Infiniti INFINITE QX 6 Owner's manual

FOREWORD

Your INFINITI represents a new way of thinking

about car design. It integrates advanced engineer-

ing and superior craftsmanship with a simple,

refined aesthetic sensitivity associated with tradi-

tional Japanese culture.

The result is a different notion of luxury and beauty.

The car itself is important, but so also is the sense

of harmony that the car evokes in its driver, and the

sense of satisfaction you feel with the INFINITI

—from the way it looks and drives to the high level

of dealer service.

To ensure that you enjoy your INFINITI to the

fullest, we encourage you to read this Owner’s

Manual immediately. It explains all of the features,

controls and performance characteristics of your

INFINITI; it also provides important instructions and

safety information.

A separate Warranty Information Booklet is to be

found in your Owner’s literature portfolio. Always

carry it with you when you take your INFINITI to an

authorized dealer. The portfolio contents provide

complete information about all warranties covering

this vehicle, the periodic maintenance required to

keep the warranties in effect as well as the INFINITI

Roadside Assistance program.

INFINITI is dedicated to providing a satisfying

ownership experience for as long as you own your

car. Should you have any questions regarding your

INFINITI or your INFINITI dealer, please contact our

Consumer Affairs department at 1-800-662-6200.

In Hawaii 1-808-836-0848 (Oahu number). In

Canada 1-800-363-4520. Thank you.

WHEN READING THE

MANUAL

This manual includes information for

all options available on this model.

Therefore, you may find some informa-

tion that does not apply to your vehicle.

All information, specifications and illustra-

tions in this manual are those in effect at the

time of printing. INFINITI reserves the right to

change specifications or design at any time

without notice.

MODIFICATION OF YOUR

VEHICLE

This vehicle should not be modified.

Modification could affect its perfor-

mance, safety or durability, and may

even violate governmental regula-

tions. In addition, damage or perfor-

mance problems resulting from

modification may not be covered

under INFINITI warranties.

READ FIRST — THEN DRIVE

SAFELY

Before driving your vehicle please read your

Owner’s Manual carefully. This will ensure

familiarity with controls and maintenance re-

quirements, assisting you in the safe opera-

tion of your vehicle.

WARNING

IMPORTANT SAFETY

INFORMATION

REMINDERS FOR SAFETY!

Follow these five important driving

rules to help ensure a safe and

comfortable trip for you and your

passengers!

Z 96.12.18/JR50-D X

● NEVER drive under the influence

of alcohol or drugs.

● ALWAYS observe posted speed

limits and never drive too fast for

conditions.

● ALWAYS use your seat belts and

appropriate child restraint sys-

tems.

● ALWAYS provide information

about the proper use of vehicle

safety features to all occupants of

the vehicle.

● ALWAYS review this Owner’s

Manual for important safety infor-

mation.

IMPORTANT INFORMATION

ABOUT THIS MANUAL

You will see various symbols in this manual.

They are used in the following ways:

WARNING

This is used to indicate the presence

of a hazard that could cause death or

serious personal injury. To avoid or

reduce the risk, the procedures must

be followed precisely.

CAUTION

This is used to indicate the presence

of a hazard that could cause minor or

moderate personal injury or damage

to your vehicle. To avoid or reduce

the risk, the procedures must be

followed carefully.

If you see this symbol, it means ‘‘Do not do

this’’ or ‘‘Do not let this happen’’.

SII0151

Z 96.12.20/ X

ON-PAVEMENT AND OFF-

ROAD DRIVING

This vehicle will handle and maneu-

ver differently from an ordinary pas-

senger car, because it has a higher

center of gravity for off-road use. As

with other vehicles with features of

this type, failure to operate this ve-

hicle correctly may result in loss of

control or an accident.

Be sure to read ‘‘On-Pavement and

Off-Road driving precautions’’ and

‘‘Avoiding collision and rollover’’ in

the ‘‘Starting and driving’’ section of

this manual.

TOKYO, JAPAN

reproduced or stored in a retrieval system, or transmitted

in any form, or by any means, electronic, mechanical,

photocopying, recording or otherwise, without the prior

written permission of Nissan Motor Co., Ltd.

Z 96.12.20/ X

TABLE OF CONTENTS

INSTRUMENTS AND CONTROLS .......................................................... 1-1

PRE-DRIVING CHECKS AND ADJUSTMENTS............................................ 2-1

HEATER, AIR CONDITIONER AND AUDIO SYSTEM .................................... 3-1

STARTING AND DRIVING................................................................... 4-1

IN CASE OF EMERGENCY .................................................................. 5-1

APPEARANCE AND CARE................................................................... 6-1

DO-IT-YOURSELF ............................................................................ 7-1

MAINTENANCE ............................................................................... 8-1

TECHNICAL AND CONSUMER INFORMATION........................................... 9-1

INDEX ........................................................................................ 10-1

Z 96.12.20/ X

1 INSTRUMENTS AND CONTROLS

Meters and gauges .................................... 1-3

Compass and outside temperature

display (If so equipped) .............................. 1-6

Warning/indicator light and buzzer .......... 1-10

Theft warning ............................................ 1-16

Windshield wiper and washer switch ...... 1-17

Rear window wiper and washer switch ... 1-18

Rear window and outside door mirror

defogger switch......................................... 1-19

Headlight and turn signal switch ............. 1-19

Front fog light switch................................ 1-21

Instrument brightness control ................. 1-21

Hazard warning flasher switch ................. 1-21

Heated seats (If so equipped)................... 1-22

Cigarette lighters and ashtrays ................ 1-23

Power socket............................................. 1-24

Coin tray .................................................... 1-25

Cup holder ............................................... 1-25

Glasses case.............................................. 1-26

Console box............................................... 1-27

Luggage board and box ............................ 1-28

Tonneau cover........................................... 1-29

Power window ......................................... 1-29

Sunroof (If so equipped)........................... 1-31

Clock ........................................................ 1-32

Interior light ............................................. 1-34

Vanity mirror lights .................................. 1-34

Personal light ............................................ 1-35

Integrated HomeLink

®

transmitter (If so equipped)...................... 1-35

Z 96.12.20/ X

SII0106

INSTRUMENTS AND CONTROLS

1-2

Z 96.12.20/ X

METERS AND GAUGES

0

1

2

3

4

5

6

7

8

10

20

0

40

60

80

100

120

140

160

180

20

30

40

50

60

70

80

90

100

110

120

E

F

MPH

C

H

4LO

O/D

OFF

SII0156

INSTRUMENTS AND CONTROLS

1-3

Z 96.12.20/ X

SPEEDOMETER

The speedometer indicates vehicle speed.

ODOMETER

The odometer records the total mileage the

vehicle has been driven.

TRIP ODOMETER

The trip odometer records the distance of

individual trips. Before each trip, set the trip

odometer to zero by pushing the RESET

button.

TACHOMETER

The tachometer indicates engine speed in

revolutions per minute (r/min).

CAUTION

When engine speed approaches the

red zone, shift to a higher gear.

Operating the engine in the red zone

may cause serious engine damage.

SII0108

SII0109

INSTRUMENTS AND CONTROLS

1-4

Z 96.12.20/ X

ENGINE COOLANT TEMPERA-

TURE GAUGE

The gauge indicates engine coolant tempera-

ture.

Engine coolant temperature will vary with the

outside air temperature and driving condi-

tions.

CAUTION

If the gauge indicates over the nor-

mal range, stop the vehicle as soon

as safely possible. If the engine is

overheated, continued operation of

the vehicle may seriously damage

the engine. See ‘‘In case of

emergency’’ section for immediate

action required.

FUEL GAUGE

The gauge indicates the APPROXIMATE fuel

level in the tank.

The gauge may move slightly during braking,

turning, acceleration, or going up or down

hill.

The gauge needle is designed to remain in

approximately the same position, even when

the ignition key is turned ‘‘OFF’’.

Refill the fuel tank before the gauge

registers Empty.

SII0110

SII0111

INSTRUMENTS AND CONTROLS

1-5

Z 96.12.20/ X

COMPASS AND OUTSIDE

TEMPERATURE DISPLAY

(If so equipped)

This unit is a display unit which possesses the

following functions:

O Function to measure terrestrial magnetism

and indicate heading direction of vehicle

O Function to indicate outside air tempera-

ture

O Function to indicate caution for frozen road

surfaces

Outside temperature display

Push the switch when the ignition key is in the

‘‘ACC’’ or ‘‘ON’’ position. The outside tempera-

ture will be displayed in ‘‘°F’’.

O Selecting the indication range

Push the switch to change from ‘‘°F’’ to

‘‘°C’’.

O If the outside temperature drops below the

freezing point, the display indicates

ICE .

O When the outside temperature is

between 130°F (55°C) and 158°F

(70°C), the display shows 130°F

(55°C).

O When the outside temperature is

lower than −20°F (−30°C) or higher

than 158°F (70°C), the display

shows only ‘‘

---

’’ though it is oper-

ating. This is not a problem.

SII0112 SII0113

INSTRUMENTS AND CONTROLS

1-6

Z 96.12.20/ X

CAUTION

O

The outside temperature sensor

is installed in the front of the

radiator. The display may not in-

dicate the precise temperature

due to the heat of the road and

engine depending on the direc-

tion of the wind and driving con-

ditions, etc.

O

Use the ‘‘ICE’’ indication for ref-

erence only. Confirm the traffic

information and road conditions

to drive safely.

Compass display (If so

equipped)

Push the switch when the ignition key is in the

‘‘ACC’’ or ‘‘ON’’ position. The direction will be

displayed.

Zone variation change proce-

dure

The difference between magnetic north and

geographical north is known as variance. In

some areas, this difference can sometimes be

great enough to cause false compass read-

ings. Follow these instructions to set the

variance for your particular location if this

happens:

1. Establish your location on the zone map.

Record your zone number.

2. Push the ‘‘ON/OFF’’ switch in for five

seconds until the current zone entry num-

ber is displayed.

3. Press the ‘‘ON/OFF’’ switch repeatedly until

the new zone entry number is displayed.

Once the desired zone number is displayed,

stop pressing the ‘‘ON/OFF’’ switch and the

display will show compass direction within a

few seconds.

INSTRUMENTS AND CONTROLS

1-7

Z 96.12.20/ X

O If a magnet is located near the com-

pass or the vehicle is driven where

the terrestrial magnetism is dis-

turbed, the compass display may not

indicate the correct direction.

O In places where the terrestrial mag-

netism is disturbed, the correction of

the direction starts automatically,

extinguishing the direction bar. If

turn is made one or two times, the

correction is complete and the direc-

tion bar comes back on.

Correction functions of the com-

pass display

The compass display is equipped with auto-

matic correction function. If the direction is

not shown correctly, carry out the manual

correction procedure set out below.

Manual correction procedure

1. Push the switch for about 10 seconds. The

direction bar starts blinking.

SII0114

INSTRUMENTS AND CONTROLS

1-8

Z 96.12.20/ X

2. Drive the vehicle slowly in an open and

safe area. The initial correction is com-

pleted while turning in one or two turns.

CAUTION

In places where the terrestrial mag-

netism is extremely disturbed, the

initial correction procedure may

start automatically.

INSTRUMENTS AND CONTROLS

1-9

Z 96.12.20/ X

WARNING/INDICATOR LIGHT AND BUZZER

or Brake warning light Door open warning light

Automatic transmission park warning

light

Turn signal/hazard indicator lights Seat belt warning light CRUISE indicator light

High beam indicator light (Blue) Supplemental air bag warning light 4-wheel drive warning light

Charge warning light

or Anti-lock brake system

warning light

Transfer 4LO position indicator light

Engine oil pressure warning light Overdrive off indicator light 4-wheel drive indicator light

Low fuel warning light

Automatic transmission oil temperature

warning light

or Malfunction indicator light

Low washer fluid warning light

Checking bulbs

Turn the ignition key to ‘‘ON’’ without starting

the engine. The following lights will come on:

, or , , or ,

,

The following lights come on briefly and then

go off:

or , , ,

If any light fails to come on, it may indicate a

INSTRUMENTS AND CONTROLS

1-10

Z 96.12.20/ X

burned-out bulb or an open circuit in the

electrical system. Have the system repaired

promptly.

Engine oil pressure warn-

ing light

This light warns of low engine oil pressure. If

the light flickers or comes on during normal

driving, pull off the road in a safe area, stop

the engine immediately and call an INFINITI

dealer or other authorized repair shop.

The oil pressure warning light is not

designed to indicate a low oil level.

Use the dipstick to check the oil level.

See ‘‘Engine oil’’ in the ‘‘Do-it-yourself’’ sec-

tion.

CAUTION

Running the engine with the oil pres-

sure warning light on could cause

serious damage to the engine al-

most immediately. Turn off the en-

gine as soon as it is safe to do so.

See Section 5, In case of

emergency.

Charge warning light

If the light comes on while the engine is

running, it may indicate that there is some-

thing wrong with the charging system. Turn

the engine off and check the alternator belt. If

the belt is loose, broken, missing or if the

light remains on, see your INFINITI dealer

immediately.

CAUTION

Do not continue driving if the belt is

loose, broken or missing. In case of

emergency, see Section 5.

Low fuel warning light

This light comes on when the fuel in the tank

is getting low. Refuel as soon as it is

convenient, preferably before the fuel gauge

reaches ‘‘E’’.

There should be a small reserve of fuel

remaining in the tank when the fuel

gauge needle reaches ‘‘E’’.

Door open warning light

This light comes on when any of the doors are

not closed securely while the ignition key is

‘‘ON’’.

Supplemental air bag

warning light

When the ignition key is in the ‘‘ON’’ or

‘‘START’’ position, the supplemental air bag

light will illuminate for about 7 seconds and

then turn off. This means the system is

operational.

If any of the following conditions occur, the

INSTRUMENTS AND CONTROLS

1-11

Z 96.12.20/ X

supplemental air bag needs servicing and

your INFINITI must be taken to your nearest

authorized INFINITI dealer.

1. The supplemental air bag light goes off

within 7 seconds.

2. The supplemental air bag light flashes

intermittently or remains on (after 7 sec-

onds).

3. The supplemental air bag light does not

come on at all.

Unless checked and repaired, the Supplemen-

tal Restraint System may not function prop-

erly.

For additional details on the Supplemental Air

Bag System, see section 2.

WARNING

If the supplemental air bag warning

light is on, it could mean that the

supplemental air bag system will not

operate in an accident.

Seat belt warning light

and buzzer

The light and buzzer remind you to fasten seat

belts. The light illuminates whenever the

ignition key is turned to ‘‘ON’’, and will remain

illuminated until the driver’s seat belt is

fastened. At the same time, the buzzer will

sound for about six seconds unless the

driver’s seat belt is securely fastened.

Refer to ‘‘Seat belts’’ in the ‘‘Pre-driving

checks and adjustments’’ section for precau-

tions on seat belt usage.

Low washer fluid warning

light (For Canada)

This light comes on when the washer tank

fluid is at a low level. Add washer fluid as

necessary. See the ‘‘Do-it-yourself’’ section.

or Brake warning

light

This light functions for both the parking brake

and the foot brake systems.

Parking brake indicator

The light comes on when the parking brake is

applied.

Low brake fluid warning

The light warns of a low brake fluid level. If the

light comes on while the engine is running

with the parking brake not applied, stop the

vehicle and perform the following:

1. Check the brake fluid level. Add brake fluid

as necessary. See ‘‘Brake fluid’’ in the

‘‘Do-it-yourself’’ section.

2. If the brake fluid level is correct, have the

INSTRUMENTS AND CONTROLS

1-12

Z 96.12.20/ X

warning system checked by your INFINITI

dealer.

WARNING

O

Your brake system may not be

working properly if the warning

light is on. Driving could be dan-

gerous. If you judge it to be safe,

drive carefully to the nearest ser-

vice station for repairs. Other-

wise, have your vehicle towed.

O

Pressing the brake pedal with the

engine stopped could increase

your stopping distance and brak-

ing will require greater pedal ef-

fort as well as pedal travel.

O

If the level is below the MINIMUM

mark on the brake fluid reservoir,

do not drive until the brake sys-

tem has been checked at an

INFINITI dealer.

or Anti-lock brake

warning light

The light should turn off within 1 second after

turning the ignition switch to ‘‘ON’’. If not, the

system is malfunctioning.

If the light comes on while the engine is

running, it may indicate there is something

wrong with the anti-lock portion of the brake

system. In either case, have the system

checked by your INFINITI dealer.

If an abnormality occurs in the system, the

anti-lock function will cease but the ordinary

brakes will continue to operate normally.

If the light comes on while you are

driving, contact your INFINITI dealer for

repair.

Automatic transmission oil

temperature warning light

This light comes on when the automatic

transmission oil temperature is too high. If the

light comes on while driving, reduce the

vehicle speed as soon as safely possible until

the light turns off.

CAUTION

Continued vehicle operation when

the A/T oil temperature warning light

is on may damage the automatic

transmission.

Automatic transmission

park warning light

This light indicates that the automatic trans-

mission parking function is not engaged. If the

transfer control is not secured in any drive

position while the automatic transmission

selector lever is in the ‘‘P’’ position, the

transmission will disengage and the wheel will

not lock.

Shift the transfer control lever into the ‘‘H’’ or

INSTRUMENTS AND CONTROLS

1-13

Z 96.12.20/ X

‘‘4LO’’ position when the warning light comes

on.

WARNING

O

When parking, always make sure

that the transfer shift lever is in

‘‘H’’ or ‘‘4LO’’ and the parking

brake is set.

O

If the ATP light is ‘‘ON’’, this

indicates that the automatic

transmission ‘‘park’’ position will

not function and the transfer shift

lever is in neutral.

O

Failure to engage the transfer

shift lever in ‘‘H’’ or ‘‘4LO’’ could

result in the vehicle moving un-

expectedly, resulting in serious

personal injury or property

damage.

Turn signal/hazard indica-

tor lights

The light flashes when the turn signal switch

lever or hazard switch is turned on.

High beam indicator light

(Blue)

This light comes on when the headlight high

beam is on and goes out when the low beam

is selected.

CRUISE indicator light

The light comes on while the vehicle speed is

controlled by the cruise control system.

Overdrive off indicator

light

This light comes on when the automatic

transmission overdrive switch is set in the off

(

) position.

4-wheel drive warning

light

The 4-wheel drive warning light comes on

when the key switch is turned to ‘‘ON’’. It turns

off soon after the engine is started.

If any problem occurs during engine or

vehicle operation, the warning light will either

remain illuminated or blink.

CAUTION

If the warning light comes on or

blinks during operation, have your

vehicle checked by an authorized

INFINITI dealer as soon as possible.

Transfer 4LO position indi-

cator light

This light comes on when the transfer shift

lever is set in the ‘‘4LO’’ position with ignition

key in the ‘‘ON’’ position.

INSTRUMENTS AND CONTROLS

1-14

Z 96.12.20/ X

4-wheel drive indicator

light

The light should turn off within 1 second after

turning the ignition switch to ‘‘ON’’.

While the engine is running, the 4-wheel drive

indicator light will illuminate the position

selected by the transfer shift lever and/or 4WD

shift switch.

The 4-wheel drive indicator light will

blink while shifting from one drive

mode to the other.

Key reminder buzzer

The buzzer will sound if the driver side door is

opened while the key is left in the ignition

switch. Remove the key and take it with you

when leaving the vehicle.

Light reminder buzzer

A buzzer will sound when the driver side door

is opened if the light switch is turned on

unless the ignition key is in the ‘‘ON’’ position.

Turn the light switch off when you leave the

vehicle.

Brake pad wear warning

The disc brake pads have audible wear warn-

ings. When a brake pad requires replacement,

it will make a high pitched scraping sound

when the vehicle is in motion whether or not

the brake pedal is depressed. Have the brakes

checked as soon as possible if the warning

sound is heard when the vehicle is moving,

whether or not the brake pedal is depressed.

or Malfunction indi-

cator light (MIL)

If the Malfunction indicator light comes on

steady or blinks while the engine is running,

it may indicate a potential emission control

problem.

The Malfunction indicator light will come on

in one of two ways:

O Malfunction indicator light on steady —

An emission control system malfunction

has been detected. Have the vehicle in-

spected by an authorized INFINITI dealer.

You do not need to have your vehicle

towed to the dealer.

O Malfunction indicator light blinking — An

engine misfire has been detected which

may damage the emission control system.

To reduce or avoid emission control sys-

tem damage:

* do not drive at speeds above 45 MPH

(72 km/h).

* avoid hard acceleration or deceleration.

* avoid steep uphill grades.

* if possible, reduce the amount of cargo

being hauled or towed.

The malfunction indicator light may stop

blinking and come on steady.

Have the vehicle inspected by an autho-

rized INFINITI dealer. You do not need to

have your vehicle towed to the dealer.

INSTRUMENTS AND CONTROLS

1-15

Z 96.12.20/ X

Page is loading ...

Infiniti INFINITE QX 6, QX4 Owner's manual

Related papers

Other documents