Supermicro B11SCG-CTF User manual

USER MANUAL

Revision 1.0

B11SCG-ZTF

B11SCG-CTF

The information in this user’s manual has been carefully reviewed and is believed to be accurate. The vendor assumes

no responsibility for any inaccuracies that may be contained in this document, and makes no commitment to update

or to keep current the information in this manual, or to notify any person or organization of the updates. Please Note:

For the most up-to-date version of this manual, please see our website at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product described in this manual

at any time and without notice. This product, including software and documentation, is the property of Supermicro and/

or its licensors, and is supplied only under a license. Any use or reproduction of this product is not allowed, except

as expressly permitted by the terms of said license.

IN NO EVENT WILL Super Micro Computer, Inc. BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO USE THIS PRODUCT

OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER

MICRO COMPUTER, INC. SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED

OR USED WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,

INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa Clara County in the

State of California, USA. The State of California, County of Santa Clara shall be the exclusive venue for the resolution

of any such disputes. Supermicro's total liability for all claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class A digital device

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the manufacturer’s instruction manual,

may cause harmful interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warning applies only

to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate Material-special handling may apply.

See www.dtsc.ca.gov/hazardouswaste/perchlorate”.

WARNING: This product can expose you to chemicals including

lead, known to the State of California to cause cancer and birth

defects or other reproductive harm. For more information, go

to www.P65Warnings.ca.gov.

!

The products sold by Supermicro are not intended for and will not be used in life support systems, medical equipment,

nuclear facilities or systems, aircraft, aircraft devices, aircraft/emergency communication devices or other critical

systems whose failure to perform be reasonably expected to result in signicant injury or loss of life or catastrophic

property damage. Accordingly, Supermicro disclaims any and all liability, and should buyer use or sell such products

for use in such ultra-hazardous applications, it does so entirely at its own risk. Furthermore, buyer agrees to fully

indemnify, defend and hold Supermicro harmless for and against any and all claims, demands, actions, litigation, and

proceedings of any kind arising out of or related to such ultra-hazardous use or sale.

Manual Revision: 1.0

Release Date: May 30th, 2019

Unless you request and receive written permission from Super Micro Computer, Inc., you may not copy any part of this

document. Information in this document is subject to change without notice. Other products and companies referred

to herein are trademarks or registered trademarks of their respective companies or mark holders.

Printed in the United States of America

3

Preface

About This Manual

This manual is written for system integrators, IT technicians, and knowledgeable end users.

It provides information for the installation and use of the B11SCG-ZTF/CTF motherboard.

About This Motherboard

The B11SCG-CTF motherboard supports the Intel® Xeon® E-2100 processor, 8th/9th

Generation Intel Core i3/Pentium®/Celeron® processors. The B11SCG-ZTF motherboard

supports an 8th/9th generation Intel Core i7/i5/i3/Pentium/Celeron processors in an LGA1151

(H4) socket. With the Intel C246 (CTF) and Q370 (ZTF) chipset, this motherboard supports

DDR4 2666MHz memory, SATA 3.0 connectors, PCIe 3.0 slots, M.2 slots, and IPMI. Please

note that this motherboard is intended to be installed and serviced by professional technicians

only. For processor/memory updates, please refer to our website at http://www.supermicro.

com/products/.

Manual Organization

Chapter 1 describes the features, specications and performance of the motherboard, and

provides detailed information on the Intel® Xeon® E-2100.

Chapter 2 provides hardware installation instructions. Read this chapter when installing the

processor, memory modules, and other hardware components into the system.

If you encounter any problems, see Chapter 3, which describes troubleshooting procedures

for video, memory, and system setup stored in the CMOS.

Chapter 4 includes an introduction to the BIOS, and provides detailed information on running

the BIOS Setup utility.

Appendix A provides BIOS Error Beep Codes.

Appendix B lists software program installation instructions.

Appendix C lists standardized warning statements in various languages.

Appendix D provides UEFI BIOS Recovery instructions.

4

Contacting Supermicro

Headquarters

Address: Super Micro Computer, Inc.

980 Rock Ave.

San Jose, CA 95131 U.S.A.

Tel: +1 (408) 503-8000

Fax: +1 (408) 503-8008

Email: [email protected] (General Information)

[email protected] (Technical Support)

Website: www.supermicro.com

Europe

Address: Super Micro Computer B.V.

Het Sterrenbeeld 28, 5215 ML

's-Hertogenbosch, The Netherlands

Tel: +31 (0) 73-6400390

Fax: +31 (0) 73-6416525

Email: [email protected] (General Information)

[email protected] (Technical Support)

[email protected] (Customer Support)

Website: www.supermicro.nl

Asia-Pacic

Address: Super Micro Computer, Inc.

3F, No. 150, Jian 1st Rd.

Zhonghe Dist., New Taipei City 235

Taiwan (R.O.C)

Tel: +886-(2) 8226-3990

Fax: +886-(2) 8226-3992

Email: [email protected]

Website: www.supermicro.com.tw

Super B11SCG-ZTF/CTF User's Manual

5

Table of Contents

Chapter 1 Introduction

1.1 Checklist ...............................................................................................................................8

Quick Reference ...............................................................................................................11

Quick Reference Table ......................................................................................................12

Motherboard Features .......................................................................................................13

1.2 Processor and Chipset Overview .......................................................................................16

1.3 Special Features ................................................................................................................16

Recovery from AC Power Loss .........................................................................................16

1.4 System Health Monitoring ..................................................................................................16

Onboard Voltage Monitors ................................................................................................16

Fan Status Monitor with Firmware Control .......................................................................17

Environmental Temperature Control .................................................................................17

System Resource Alert......................................................................................................17

1.5 ACPI Features ....................................................................................................................17

Chapter 2 Installation

2.1 Static-Sensitive Devices .....................................................................................................18

Precautions .......................................................................................................................18

Unpacking .........................................................................................................................18

2.2 Motherboard Installation .....................................................................................................19

Tools Needed ....................................................................................................................19

Location of Mounting Holes ..............................................................................................19

Installing the Motherboard.................................................................................................20

Installing the Motherboard into the Superblade Chassis ..................................................21

2.3 Processor and Heatsink Installation ...................................................................................22

Installing the LGA1151 Processor .....................................................................................22

Installing a Passive CPU Heatsink ...................................................................................25

Removing the Heatsink .....................................................................................................26

2.4 Memory Support and Installation .......................................................................................27

Memory Support ................................................................................................................27

DIMM Module Population Conguration ...........................................................................27

DIMM Module Population Sequence ................................................................................27

Preface

6

DIMM Installation ..............................................................................................................28

DIMM Removal .................................................................................................................28

2.5 Connectors .........................................................................................................................29

Power Connections ...........................................................................................................29

2.6 Jumper Settings .................................................................................................................38

How Jumpers Work ...........................................................................................................38

2.7 LED Indicators ....................................................................................................................44

Chapter 3 Troubleshooting

3.1 Troubleshooting Procedures ..............................................................................................45

Before Power On ..............................................................................................................45

No Power ..........................................................................................................................45

No Video ...........................................................................................................................45

System Boot Failure ..........................................................................................................46

Memory Errors ..................................................................................................................46

Losing the System's Setup Conguration .........................................................................47

When the System Becomes Unstable ..............................................................................47

3.2 Technical Support Procedures ...........................................................................................49

3.3 Frequently Asked Questions ..............................................................................................50

3.4 Battery Removal and Installation .......................................................................................51

Battery Removal ................................................................................................................51

Proper Battery Disposal ....................................................................................................51

Battery Installation .............................................................................................................51

3.5 Returning Merchandise for Service ....................................................................................52

Chapter 4 UEFI BIOS

4.1 Introduction .........................................................................................................................53

Starting the Setup Utility ...................................................................................................53

4.2 Main ....................................................................................................................................54

4.3 Advanced .............................................................................................................................56

4.4 Event Logs ..........................................................................................................................78

4.5 IPMI ................................................................................................................................... 80

4.6 Security ...............................................................................................................................83

B11SCG-ZTF/CTF User Manual

7

Preface

4.7 Boot ....................................................................................................................................87

4.8 Save & Exit .........................................................................................................................90

Appendix A UEFI BIOS Codes

Appendix B Software Installation

B.1 Installing Software Programs .............................................................................................94

Appendix C Standardized Warning Statements

Battery Handling ................................................................................................................96

Product Disposal ...............................................................................................................98

D.1 Overview .............................................................................................................................99

D.2 Recovering the UEFI BIOS Image .....................................................................................99

D.3 Recovering the Main BIOS Block with a USB Device .....................................................100

Appendix E Dual Boot Block

BIOS Boot Block .............................................................................................................104

BIOS Boot Block Corruption Occurrence ......................................................................104

8

Super B11SCG-ZTF/CTF User's Manual

Main Parts List

Description Part Number Quantity

Supermicro B11SCG-ZTF Motherboard - Intel Q370 Chipset B11SCG-ZTF 1

Supermicro B11SCG-CTF Motherboard - Intel C246 Chipset B11SCG-CTF 1

Chapter 1

Introduction

Congratulations on purchasing your computer motherboard from an industry leader. Supermicro

boards are designed to provide you with the highest standards in quality and performance.

Several important parts that are included with the motherboard are listed below. If anything

listed is damaged or missing, please contact your retailer.

1.1 Checklist

Important Links

For your system to work properly, please follow the links below to download all necessary

drivers/utilities and the user’s manual for your server.

• Supermicro product manuals: http://www.supermicro.com/support/manuals/

• Product drivers and utilities: https://www.supermicro.com/wftp/driver/

• Product safety info: http://www.supermicro.com/about/policies/safety_information.cfm

• If you have any questions, please contact our support team at: [email protected]m

This manual may be periodically updated without notice. Please check the Supermicro website

for possible updates to the manual revision level.

9

Chapter 1: Introduction

Figure 1-1. B11SCG-CTF/ZTF Motherboard Image

Note: All graphics shown in this manual were based upon the latest PCB revision

available at the time of publication of the manual. The motherboard you received may

or may not look exactly the same as the graphics shown in this manual.

10

Super B11SCG-ZTF/CTF User's Manual

MAC CODE

BAR CODE

BIOS LICENSE

7

1

DESIGNED IN USA

B11SCG-CTF/ZTF

REV:1.01

BT1

JPWR3

JBT1

MH1

MH3

MH5

MH7

MH8

JPWR2

I-SATA3

I-SATA4

PWR1

JKVM1

BMC_HB_LED1

JTPM1

JSD1

JDBG1

J2

J5

JPG1

JPME1

JWD1

JVR1

JPME2

JBR1

JPO1

JFP1

MH2

MH6

MH4

J4

M.2-H

PCIE 3.0 x16

CPU

JPG1:

1-2:ENABLE

2-3:DISABLE

JPTM1:TPM/PORT80

JPO1:

2-3:DISABLE

1-2:ENABLE

JSD1:SATA DOM POWER

JPME2:

1-2:NORMAL

2-3:ME MANUFACTURING MODE

VGA

JWD1:WATCH DOG

2-3:NMI

1-2:RES

JPME1:

1-2:NORMAL

2-3:ME RECOVERY

CMOS

CLEAR

JBR1:

1-2:NORMAL

2-3:BIOS RECOVERY

DIMMA2

DIMMA1

DIMMB1

DIMMB2

X710

PCH

C246/Z370

BMC

AST2500

DIMMA1

DIMMA2

DIMMB1

DIMMB2

Figure 1-2. B11SCG-CTF/ZTF Motherboard Layout

(not drawn to scale)

Note: Components not documented are for internal testing only.

11

Chapter 1: Introduction

MAC CODE

BAR CODE

BIOS LICENSE

7

1

DESIGNED IN USA

B11SCG-CTF/ZTF

REV:1.01

BT1

JPWR3

JBT1

MH1

MH3

MH5

MH7

MH8

JPWR2

I-SATA3

I-SATA4

PWR1

JKVM1

BMC_HB_LED1

JTPM1

JSD1

JDBG1

J2

J5

JPG1

JPME1

JWD1

JVR1

JPME2

JBR1

JPO1

JFP1

MH2

MH6

MH4

J4

M.2-H

PCIE 3.0 x16

CPU

JPG1:

1-2:ENABLE

2-3:DISABLE

JPTM1:TPM/PORT80

JPO1:

2-3:DISABLE

1-2:ENABLE

JSD1:SATA DOM POWER

JPME2:

1-2:NORMAL

2-3:ME MANUFACTURING MODE

VGA

JWD1:WATCH DOG

2-3:NMI

1-2:RES

JPME1:

1-2:NORMAL

2-3:ME RECOVERY

CMOS

CLEAR

JBR1:

1-2:NORMAL

2-3:BIOS RECOVERY

DIMMA2

DIMMA1

DIMMB1

DIMMB2

X710

PCH

C246/Z370

BMC

AST2500

DIMMA1

DIMMA2

DIMMB1

DIMMB2

Notes:

• See Chapter 2 for detailed information on jumpers, I/O ports, and JF1 front panel connec-

tions.

• " " indicates the location of Pin 1.

Quick Reference

BMC_HB_LED1

JTPM1

PWR1

JPO1

J4

JPG1

JWD1

JBT1

JKVM1

DIMMA2

DIMMA1

DIMMB2

DIMMB1

JPWR3

JDBG1

JPW2

JVR1

M.2-H

JFP1

BT1

JPME2

JBR1

JSD1

JPME1

I-SATA4

PCIe x16

J5

I-SATA3

12

Super B11SCG-ZTF/CTF User's Manual

Quick Reference Table

Jumper Description Default Setting

J5 PCIe Expansion Option

Pins 1-2 (x8 Slot1/x8 Slot 2 or x16

Slot1)

JBR1 BIOS Recovery Pins 1-2 (Normal)

JBT1 Clear CMOS Short: Clear CMOS

Open: Normal

JPG1 VGA Enable/Disable Pins 1-2 (Enabled)

JPME1 ME Recovery Pins 1-2 (Normal)

JPME2 Manufacturing Mode Select Pins 1-2 (Normal)

JWD1 Watch Dog Enable Pins 1-2 (Reset)

LED Description Status

BMC_HB_LED1 BMC Heartbeat LED GREEN Blinking: Normal

Connector Description

BT1 Onboard CMOS Battery

I-SATA4/I-SATA3 Intel® PCH SATA 3.0 Ports

J4 CPLD Programming Header (Manufacturing Use Only)

JDBG1 VRM Debug Jumper (Manufacturing Use Only)

JFP1 Front Panel Cable Connector

JKVM1 VGA/USB Module Connector

JPO1 Power Button Bypass (Manufacturing Use Only)

JPWR2 12V GPU Card Power Connector

JPWR3 4-pin Power Connector for SATA/SAS

JSD1 SATA DOM Power Connectors

JTPM1 Trusted Platform Module (TPM)/Port 80 Connector

JVR1 VRM Programming Header (Manufacturing Use Only)

M.2-H M.2 Slot

PWR1 Power Receptable to Chassis Backplane

13

Chapter 1: Introduction

Motherboard Features

CPU

• B11SCG-CTF supports Intel Xeon E-2100 and 8th/9th Generation Core i3 processors in a LGA1151 (H4) socket.

• B11SCG-ZTF supports Intel 8th/9th Generation Core i7/i5/i3 processors in an LGA1151 (H4) socket..

Memory

• B11SCG-CTF supports up to 128GB of ECC UDIMM memory with speeds of up to 2666MHz.

• B11SCG-ZTF supports up to 64GB of DDR4 Non-ECC UDIMM with speeds up to 2666MHz.

DIMM Size

• 4GB, 8GB, 16GB, (32GB exclusive for -CTF only)

Chipset

• B11SCG-CTF: Intel C246

• B11SCG-ZTF: Intel Q370

Expansion Slots

• One (1) PCIe 3.0 x16 slot

• One (1) M.2 M-Key slot

Network

• Intel® Dual X710 10GbE via Blade Backplane

Baseboard Management Controller (BMC)

• ASpeed AST 2500

Graphics

• Graphics controller via ASpeed AST2500

I/O Devices

• SATA 3.0 • Two (2) SATA 3.0 port

Peripheral Devices

• Two (2) USB 2.0 ports via JKVM1 header (debug only)

BIOS

• 256Mb AMI BIOS® SPI Flash BIOS

• ACPI 6.2, UEFI 2.7, SMBIOS 2.8/3.2, PCI FW 3.1, PnP, Real Time Clock wake-up, Dual-BootBlock, BMC GPIO

Motherboard Features

Note: The table above is continued on the next page.

14

Super B11SCG-ZTF/CTF User's Manual

Motherboard Features

Power Management

• ACPI power management

• S1 and S5

• Wake-On-LAN (JWOL)

• Power-on mode for AC power recovery

System Health Monitoring

• Onboard voltage monitors for CPU cores, +1.8V, +3.3V, +5V, +/-12V, +3.3V Stdby, +5V Stdby, VBAT, HT, Memory, PCH

Temperature, System Temperature, and Memory Temperature

• CPU 6+2-phase switching voltage regulator

• CPU/System overheat control

• CPU Thermal Trip support

• PECI/TSI

Fan Control

• Fan speed control

System Management

• PECI (Platform Environment Conguration Interface) 3.1 support

• IPMI 2.0

• Watch Dog / Non-maskable interrupt

LED Indicators

• Power/suspend-state indicator LED

• UID / remote UID

• LAN activity LED

Other

• RoHS

Dimensions

• Superblade 8U/20 form factor (9.1" x 6.3") (231.14 mm x 160.02 mm)

Note 1: The CPU maximum thermal design power (TDP) is subject to chassis and

heatsink cooling restrictions. For proper thermal management, please check the chas-

sis and heatsink specications for proper CPU TDP sizing.

Note 2: For IPMI conguration instructions, please refer to the Embedded IPMI Con-

guration User's Guide available at http://www.supermicro.com/support/manuals/.

Note 3: If you purchase Supermicro Out of Band (OOB) software license key

(Supermicro P/N: SFT-OOB--LIC), please DO NOT change IPMI MAC address. Once

the Mac address has been changed, the OOB license key will be invalid.

15

Chapter 1: Introduction

Note: This is a general block diagram and may not exactly represent the features on

your motherboard. See the previous pages for the actual specications of your moth-

erboard.

Figure 1-3.

Chipset Block Diagram

2666MHz

DDR4 (CHA)

DDR4 (CHB)

2666MHz

DIMMA0

DIMMB0

DIMMA1

DIMMB1

PCIe 3.0 x16

8.0GT/s

RGMII

SATA-III

6Gb/s

1 X SATA-III

Port [12~9]

1000BASE-X

1Gb/s

Intel X710-BM2

PCIe3.0_x4

8.0GT/s

2 x 10GBASE-KR

10Gbps

BPN CONNECTOR

TPM1.2 Header

JKVM1

RGB

UART

480 Mbps

2 x USB 2.0

Port [21-24]

Port [18]

X16 Riser

USB2[1-2]

IMVP8

INTEL LGA1151

SVID

IMVP8

8GT/s

x4 DMI

SATA-III

6Gb/s

Intel

PCH-H

Z370/C246

(Socket-H4)

FLASH

SPI 128Mb

SPI

RTL8211FS

AST2500

PCIe 2.0 x1

8.0GT/s

1 X SATA-III DOM

Port [17]

PCIe3.0 x4

8.0GT/s

M.2 PCIE / SATA SSD

SATA-III

6Gb/s

16

Super B11SCG-ZTF/CTF User's Manual

1.2 Processor and Chipset Overview

The Supermicro B11SCG-CTF motherboard supports Intel Xeon E-2100 processors, and

8th/9th Generation Intel Core™ i3/Pentium/Celeron processors. The B11SCG-ZTF supports

the 8th/9th generation Intel Core i7/i5/i3/Pentium/Celeron processor in an LGA1151 (H4)

socket. The Super Blade Xeon upholds optimized performance, oering up to 64GB (ZTF)

of Non-ECC UDIMM memory and 128GB (CTF) of ECC UDIMM DDR4 with speeds of up

to 2666MHZ, while oering performance, reliability, and high intelligence. It is optimized for

all workstation applications, for example, 3D modeling, rendering, video editing, engineering

simulation, and automation.

This platform supports the following features:

• ACPI Power Management

• Adaptive Thermal Management/Monitoring

1.3 Special Features

This section describes the health monitoring features of the B11SCG-ZTF/CTF motherboard.

The motherboard has an onboard System Hardware Monitor chip that supports system health

monitoring.

Recovery from AC Power Loss

The Basic I/O System (BIOS) provides a setting that determines how the system will respond

when AC power is lost and then restored to the system. You can choose for the system to

remain powered o (in which case you must press the power switch to turn it back on), or

for it to automatically return to the power-on state. See the Advanced BIOS Setup section

for this setting. The default setting is Last State.

1.4 System Health Monitoring

Onboard Voltage Monitors

The onboard voltage monitor will continuously scan crucial voltage levels. Once a voltage

becomes unstable, it will give a warning or send an error message to the screen. Users can

adjust the voltage thresholds to dene the sensitivity of the voltage monitor. Real time readings

of these voltage levels are all displayed in BIOS.

17

Chapter 1: Introduction

Fan Status Monitor with Firmware Control

The system health monitor chip can check the RPM status of a cooling fan. The CPU and

chassis fans are controlled by BIOS Thermal Management.

Environmental Temperature Control

System health sensors monitor temperatures and voltage settings of onboard processors

and the system in real time via the IPMI interface. Whenever the temperature of the CPU or

the system exceeds a user-dened threshold, system/CPU cooling fans will be turned on to

prevent the CPU or the system from overheating

Note: To avoid possible system overheating, please be sure to provide adequate air-

ow to your system.

System Resource Alert

This feature is available when used with SuperDoctor 5® in the Windows OS or in the Linux

environment. SuperDoctor is used to notify the user of certain system events. For example,

you can congure SuperDoctor to provide you with warnings when the system temperature,

CPU temperatures, voltages, and fan speeds go beyond a predened range.

1.5 ACPI Features

ACPI stands for Advanced Conguration and Power Interface. The ACPI specication denes

a exible and abstract hardware interface that provides a standard way to integrate power

management features throughout a computer system, including its hardware, operating

system and application software. This enables the system to automatically turn on and o

peripherals such as CD-ROMs, network cards, hard disk drives and printers.

In addition to enabling operating system-directed power management, ACPI also provides a

generic system event mechanism for Plug and Play, and an operating system-independent

interface for conguration control. ACPI leverages the Plug and Play BIOS data structures,

while providing a processor architecture-independent implementation that is compatible with

Windows10 and Windows Server Operating Systems.

18

Super B11SCG-ZTF/CTF User's Manual

Chapter 2

Installation

2.1 Static-Sensitive Devices

Electrostatic Discharge (ESD) can damage electronic com ponents. To prevent damage to your

motherboard, it is important to handle it very carefully. The following measures are generally

sucient to protect your equipment from ESD.

Precautions

• Use a grounded wrist strap designed to prevent static discharge.

• Touch a grounded metal object before removing the board from the antistatic bag.

• Handle the board by its edges only; do not touch its components, peripheral chips, memory

modules or gold contacts.

• When handling chips or modules, avoid touching their pins.

• Put the motherboard and peripherals back into their antistatic bags when not in use.

• For grounding purposes, make sure your computer chassis provides excellent conductivity

between the power supply, the case, the mounting fasteners and the motherboard.

• Use only the correct type of onboard CMOS battery. Do not install the onboard battery

upside down to avoid possible explosion.

Unpacking

The motherboard is shipped in antistatic packaging to avoid static damage. When unpacking

the motherboard, make sure that the person handling it is static protected.

19

Chapter 2: Installation

MAC CODE

BAR CODE

BIOS LICENSE

7

1

DESIGNED IN USA

B11SCG-CTF/ZTF

REV:1.01

BT1

JPWR3

JBT1

MH1

MH3

MH5

MH7

MH8

JPWR2

I-SATA3

I-SATA4

PWR1

JKVM1

BMC_HB_LED1

JTPM1

JSD1

JDBG1

J2

J5

JPG1

JPME1

JWD1

JVR1

JPME2

JBR1

JPO1

JFP1

MH2

MH6

MH4

J4

M.2-H

PCIE 3.0 x16

CPU

JPG1:

1-2:ENABLE

2-3:DISABLE

JPTM1:TPM/PORT80

JPO1:

2-3:DISABLE

1-2:ENABLE

JSD1:SATA DOM POWER

JPME2:

1-2:NORMAL

2-3:ME MANUFACTURING MODE

VGA

JWD1:WATCH DOG

2-3:NMI

1-2:RES

JPME1:

1-2:NORMAL

2-3:ME RECOVERY

CMOS

CLEAR

JBR1:

1-2:NORMAL

2-3:BIOS RECOVERY

DIMMA2

DIMMA1

DIMMB1

DIMMB2

X710

PCH

C246/Z370

BMC

AST2500

DIMMA1

DIMMA2

DIMMB1

DIMMB2

Location of Mounting Holes

Note: 1) To avoid damaging the motherboard and its components, please do not use

a force greater than 8 lb/inch on each mounting screw during motherboard installation.

2) Some components are very close to the mounting holes. Please take precautionary

measures to avoid damaging these components when installing the motherboard to

the chassis.

2.2 Motherboard Installation

All motherboards have standard mounting holes to t dierent types of chassis. Make sure

that the locations of all the mounting holes for both the motherboard and the chassis match.

Although a chassis may have both plastic and metal mounting fasteners, metal ones are

highly recommended because they ground the motherboard to the chassis. Make sure that

the metal standos click in or are screwed in tightly.

Phillips Screwdriver (1)

Standos (8)

Only if Needed

Phillips Screws (8)

Tools Needed

20

Super B11SCG-ZTF/CTF User's Manual

Installing the Motherboard

1. Locate the mounting holes on the motherboard. See the previous page for the location.

2. Locate the matching mounting holes on the chassis. Align the mounting holes on the

motherboard against the mounting holes on the chassis.

3. Install standos in the chassis as needed.

4. Install the motherboard into the chassis carefully to avoid damaging other motherboard

components.

5. Using the Phillips screwdriver, insert a Phillips head #6 screw into a mounting hole on

the motherboard and its matching mounting hole on the chassis.

6. Repeat Step 5 to insert the remaining screws into all mounting holes.

7. Make sure that the motherboard is securely placed in the chassis.

Note: Images displayed are for illustration only. Your chassis or components might

look dierent from those shown in this manual.

Page is loading ...

Supermicro B11SCG-CTF User manual

This manual is also suitable for

Supermicro B11SCG-CTF User manual

Related papers

Other documents