these items

No Picture

(Power LED not lit)

z Make sure the Power cable is plugged into the power

outlet and back of the monitor.

z Power button on the front of your monitor should be in the

ON position.

No Picture

(Power LED is flashing

orange)

z Make sure the computer is turned on.

z Make sure the monitor cable is properly connected to your

computer.

z Check to see if the monitor cable has bent pins.

z The Energy Saving feature may be activated

No Picture

(Power LED is orange)

z Make sure the Brightness and Contrast controls are set

correctly.

z Make sure the monitor cable is properly connected to your

computer.

z Check to see if the monitor cable has bent pins.

Screen doesn't show

when you turn on the

monitor

z Make sure the monitor cable is properly connected to your

computer. (Also refer to the Quick Start Guide).

z Check to see if the monitor cable has bent pins.

z Make sure the computer is turned on.

No color or intermittent

color

z If you are using a non-VESA-DDC standard video card,

turn the DDC1 / 2B feature Off.

Color appears blotchy

z The picture may need degaussing.

z Remove any nearby magnetic objects.

z Face the monitor toward the East for the best picture

quality.

Missing one or more

colors

z Check the Color Temperature.

z Make sure the monitor cable is properly connected to your

computer.

z Check to see if the monitor cable has bent pins.

Dim Picture

z Adjust the Brightness and Contrast controls.

z Check your video card and it's owner's manual

instructions for it may be a non-VESA-DDC Standard

card.

Picture is too large or

too small.

z Adjust the Horizontal and/or Vertical Size.

Edges of the picture

are not square.

z Adjust the geometry.

For further assistance, refer to the Consumer Information Centers list to contact your local Philips

distributor.

RETURN TO TOP OF THE PAGE

Picture has a double

image.

z Eliminate the use of a video extension cable and/or video

switch box.

z Face the monitor toward the East for the best picture

quality.

Picture is not sharp.

z heck to make sure Moire Function is switched off.

Unstable Picture

z Increase your refresh rate.

Problem with On

Screen Display

z Refer to the instructions and troubleshooting information

in that chapter.

Regulatory Information

CE Declaration of Conformity• Federal Communications Commission (FCC)

Notice (U.S. Only) • Commission Federale de la Communication (FCC

Declaration) • North Europe Information (Nordic Countries) • BSMI Notice

(Taiwan Only) • Ergonomie Hinweis (nur Deutschland)

Safety Precautions and Maintenance • Troubleshooting • Other Related

Information

CE Declaration of Conformity

z Philips Consumer Electronics declare under our responsibility that the product is in

conformity with the following standards

- EN60950:2000 (Safety requirement of Information Technology Equipment)

- EN55022:1998 (Radio Disturbance requirement of Information Technology Equipment)

- EN55024:1998 (Immunity requirement of Information Technology Equipment)

- EN61000-3-2:2000 (Limits for Harmonic Current Emission)

- EN61000-3-3:1995 (Limitation of Voltage Fluctuation and Flicker)

following provisions of directives applicable

- 73/23/EEC (Low Voltage Directive)

- 89/336/EEC (EMC Directive)

- 93/68/EEC (Amendment of EMC and Low Voltage Directive)

and is produced by a manufacturing organization on ISO9000 level.

z The product also comply with the following standards

- ISO9241-3, ISO9241-7, ISO9241-8 (Ergonomic requirement for Visual Display)

- ISO13406-2 (Ergonomic requirement for Flat panels)

- GS EK1-2000 (GS specification)

- prEN50279:1998 (Low Frequency Electric and Magnetic fields for Visual Display)

-

MPR-II (MPR:1990:8/1990:10 Low Frequency Electric and Magnetic fields)

- TCO99, TCO03 (Requirement for Environment Labelling of Ergonomics, Energy,

Ecology and Emission,

TCO: Swedish Confederation of Professional Employees) for TCO versions

RETURN TO TOP OF THE PAGE

Federal Communications Commission (FCC) Notice (U.S. Only)

z Reorient or relocate the receiving antenna.

z Increase the separation between the equipment and receiver.

z Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

z Consult the dealer or an experienced radio/TV technician for help.

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is encouraged to

try to correct the interference by one or more of the following measures:

Use only RF shielded cable that was supplied with the monitor when connecting this monitor to a

computer device.

To prevent damage which may result in fire or shock hazard, do not expose this appliance to rain

or excessive moisture.

THIS CLASS B DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN

INTERFERENCE-CAUSING EQUIPMENT REGULATIONS.

RETURN TO TOP OF THE PAGE

Commission Federale de la Communication (FCC Declaration)

z Réorienter ou déplacer l'antenne de réception.

z Augmenter la distance entre l'équipement et le récepteur.

z Brancher l'équipement sur un autre circuit que celui utilisé par le récepteur.

z Demander l'aide du marchand ou d'un technicien chevronné en radio/télévision.

N'utiliser que des câbles RF armés pour les connections avec des ordinateurs ou périphériques.

CET APPAREIL NUMERIQUE DE LA CLASSE B RESPECTE TOUTES LES EXIGENCES DU

REGLEMENT SUR LE MATERIEL BROUILLEUR DU CANADA.

RETURN TO TOP OF THE PAGE

North Europe Information (Nordic Countries)

Changes or modifications not expressly approved by the party responsible for

compliance could void the user's authority to operate the equipment.

Cet équipement a été testé et déclaré conforme auxlimites des appareils

numériques de class B,aux termes de l'article 15 Des règles de la FCC. Ces

limites sont conçues de façon à fourir une protection raisonnable contre les

interférences nuisibles dans le cadre d'une installation résidentielle. CET appareil

produit, utilise et peut émettre des hyperfréquences qui, si l'appareil n'est pas

installé et utilisé selon les consignes données, peuvent causer des interférences

nuisibles aux communications radio. Cependant, rien ne peut garantir l'absence

d'interférences dans le cadre d'une installation particulière. Si cet appareil est la

cause d'interférences nuisibles pour la réception des signaux de radio ou de

télévision, ce qui peut être décelé en fermant l'équipement, puis en le remettant

en fonction, l'utilisateur pourrait essayer de corriger la situation en prenant les

mesures suivantes:

Toutes modifications n'ayant pas reçu l'approbation des services compétents en

matière de conformité est susceptible d'interdire à l'utilisateur l'usage du présent

équipement.

Placering/Ventilation

RETURN TO TOP OF THE PAGE

BSMI Notice (Taiwan Only)

RETURN TO TOP OF THE PAGE

Ergonomie Hinweis (nur Deutschland)

Der von uns gelieferte Farbmonitor entspricht den in der "Verordnung über den Schutz vor

Schäden durch Röntgenstrahlen" festgelegten Vorschriften.

Auf der Rückwand des Gerätes befindet sich ein Aufkleber, der auf die Unbedenklichkeit der

Inbetriebnahme hinweist, da die Vorschriften über die Bauart von Störstrahlern nach Anlage III ¤

5 Abs. 4 der Röntgenverordnung erfüllt sind.

Damit Ihr Monitor immer den in der Zulassung geforderten Werten entspricht, ist darauf zu

achten, daß

1.

Reparaturen nur durch Fachpersonal durchgeführt werden.

VARNING:

FÖRSÄKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG ÄR

LÄTÅTKOMLIGA, NÄR DU STÄLLER DIN UTRUSTNING PÅPLATS.

Placering/Ventilation

ADVARSEL:

SØRG VED PLACERINGEN FOR, AT NETLEDNINGENS STIK OG

STIKKONTAKT ER NEMT TILGÆNGELIGE.

Paikka/Ilmankierto

VAROITUS:

SIJOITA LAITE SITEN, ETTÄ VERKKOJOHTO VOIDAAN TARVITTAESSA

HELPOSTI IRROTTAA PISTORASIASTA.

Plassering/Ventilasjon

ADVARSEL:

NÅR DETTE UTSTYRET PLASSERES, MÅ DU PASSE PÅ

A

T

KONTAKTENE FOR STØMTILFØRSEL ER LETTE Å NÅ.

2.

nur original-Ersatzteile verwendet werden.

3.

bei Ersatz der Bildröhre nur eine bauartgleiche eingebaut wird.

RETURN TO TOP OF THE PAGE

Aus ergonomischen Gründen wird empfohlen, die Grundfarben Blau und Rot nicht auf

dunklem Untergrund zu verwenden (schlechte Lesbarkeit und erhöhte Augenbelastung bei

zu geringem Zeichenkontrast wären die Folge).

Der arbeitsplatzbezogene Schalldruckpegel nach DIN 45 635 beträgt 70dB (A) oder weniger.

ACHTUNG:

BEIM AUFSTELLEN DIESES GERÄTES DARAUF ACHTEN, DAß

NETZSTECKER UND NETZKABELANSCHLUß LEICHT ZUGÄNGLICH SIND.

Other Related Information

Safety Precautions and Maintenance • Troubleshooting • Regulatory

Information •Information for Users in the U. S. • Information for Users Outside

the U.S

Information for Users in the U. S.

For units set at 115 V :

Use a UL Listed Cord Set consisting of a minimum 18 AWG, Type SVT or SJT three conductor

cord a maximum of 15-feet long and a parallel blade, grounding type attachment plug rated 15 A,

125 V.

For units set at 230 V:

Use a UL Listed Cord Set consisting of a minimum 18 AWG, Type SVT or SJT three conductor

cord a maximum of 15-feet long and a tandem blade, grounding type attachment plug rated 15 A,

250 V.

Information for Users outside the U.S.

For units set at 230 V:

Use a Cord Set rated minimum 5 A, 250 V ( for units set at 230V ) or 10A, 125V (for units set at

115V). The Cord Set should have the appropriate safety approvals for the country in which the

equipment will be installed.

RETURN TO TOP OF THE PAGE

About This Electronic User's Manual

About This Guide • Other Documents You May Need • Notational Descriptions

About This Guide

This electronic user's guide is intended for anyone who uses the Philips Color Monitor. It

describes the monitor's features, setup, operation and all other information, which is the same

exact information described in our printed version.

The sections are as follows:

z Safety and Troubleshooting Information provides tips and solutions for common problems,

and other related information you may need.

z About This Electronic User's Manual gives overview of what information are included as

well as notation icon descriptions and other documentation you can refer to.

z Product Information gives an overview of the monitor's features and as well as the

technical specifications for this monitor.

z Installing Your Monitor describes the initial setup process and gives an overview of how to

use the monitor.

z On Screen Display provides information on adjusting the settings on your monitor.

z Customer Care and Warranty is a list of worldwide Philips consumer information centers

along with the help desk phone numbers and information on the applicable warranty of

your product..

z Glossary provides more information for technical terms.

z Download allows users to install the entire manual on their hard drive.

z Frequently Asked Questions

provides answers to commonly asked questions.

RETURN TO TOP OF THE PAGE

Other Documents You May Need

In addition to this

Electronic User's Guide

, you may need to refer to the following documentation:

z

Philips Color Monitor Quick Start Guide

which summarizes the steps for setting up the

monitor. This is included with this product.

RETURN TO TOP OF THE PAGE

Notational Descriptions

The following subsections describe notational conventions used in this document.

Notes, Cautions, and Warnings

Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or

in italic type. These blocks are notes, cautions, and warnings, and they are used as follows:

Some warnings may appear in alternate formats and may be unaccompanied by an icon. In such

cases, the specific presentation of the warning is mandated by regulatory authority.

RETURN TO TOP OF THE PAGE

broadcasting in whole or in part is prohibited without written consent of Philips Electronics N.V.

NOTE: This icon indicates important information and tips that help you make

better use of your computer system.

CAUTION: This icon indicates information that tells you how to avoid either

potential damage to hardware or loss of data.

WARNING: This icon indicates the potential for bodily harm and tells you

how to avoid the problem.

SMART HELP: This icon indicates helpful information when adjusting the On

Screen Display of your monitor.

Product Information

Product Features • Lead-free product • Technical Specifications • Automatic

Power Saving • Physical Specification • Pin Assignment • Product Views

Product Features

105G7

z 15-inch (14.0" VIS) color monitor with excellent front of screen performance for use with

MACs and PCs

z Autoscan covers horizontal frequencies up to 54 kHz offering a maximum resolution of

1024 x 768 with flicker free display of 800 x 600 at up to 85 Hz

z Flat square High Contrast CRT with high-resolution 0.28 mm dot pitch .

RETURN TO TOP OF THE PAGE

Lead-free product

Philips eliminated toxic substances like lead from its displays. Lead-free display helps protect your

health and promotes environmentally sound recovery and disposal of waste from electrical and

electronic equipment. Philips complies with the European Community stringent RoHS Directive

mandating restrictions on hazardous substances in electrical and electronic equipment. With

Philips, you can be confident that your display device does not harm the environment.

Technical Specifications*

Model Color

105G78 Black

105G79

Gray

CRT

• Size and deflection 15 inch / 38 cm ; 90° deflection angle

• Dot pitch 0.28 mm

• Tube type 29mm neck, glare screen

• Phosphor P22

SCANNING

• Horizontal scanning 30 - 54 KHz

• Vertical scanning 50 - 120 Hz

VIDEO

• Video dot rate 72 MHz

• Input impedance

- Video 75 ohm

105G7S

Silver/Black

* These information are subject to change without notice.

RETURN TO TOP OF THE PAGE

Automatic Power Saving

If you have VESA's DPMS compliance display card or software installed in your PC, the monitor

can automatically reduce its power consumption when not in use. And if an input from a keyboard,

mouse or other input device is detected, the monitor will automatically "wake up". The following

table shows the power consumption and signaling of this automatic power saving features:

RETURN TO TOP OF THE PAGE

Physical Specifications

* These information are subject to change without notice.

- Sync 4.7k ohm

• Input signal levels 0.7 Vpp

• Sync input signal

TTL Sync

• Sync polarities Positive and negative

WHITE COLOR TEMPERATURE

Chromaticity CIE coordinates:

• at 9300 K x = 0.283 / y = 0.297

• at 6500 K x = 0.313 / y = 0.329

Power Management Definition

VESA's Mode

Video

H-sync V-sync

Power Used Power Saving (%) LED color

ON

Active

Yes

Typical 62W

0 %

Green

OFF

Blanked

No

<5W

92%

orange

• Dimensions

14.2" x 14.3" x 15.3" / 360 x 362 x 387 mm (including base)

14.2" x 12.7" x 15.3" / 360 x 321 x 387 mm (excluding base)

• Weight 11.5kg

• Power supply

90 - 264 VAC, 60-50Hz

(Please refer to rating label)

• Temperature (operating) 0° to 40°C / 32° to 104°F

• Temperature (storage) -25° to +65°C / -13° to +149°F

• Relative humidity(storage) 5% to 95%

RETURN TO TOP OF THE PAGE

Pin Assignment

The 15-pin D-sub connector (male) of the signal cable (IBM systems):

RETURN TO TOP OF THE PAGE

Views

Follow the links to see various views of the monitor and its components.

Front View

Rear View

RETURN TO TOP OF THE PAGE

No.

Assignment

No.

Assignment

1

Red video input

9

NC

2

Green video input

10

Ground

3

Blue video input

11

Monitor Ground

4

Ground

12

DDC-Serial Data

5

Ground

13

H. Sync

6

Red video ground

14

V- Sync/ * VCLK

7

Green video ground

15

DDC-Serial clock

8

Blue video ground

*

For DDC

Installing your Monitor

Front View • Rear View

Front View

RETURN TO TOP OF THE PAGE

Rear View

1 Power Switch

2 Power Indicator

3 Menu

4 Contrast

5 Brightness

6 Exit

1.

Power in - attach power cable here.

2.

Video In - this is a cable which is already attached to your monitor. Connect

the other end of the cable to your PC.

RETURN TO TOP OF THE PAGE

The OSD Controls

Brightness:

Brightness is the overall intensity of the light coming from the screen. A 50%

brightness is recommended. To adjust your screen's brightness, follow the steps

below.

RETURN TO TOP OF THE PAGE

Contrast:

Contrast is the difference between the light and dark areas on the screen. A 100%

contrast is recommended. To adjust your screen's contrast, follow the steps below.

RETURN TO TOP OF THE PAGE

How to Adjust a Setting

1. Press the Menu Key to make the OSD window appear.

2. Press the Up or Down Key to select the desired function.

With the menu off, press , then press

to decrease brightness

to increase brightness

When the brightness is adjusted to the level desired,

press the Exit Key.

The BRIGHTNESS menu will disappear with the new

adjustment saved.

With the menu off, press then press

to decrease contrast

to increase contrast

When the contrast is adjusted to the level desired,

press the Exit Key.

The CONTRAST window will disappear with the new

adjustment saved.

3. Press the Menu Key again to select the function that you want to adjust.

4. Press the Up or Down Key to change the settings of the current function.

5. When the OSD window is active, it shows the input signal timing. The "H" stands for

the horizontal frequency and "V" for the vertical frequency.

6. To exit and save, either press the Exit Key, or leave the monitor alone for 10

seconds. If you want to adjust any other function, repeat steps 2-4.

Adjusting the Picture

Icon Adjustment

Contrast

Adjusts the contrast between the foreground and

background of the screen image.

Brightness

Adjusts the background brightness of the screen

image.

Horizontal

position

Moves the screen image to the right or left.

Horizontal size

Adjusts screen width.

Vertical position

Moves screen image up or down.

Vertical size

Adjusts screen height.

ZOOM

Adjust the picture's horizontal and vertical size

simultaneously.

Pincushion

Straightens the left and right vertical edges of the

display.

Trapezoid

Adjusts the width of the top and bottom of the

screen.

Pin-Balance

Adjust to compensate the pincushion unbalance.

Parallelogram

Adjusts the viewing area when it is tilted left or

right.

Rotation

Adjust the picture tilt to horizontal position.

RETURN TO TOP OF THE PAGE

6500°K/9300°K

(Color

Temperature)

The color temperature for 6500°K is x=0.313,

y=0.329 and 9300°K is x=0.283, y=0.297. It

presents two different color sets on the screen.

You can select 9300°K or 6500°K by pressing the

Shuttle Knob .

User Color

(Red/Blue)

If the 9300°K normal white or 6500°K warmer

white do not satisfy your desire, properly adjust

R.B GAIN controls to obtain your optimum

whiteness level.

Degauss

If color impurity occurs when moving or swiveling

the monitor, press the Shuttle Knob and degauss

to fix the picture condition.

Moiré Reduce

Moiré is the result of interference between the

phosphor layout and the video signal. In some

cases, you may find the moiré very noticeable.

Press the Shuttle Knob to enter in the moiré

reduce setting. Please adjust the level to the

optimum condition.

Note: Too high of a setting will cause the picture to

shake.

Recall

Press RECALL to restore the monitor to factory

settings.

Exit

Close OSD window.

SELECT

LANGUAGE

Select the language you like.

Customer Care & Warranty

PLEASE SELECT YOUR COUNTRY/AREA TO READ THE WARRANTY

COVERED:

PACIFIC: Australia • New Zealand

ASIA: Bangladesh • China • Hong Kong • India • Indonesia • Japan • Korea •

Malaysia • Pakistan • Philippines • Singapore • Taiwan • Thailand

AFRICA: Morocco

• South Africa

MIDDLE EAST: Dubai

• Egypt

Page is loading ...

Philips 105G78/05 User manual

This manual is also suitable for

Philips 105G78/05 User manual

Related papers

Other documents