Dante DLS1621A51 Operating instructions

Dante
Brand
Dante
Model
DLS1621A51
Category
Security cameras
Type
Operating instructions
1
DLS1621
High Resolution
Low Light D/N Camera
Installation and Operations Manual
Model Number: DLS1621
Description: 1/3” High Resolution 480TVL
Low Light D/N Mobile Camera
2
1.0 Introduction 3
2.0 Features 3
3.0 Adjustment 4
Caution 5
4.0 Accessories List 5
5.0 Installation 6
6.0 Outline Dimensions 7
7.0 Specifications 8
8.0 Ordering Information 8
Table of Contents
3
1.0 Introduction
The DLS1621 Series are 1/3” CCD, high resolution 480TVL, Low Light Day/Night Mobile
cameras. Units are designed with advanced DSP technology to provide outstanding quality
images under normal and low light illumination. Configured with various choices of board
lenses, cameras feature built-in IR LEDs and a full complement of image controls, including
AWB, AGC and BLC. Included are Aluminum body, sun shield, anti vibration, shock and water-
proof construction. Powered by 12VDC, the DLS1621 Series are a perfect choice for
demanding commercial and industrial mobile video surveillance installations.
2.0 Features
* NTSC and PAL High Resolution 480TVL Low Light Day/Night Mobile Camera
* 1/3” CCD Image Sensor, built-in IR LED
* Minimum Illumination 1.0LUX/F2 (Color LED Off); 0LUX (B/W LED on)
* Fixed Board Lens 2.8, 3.6, 8 and 12mm
* AWB, AGC and BLC functions
* Anti Vibration, Shock & Water Proof features
* Aluminum body and built-in Sun Shield
* Available with 12VDC power supply
4
3.0 Adjustment
The camera's performance may be adjusted as needed to meet the installer's particular
requirements via the built-in DIP Switch. This work is to be performed only by Certified
Technicians.
Steps to follow:
1. Unscrew the main camera body from the base assembly. Remove the camera PCB out of the
body.
2. Adjust DIP Switch settings as needed to adjust camera parameters.
No. Item Default
Function
1
Mirror Off MIR
Mirror
2
BLC Off Off Normal
BLC
Back light
Compensation
Off
Normal
5
Do not disassemble or repair the camera to avoid possible fire, electric shock or other hazard.
Please refer to qualified service technicians for any malfunction. Carefully install the camera.
Do not scratch the camera unit, especially the lens. Avoid Shock, vibration. Do not install
camera on an unstable surface. It can be damaged by improper use or storage. Never point
the camera towards direct sunlight or other bright objects regardless if power is on or off in
order to avoid dim image or smear. Use the camera within given temperature, humidity, and
electricity limit. Turn off camera if the malfunction includes overheating or smoke -please
contact reseller.
4.0 Accessories List
Unpack the box carefully and check the accessories against the following parts list:
Should any parts be missing, please contact reseller.
No.
Items Quantity
1
Sunshield Housing 1pc
2
Screws, washer, spring washer, special tools
etc 1 bag
3
Camera 1 pc
4
Mounting Bracket 1 pc
5
Instruction 1 copy
6
5.0 Installation
1. Prepare a space to mount the camera and mark the mounting holes for bracket.
2. Drill the bracket mounting holes (4mm).
3. Use screws (M5X12mm) and spring washers to fix the camera bracket.
4. Adjust the bracket angle and mount the sunshield housing on the bracket.
5. Mount the screws (M4X8mm) in the mounting holes.
6. Connect camera with a 12VDC adapter and the video BNC connector. Power up camera
and a video image will appear on the monitor. Adjust the angle of the camera and tighten
screws to fix the position of the camera.
Line Diagram
7
Model Color 1/10 Color 2/10 Color 1/20 Color 2/20
Signal
System
PAL NTSC
6.0 Outline Dimensions
8
7.0
Specifications
DLS11621 Product Specifications
Image Sensor: 1/3” IT CCD
Effective Pixels (HxV): NTSC: 768 X 494 PAL: 752 X 582
Super High Resolution: 480TVL
Minimum Illumination: Color 1.0LUX/F2 (LED off); B/W 0LUX (LED on)
S/N Ratio: > 50 dB
Day/Night Auto Switch: Illumination <1 ~ 3 LUX/F2
Auto Electronic Shutter: NTSC: 1/60 ~ 1/100,000 sec; PAL: 1/50 ~ 1/100,000 sec
White Balance: Automatic
AGC: Automatic
BLC: ON/OFF
Gamma Correction: 0.45
Sync. Mode: Internal
Lens: Fixed Board f=2.8mm, 3.6mm, 8mm & 12mm
IR LED: 850nm Wavelength
IR LED Drive: On: 1 ~ 3 LUX; Off: 5 ~ 6 LUX
Video Output: 1.0V p-p (75 Ohm), BNC
Power Supply: 12VDC
Power Consumption: 200mA (max with LED on)
Operating Temp.: 14°F~122°F (-10°C~50°C)
Operating Humidity: 0-95% non-condensing
Dimensions L x W x H: 3.15” (80mm) X 2.13” (54mm) X 1.65” (42mm)
Weight: 10 oz (280g)
Construction: Aluminum body, Polycarbonate, Water-proof
Regulatory Compliance: CE, FCC
Manufactured to: ISO9001:2000 Standards
8.0 Model Number Overview
DLS1621A51 NTSC 1/3” Low Light Day/Night Mobile Camera, High Resolution 480TVL, 12VDC
DLS1621B81 PAL 1/3” Low Light Day/Night Mobile Camera, High Resolution 480TVL, 12VDC
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Dante DLS1621A51 Operating instructions

Dante
Brand
Dante
Model
DLS1621A51
Category
Security cameras
Type
Operating instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents