Commax CDL-200L Owner's manual

Commax
Brand
Commax
Model
CDL-200L
Type
Owner's manual
CDL-200L
USER MANUAL
제품의 외관 및 사양등은 제품 개량을 위해 사전예고 없이 변경될 수 있습니다. 제품의 색상은 인쇄과정으로 인해 실제와 약간 다를수 있습니다.
본 리플렛에 실린 모든 사진을 불법으로 도용했을 경우, 저작권법에 의거 민/형사상의 책임을 지게 되니 무단전제와 복제를 금합니다.
Durable Door lock without worry about A/S
Durable body of metal
Auto lock/rewind/double lock function
Use of 3D touch and imaginary function to secure password
Password/Smart key can be registered multiple
Multi-level volume control / Selectable silence function
Light button that is visible even in dark places
Emergency power function (9V square battery)
High-voltage protection/Fire protection/Anti-hack system
Intuitive registration UI
* Do not disassemble, repair or modify the device by any unauthorized person.
* This product is for indoor, we do not guarantee any operation at other environment.
* Please use the product after reading User’s Manual.
* Do not press the buttons with any tools(Ex. Awl, Pins..)
* Change your access code from time to time for your safety.
* Do not impact on the device.
* Be careful that leakage or rupture may occur when inserting a battery in wrong direction.
* Be careful that water should not seep into the device.
* When replacing a battery, change all the batteries with new alkaline batteries.
* Please wipe the product with soft, dry towels.
* Please keep product warranty card for A/S.
* Do not use this product with other purposes except digital door lock function.
Products specifications and components
Outdoor Names and Functions
*The components of the product may change depending
on the installation environment.
Due to non-key door lock, it may cause
destruction of digital door lock when it is in trouble.
1. It is a function to strengthen the security of password
and it is a function to set a virtual number instead of the
original number when the password is registered and
authenticated for more than 1 second.
Ex) When 1 is long pressed: It is recognized as a virtual
number other than 1.
2. Combined with the imaginary function of this product,
password security is further strengthened.
3. You can set each number and you can check that the
lamp blinks when you press for more than 1 second.
4. 3D touch mode is turned off at the factory.
Reference
1. When the 3D touch mode is released, the password is
reset to "1234".
2. In case of master registration / deletion, fire / accident, etc.,
it is recognized as normal number mode.
Cautions
How to set and dismiss 3D touch
Beep
Open the battery cover and
press the [Registration] button.
1. Enter password 2. Press the [#] button twice in
succession, then press
the 0 button.
Touch the outdoor
license plate to
turn on the LED
and enter the
registered password.
3. Press [Registration]button
When you press the [Registration] button on the outdoor
side body, the 3D touch function is turned on or off.
- Set tone: Piriricic
- Off sound: Piric
Open the door in outdoor
Method 1
Open the door by password
1. Enter password 2. Press [*]button
Touch the outdoor
license plate to turn
on the LED and
enter the registered
password.
When you press the
[*] button, you will
hear a confirmation
tone and then open
when you open
the door.
How to set auto lock, manual lock
Make sure to turn off the Mortise Square Lock on the indoor body.
1. Enter password 2. Press [#]button
Touch the outdoor
license plate to turn
on the LED and
enter the registered
password.
3. Press [4] or [7]button and press registration button
Auto lock setting: Press the [4] button and press the register
button to set the auto lock function after a confirmation
tone sounds.
Manual lock setting: After pressing the [7] button and pressing
the register button, the manual lock function is set after a tone
is heard.
Press the [#] button
twice in succession
COMMAX Co., Ltd.
Thank you for purchasing COMMAX products.
Before you use, please read this manual
and use correctly. COMMAX is
not responsible for any safety
accident due to abnormal
operation of the products.
Warning for Safety
These warnings are to secure user’s safety and prevent the possible loss of property.
Please read carefully below to use the product in a correct manner.
Sort Using frequency
Number of
channels
Modulation
format
Antenna power
RFID 13.56Mhz 1 ASK 93.5dBu/under m@ 10m
Wireless devices for
afety systems
(optional)
447.275Mhz 1 FSK 10mW/under
Outbody
Inbody
Mortise & Stricker(Option1) Screw
Installation
instruction
User manual
Big Mortise & Stricker(Option2)
8 Batteries
Construction diagram
4 Smart key
2 Emergency
(Key formula only)
Outdoor shaft
How to register Smart key
When registering or re-registering a smart key, you must register
all the smart keys you have at once. Also registered smart keys are
door lock only. It may not work when used with other products.
