2. Home
  3. Domestic appliances
  4. Sewing & ironing
  5. Irons
  6. Philips
  7. GC6630/20
GC6630/20

Philips GC6630/20 Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the Philips GC6630/20 Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
1. Usage of right water type
2. Steam control
Steam
will enhance your ironing performance.
Control the steam while ironing by using the steam trigger.
Important
information
To enjoy the most out of your new steam generator, please read carefully.
For further information on usage and troubleshooting, please read
the user manual.
SpeedCare
Demineralised water if you
live in hard water area
Tap water
DO NOT USE:
Perfumed water, vinegar,
descaling agents, ironing
aids etc.
FOR FIRST USE:
Turn the temperature
dial to
••
or higher
and press the trigger
continuously for up to
30 seconds for steam.
Tap water
Demineralised water
Read and
keep me
OR
Please
turn over for
descaling
Any questions?
Don’t go back to store, Philips is here to help. Contact us directly.
Don’t go back to store, Philips is here to help. Contact us directly.
www.philips.com/support
0207 949 0240
015245443
OROR
Press and hold the steam trigger
for steam during ironing.
GC6600_SpeedCare_4239.001.0031.1_cHR.pdf 1 22-09-15 11:54
1
Perform descaling once the
descaling light ashes and the
appliance beeps.
The steam function will be
disabled automatically if
descaling is not performed.
4. Performing descaling
Fill the water tank halfway and
switch on the appliance.
Turn the temperature dial
to ‘
CALC CLEAN
’.
Place the iron on the Calc-Clean
container on an even, stable surface.
Press and hold the ‘
CALC CLEAN
’
button for
2 seconds
until you
hear short beeps.
Wait approximately
2 minutes
.
You will hear short beeps.
When t
he descaling process is
completed
, the iron stops beeping.
Press
2 sec
2 min
• Do not leave the appliance unattended during the descaling process.
• Hot water and steam will come out of the soleplate.
• Do not interrupt the descaling process (approx. 2 minutes).
With the
Calc-Clean container
provided, you can perform
descaling easily and
get clean steam.
3. Sound and light descaling reminder
With the new Smart Calc-Clean feature, you’ll be reminded to descale your appliance when this is needed.
Calc-Clean
Container
4239.001.0031.1
Steam function
disabled
GC6600_SpeedCare_4239.001.0031.1_cHR.pdf 2 22-09-15 11:54
/