How to register and change password
Be sure to register your password with the door open.
3. Enter new password
After entering the new password(4~12 digits),
press * button and the confirmation tone sounds
and registration is completed. Press the * button
once more to end registration.
1. If you register a new password, the existing password
will be automatically deleted.
2. Do not use consecutive numbers when registering your
password.
Cautions
1. Press
[registration] button
2. Press [1]button in the number
plate of outdoor side
Beep
Open the battery cover and
press [registration]button
1. When adding the password, repeat the above item 3
before the number plate lamp turns off.
2. Up to 4 password can be registered
Reference
No Name Specifications
1 Battery cover
This cover protects the batteries and the registration
button.
2 Interlocking pack Receive (CDL-447, optional)
3 Registration button It is used to register or change password or smart key
4 Mortise
It is attached to the side of the door and closes or locks the
door.
5
Dead bolt
(Square locking type)
It locks the door by locking it on the door frame.
6 Latch bolt It serves to keep the door shaken
7 Alkal
ina AA battery It is a power source that operates the door lock.
8 Double lock button
It can be used to lock the door so that it can not be opened
outside,such as during nighttime hours that require
attention.
9 Indoor handle It is used to open or close the door indoors.
Indoor Names and Functions
MORTISE TYPE
BIGMORTISE TYPE
1. Press
[registration] button
2. Press [2]button in the number
plate of outdoor side
Beep
Open the battery cover and
press [registration]button
3. Contact smart key to smart key input unit
If you touch the smart key to be registered one by one,
you will hear a confirmation sound every time you touch it.
Registration is completed by clicking the [Registration]
button on the indoor side body.
1. When registering a new smart key, the existing smart
key is automatically deleted.
Reference
Cautions
1. When adding the password, please repeat the above
item 3 before the [License plate lamp] turns off.
2. Up to 30 smart keys can be registered.
How to register the linker (optional)
1. You can register up to 5 interlocks.
2. Repeat step 3 when registering the linker.
Reference
3. Press the [Register] or [OP / CL] button on the linker
After pressing the front door button of the wall pad(video phone),
press the [Registration] or [OP / CL] button of the interlocker
when the standby mode is canceled.
How to delete smart key, linker
2. Press number in the number plate
3. Press #button
Press and hold the [#] button for 5 seconds to delete
the registered smart key or interlock.
1. Press
[registration] button
2. Press [3]button in the number
plate of outdoor side
Beep
Open the battery cover and
press [registration]button
- Smart key deletion: No 7 button
- Deleting the interlock: No 8 button
1. Press
[registration] button
Beep
Open the battery cover and
press [registration]button
9V emergency battery
(Separate purchase)
Sort Specifications
Password 4-12 digits (Up to 4 can be registered)
RF key It can register within 30
Wallpad interlock Optional (CDL-447)
Rated voltage DC 6V LR6 1.5V AA sized alkaline batteries 8
Emergency power DC 9V Alkaline batteries 8 (Separate purchase)
High temperature sensing Temperature sensor type 60+-10 dgrees
Out body AL,ZN,ABS,PC
In body AL,ZN,ABS,PC
Opening method
Type of product
CDL-200LSNF(Fire-proof, temperature-sensitive form, non-key, primary keylock / F-T-NK-M)
CDL-200LSKF(Fire-proof, temperature-sensitive form, key primary keylock / F-T-K-M)
material
No Name Specifications
1 Name board Enter the number when registering or changing password.
2 Battery warning light Turns on with an audible alarm at low voltage.
3 Smart key input unit
It is the place where smart keys are recognized to open
the door. You can open the door by registering the smart
key or touching the registered smart key.
4 Emergency hole Key formula only (CDL-200LSKF)
5 Outdoor handle It is Used to
open or close doors from outdoors.
6 Emergency power terminal
In case the battery is completely discharged, you can use
9V battery then, the power will be on.
Try 5 times
in a row??
Anti-mischief alert and 1 minute pause
Deadbolt Jam alert
Volume Adjustment
Deadbolt of indoor unit must be come out from mortise before setting
How to
1. Input Password 2. Press [#] button
When LED lights on
after touching
number plate,
input registered
password
3. Press [3] or [6] to adjust volume
[3] for volume up
[6] for volume down
1. Available total 8 levels of volume sound
2. If sound pause mode, numbers are only flicking
without sound
Reference
1. To deactivate alert sound, open the door from indoor body
handle
2. If mechanical key is available, deactivate alert sound by key
Reference
If unregistered [password], [smartkey] keeps used more than 5 times
continuously, freeze operation for 1 minute with alert sound.
When deadbolt is jammed during door
open/close, alert sound of
bee bee bee bee” rings 3 times.
1.If no sound deactivation or door lock malfunction,
product installed position has to be adjusted.
Please contact your local installer or service provider.
Caution
Door Open Alert during automatic lock setting
Battery Replacement Alert
1. Lifetime of battery can be varied according to
manufacturers, date of production, working condition.
(Expected lifetime : 10 months assuming no wireless
operation, AA type alkaline 8ea, 10 times per one day use)
2. If battery liquid leaks out, product can be damaged.
Regular checking is recommended every 6 months.
3. Battery lifetime might be shortened if wireless module
is activated.
Caution
If battery alert light is on on number plate or beep sounds ring, battery has to
be replaced. All batteries must be replaced with new one at once.
To inform door open status during automatics lock
setting, alert sound rings 2 times with each 15 seconds
interval if door opened.
Dual authentication / Registration authentication setting
1. Input password 2. Press [#] button twice,
press [1] or [8] button.
Touch number
plate. When LED
lights on, input
registered
password
3. Press [Regist.] button.
Once press [Regist.] button on outdoor body,
Dual authentication or registration authentication
mode is on or off.
Active: Sound - Piriricic
Deactive: Sound - Piric
[1] : Dual authentication
[8] : Registration
authentication
1. If dual authentication mode is activated, Password +
Card should be confirmed to open to door.
(door open by BLE keeps available.)
2. If registration authentication mode is activated,
first authentication by existing password should be done
for the next step.
* No dual authentication / registration authentication is
activated if factory setting.
* To deactivate dual authentication / registration
authentication, repeat the same procedure for activation
Reference
Beep
Open the battery cover and
press [registration]button
Burglar Alert
If door to be opened by abnormal operation such
as door gap break through, burglar alert rings
with more than 80db noisy sound.
How to deactivate burglar or temperature alert
Remove batteries or [password + *] , [smartkey touch]
if temperature is too high, no deactivation.
Deactivation from outdoor unit
1. Input Password 2. Press [#], [9] button
Press [#] then press [9],
indoor dual lock is off
with beep sound
Summary of how to use
Self-Diagnosis Table by each LED number flicking
To see the status of product by means of checking flicking number
Factory Reset Mode
1.All settings back to the default after factory reset
Caution
1. Press
[Registration] button.
2. Input “123578951” when
number plate lights on
BEEP
Open the battery cover and
press [Registration] button for 5 secs
3. Press [#] button for 2 secs.
Factory default mode is completed with beep sound.
High Temperture Alarm
Once extremely high temperature is detected
(60℃± 10℃), locker is automatically
released to open the door with
huge sound to secure user’s
safety.
9V emergency battery
(sold separately)
Press [Password] and [ * ] to open the door while contacting
terminals of 9V battery to emergency power outlet.
Emergency Power
When door can not be opened due to fully discharged battery.
1. Contact the terminals of 9V battery to emergency power outlet
When door is not opened due to malfunction.
1.Your mechanical key is recommended to be stored
outside of the door for emergency use.
Caution
Emergency Key
Open door with smart key
1. Contact smart key to smart key input unit
When the registered [Smart Key] is touched to the
smart key input part, a confirmation tone is heard
and it opens when you open the door.
Method 2
Open door by interlocking(Optional)
1. Press the [OP/CL] button on the interlock
Press the [OP / CL] button on the interlock to
open the door.
Method 3
Door locking in indoor and outdoor
1. When you press [double lock] button in manual lock
mode, you will hear a "beep" buzzer sound when the door
is locked and inform you that the door is lockedv.
Reference
Set lock Indoor Outdoor
Auto lock
Automatically locked after
2 seconds after
Locked automatically after 2
seconds after door closes
Manual lock
Press the [double lock] button
on the indoor side body
Touch the number plate
during 2 secods
Internal double lock setting
Setting
How to release internal
It is a function that can not open a door with a password or a smart
key outside the door.
1. While the door is locked, press and hold the [double lock]
button for 3 seconds
If you press and hold the [DUAL LOCK] button for
3 seconds, the setting is completed with "OK" sound.
Sound Pause Mode
Sound is back to the original volume if pause mode is
operated once
Reference
Temporary silence function (1 time) regardless latest volume setting
How to
1. Touch number plate and press [#]
2. Press [*] after password or, contact Card to open the door.
ACTION SELF-DIAGNOSIS
Flicking ALL LEDs -Anti-mischief alert and 1 minute pause
Flicking LED number 2 -Error on password, card set
Flicking LED number 3
- Full of registered password, card
Flicking LED number 4 - Deadbolt Jam
Flicking LED number 5 - Burglar Alert
Flicking LED number 6 - Unregistered password, card
Flicking LED number 7 - Already registered address
Flicking LED number 8 - Fire Alarm
Flicking LED
number 9 - Dual lock from Indoor unit
Flicking LED number 0
Touch number
plate. When LED
lights on, input
registered
password
Open the cover on the handle of the outdoor body
If you insert the emergency key and turn to the left or right
You can release the lock status.
Function Default
Password change 1234
[Registration] button ⇒ [1] button ⇒ Password to register⇒ [*] button⇒ [*] button
Card registration None
[Registration] button ⇒ [2] button ⇒ Card (tag) recognition
(Continuous registration) ⇒ [Registration] button
Delete all card
[Registration] button ⇒ [7] button ⇒ [#] button More than 5 seconds
Interlocking registration None
[Registration] button ⇒ [3] button ⇒ Remote cont
rol [OP / CL]
⇒ [Registration] button
Delete the all interlocking
[Registration] button ⇒ [8] button ⇒ [#] button More than
5 seconds
Open the door indoors
Door lock handle: Push the manual opening / closing device towards the door.
Auto lock: Auto lock when the door is closed
Manual Locking: Press the [Internal Dual Locking] button
Password: LED of window number LED ON ⇒ Enter password ⇒ Press [*] button
Card: Card contact with card recognition
Emergency key: Rotate after inserting emergency key into Emergency key insertion part
Auto lock: Auto lock when the door is closed
Manual locking: Touch the license plate of the window for 2seconods
Auto lock setting
Enter the password ⇒ Press the [#] [#] button ⇒ Press the [4] button ⇒
Press the [
Registration
] button
Manual lock setting
Enter the password ⇒ Press
the [#] [#] button ⇒ Press the [7] button ⇒
Press the [
Registration
] button
Enter the password ⇒ Press the [#] [#] button ⇒ Press the [1] button
(Individual authentication / Dual authentication)
⇒ Click the [
Registration
] button
Enter the password ⇒ Press the [#] [#] button ⇒ Press the [8] button
(General registration / double registration)
⇒ Click the [
Registration
] button
Enter the password ⇒ Press the
[#] [#] button ⇒ Press the [0] button ⇒
Press the [
Registration
] button
Set sound (beep sound), release sound (beep sound)
Internal dual lock LED setting Release
Enter the password ⇒ Press the [#] [#] button ⇒ Press the [5] button ⇒
Press the [
Registration
] (On/Off)
Internal force lock setting Press and hold the [Internal force lock] button for 3 seconds
Indoors: manual opening and closing with door open a
nd door closing
Outdoors: Enter the password ⇒ Press the [#] button ⇒ Press the [9] button
Etiquette mode function Normal mode Password: Press [#] button ⇒ Enter password ⇒ Press [*] button
Treble: Enter password ⇒ Press [#] button ⇒ Press [3] button
Bass: Input password ⇒ Press [#] button ⇒ Press [6] button
Indoor: When battery is removed
Outdoors: Password, card authentication
Buzzer volume setting
Releas
e alram sound
Set registration
authenitication mode
Release
3D touch authenitication mode Release
Release internal force lock
Close the door indoors
Open the door outdoors
Close the door outdoors
Automatic
locking
Set dual
authenitication mode
Release
2. Press the [double lock]
button inside and dismiss
1. Open the door by releasing
the knob inside and releasing it
  • Page 1 1
  • Page 2 2

Commax CDL-200L Owner's manual

Commax
Brand
Commax
Model
CDL-200L
Type
Owner's manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents