Gardena 19031 User manual

Brand: Gardena

Model: 19031

Type: User manual

Gardena 19031 smart Water Control is a device that automates watering in your garden. It connects to the GARDENA smart Gateway and can be controlled remotely via the GARDENA smart system app. The app allows you to set watering schedules, monitor water usage, and receive alerts if there are any issues with your watering system. The Water Control is suitable for outdoor use and can be used with sprinklers, drip irrigation systems, or other watering devices. It operates on 3 AA batteries and has a battery life of approximately 6 months.

EN Operator’s manual

smart Water Control

Art. 19031

GARDENA smart Water Control

1. SAFETY ................................................ 4

2. FUNCTION .............................................. 6

3. INITIAL OPERATION ....................................... 8

4. OPERATION ............................................. 11

5. MAINTENANCE .......................................... 14

6. STORAGE .............................................. 15

7. TROUBLESHOOTING ..................................... 16

8. TECHNICAL DATA ........................................ 17

9. ACCESSORIES .......................................... 18

10. SERVICE / WARRANTY ..................................... 19

Translation of the original instructions.

For safety reasons, children and young people under 16 as well as

anyone who is not familiar with these operating instructions should not

use the product. Persons with reduced physical or mental abilities

may use the product only if they are supervised or instructed by a responsible

person. Children must be supervised to ensure that they do not play with

the product. Never operate the product when you are tired, ill or under the

influence of alcohol, drugs or medicine.

Intended use:

The GARDENA smart Water Control is intended for private use in

domestic and hobby gardens, exclusively for outdoor use, to control

sprinklers and watering systems. The smart Water Control can be

used for automatic watering during holidays.

The smart Water Control can only be programmed together with the

GARDENA smart Gateway.

DANGER! Risk of injury!

The GARDENA smart Water Control must not be used

for industrial purposes or in conjunction with chemicals,

foodstuffs, easily flammable and explosive materials.

1. SAFETY

Important!

Read the operator’s manual

carefully before use and keep

for future reference.

DANGER!

Risk of suffocation!

Small parts can be easily swal-

lowed. There is also a risk that

the polybag can suffocate tod-

dlers. Keep toddlers away when

you assemble the product.

DANGER! Cardiac arrest!

This product makes an electro-

magnetic field while it operates.

This field may under some con-

ditions interfere with active or

passive medical implants.

To decrease the risk of condi-

tions that can possibly injure or

kill, we recommend persons

with medical implants to speak

with their physician and the

medical implant manufacturer

before you operate the product.

The product can be used in the

temperature range + 5 °C – + 50 °C

outdoors.

Examine the product for damage

prior to every commissioning.

Keep damaged parts out of the

reach of children.

Regularly examine the batteries

for damage.

Do not use damaged batteries.

Ensure that they are correctly dis-

posed of (please see Chapter

6. STORAGE “Disposal / Disposing

of flat batteries”).

Keep damaged batteries out of the

reach of children.

Do not use the Water Control in

explosive areas.

Examine the product for leaks prior

to every commissioning.

The product will become hot when

exposed to sunlight. Touching the

product in such a condition can

result in slight burns if touched.

Ensure that the product is only

used within the stated temperature

range (see Chapter 1. SAFETY:

+ 5 °C – + 50 °C) .

Batteries:

To ensure the Water Control runs

safely, only 3 x alkalimanganese

(alkaline) batteries type LR6 (AA)

(Mignon) must be used for the

authorizedtemper ature range

+ 5 °C – + 50 °C.

DANGER!

There is a risk of explosion if

batteries are not replaced in the

proper manner. See 6. STORAGE

for information on how to dispose

of used batteries.

Do not use re-chargeable batteries.

In order to stop the Water Control

from failing because of a weak

battery if you are away for a long

time, the battery must be replaced

when the battery display flashes

yellow.

The batteries should not be removed

while watering (leads to continuous

watering).

Setting up:

CAUTION!

The Water Control must not be

used indoors.

v Only use the Water Control

outdoors.

The Water Control may only be set

up vertically with the sleeve nut to

the top to prevent water penetrating

into the battery compartment.

The minimum water output to ensure

that the Water Control functions

correctly is 20 – 30 l/h. For example,

at least 10 – 15 x 2-litre Drip Heads

are required to control the Micro-

Drip-System.

The max. temperature for the water

flow is 40 °C.

v Only use clear fresh water.

The minimum operating pressure

is 0.5 bar, the maximum operating

pressure is 12 bar.

Avoid tensile strain.

v Do not pull the hose connected

to the Water Computer.

2. FUNCTION

Water Control:

The Water Control is controlled automatically with the GARDENA smart

system App. Sprinklers, a sprinkler system or a drip head watering system

can be used for watering.

The Water Control carries out watering fully automatically according to the set

program and can therefore also be used during holidays. Early in the morning

or late in the evening, evaporation and therefore water consumption is lowest.

Controls / Display:

Connection-LED:

Green flashing: While connecting

Green for 10 sec: Signal strength high

Yellow for 10 sec: Signal strength medium

Red for 10 sec: Signal strength low

LED Active watering:

Green for 10 sec.

LED Battery display:

Green for 20 sec: Capacity > 4 weeks

Yellow flashing: Capacity < 4 weeks

Red flashing: Capacity < 2 weeks

Red lightning: battery flat

If the LED lights red, the valve is no longer opened. A valve opened by

the program will also close again if the battery is flat. The battery display

is reset when the batteries are changed.

v Replace batteries (see 3. INITIAL OPERATION “To insert batteries”).

Man. Button:

For switching the water throughput on or off manually.

3. INITIAL OPERATION

To insert batteries:

The batteries are not included in the scope of delivery.

The Water Control must only be operated with 3 x alkalimanganese (alkaline)

batteries type LR6 (AA) (Mignon).

The operating period is approx. 6 months. The operating period can vary

depending on ambient temperature and transmission frequency.

CAUTION!

Rechargeable batteries should not be used!

1. Press the tab

and open the cover

2. Remove the battery holder

3. Insert batteries into the battery holder

. In doing so, ensure

that the polarity

is correct.

4. Push the battery holder

back into the battery compartment.

5. Close the cover

To connect the Water Control:

The Water Control is fitted with a sleeve nut

for taps with (G 1") (33.3 mm)

thread. The adaptor supplied

allows the Water Control to be connected to

taps with a (G 3/4") (26.5 mm) thread.

1. For tap with a G 3/4" (26.5 mm) thread:

Screw adaptor

on to the tap manually (do not use pliers).

2. Screw sleeve nut

of the Water Control on to the adaptor thread

by hand (do not use pliers).

3. Screw tap connector

on to the Water Control.

To fit anti-theft device (optional):

To secure your Water Control against theft, you can obtain

the GARDENA Anti-theft device Art. 1815-00.791.00 from

GARDENA Service.

1. Screw clamp

with screw

firmly to the back of the Water Control.

2. Use clamp

e.g. for fixing a chain.

It is no longer possible to remove the screw after it has been

screwed in.

4. OPERATION

Operation with the GARDENA smart system App:

You can use the GARDENA smart system app to control all smart

system products from anywhere at any time. You can download the free

GARDENA smart system app from the Apple App Store or from the

Google Play Store.

In order to include, a GARDENA smart Gateway with internet connectivity

is needed. All GARDENA smart products are integrated via the app. Follow the

instructions inside the App.

Settings of the Water Control:

– According to the timings in the smart system App:

Watering days, start, duration

– As required in the smart system App:

Start and finish

– Manual operation at the water control

Factory Reset:

The smart Water Control will be reset to the factory settings.

v Push the Reset key

for a short time.

New connection.

– or –

v Push and hold down the Reset key

for at least 5 seconds.

Cancels the existing connection and allows a new connection

to be established, e. g. different Gateway.

Manual operation by Water Control:

The valve can be opened or closed manually at any time (manual watering

is only not possible during integration mode). A program- controlled open

valve can also be closed early without changing the program data.

1. Press Man.-button

to open the valve manually (or to close an

open valve).

The LED Active Watering

is lighting green for 10 sec.

2. Press Man.-button to close the valve early.

If the Water Control is in “Sleep Mode”, press the Man.-button 2 times.

The watering duration (0 to 59 min.) is according to the parameter

of the GARDENA smart system App.

If a program-controlled watering has been stopped manually, this program-

controlled watering cannot start again.

If the valve has been opened manually and a programmed start of a watering

period overlaps the manual opening period, the programmed starting time is

suppressed.

Example:

The valve is opened at 9.00 a.m. manually, the opening period is 30 minutes.

A program with a start time (START) between 9.00 and 9.30 a.m. will not be

undertaken in this case.

5. MAINTENANCE

To clean the filter:

The filter

should be checked regularly and cleaned when necessary.

1. Unscrew sleeve nut

of the Water Control by hand from the tap thread

(do not use pliers).

2. If necessary unscrew the adaptor

3. Remove filter

from sleeve nut

and clean.

4. Fit the Water Control again (see 3. INITIAL OPERATION

“To connect the Water Control” ).

To clean Water Control:

No caustic / abrasive cleaning agents should be used.

v Clean Water Control with a damp cloth (do not use solvent).

6. STORAGE

To put into storage:

The product must be stored away from children.

1. To preserve the batteries, these should be removed

(see 3. INITIAL OPERATION).

2. Stow the Water Control in a dry area where it has protection from frost.

Disposal:

(in accordance with RL2012/19/EC)

The product must not be disposed of to normal household waste.

It must be disposed of in line with local environmental regulations.

IMPORTANT!

Dispose of the product through or via your municipal recycling collection

centre.

Disposing of flat batteries:

Please return flat batteries to a GARDENA dealer or dispose of them

properly at your nearest recycling centre.

Only dispose of batteries when they are flat.

7. TROUBLESHOOTING

Problem Possible Cause Remedy

No LED-display

appears

Batteries inserted

incorrectly.

v Check polarity markings

match (+ / –).

Flat batteries. v Insert new (alkaline)

batteries.

Manual watering is

not possible using the

Man. button

Water Control in Sleep

Mode.

v Press Man. button.

Batteries flat (LED Batterie

display lights red).

v Insert new (alkaline)

batteries.

Tap turned off. v Turn tap on.

Watering program

is not being undertaken

(no watering)

Valve was opened

manually previously.

v Avoid possible program

overlaps.

Tap turned off. v Turn tap on.

Batteries flat (LED Batterie

display lights red).

v Insert new (alkaline)

batteries.

Water Control does

not close

Minimum quantity of water

drawn is less than 20 l/h.

v Connect more drip heads.

NOTE: For any other malfunctions please contact the

GARDENA service department. Repairs must only be done

by GARDENA service departments or specialist dealers

approved by GARDENA.

8. TECHNICAL DATA

smart Water Control Unit Value (Art. 19031-20)

Operation temperature range

(outdoors)

°C 5 – 50

SRD:

Frequency range MHz 863 – 870

Maximum power mW 25

Free field radio range

(approx.)

m 100

Min. / max. operating pressure bar 0.5 / 12

Flow medium clear fresh water

Max. liquid temperature °C 40

Batteries required

3 x alkalimanganese (alkaline)

batteries type LR6 (AA) Mignon

Operating time of the batteries

approx. 6 months with alkaline

batteries (min. 2000 mAh)

EC Declaration of Conformity:

Hereby, GARDENA Manufacturing GmbH declares that the radio equipment

type (Art. 19031) is in compliance with directive 2014/53/EU.

The full text of the EC declaration of conformity is available at the following

internet address:

http://www.gardena.com/int/support/safety-regulations

9. ACCESSORIES

GARDENA Anti-theft device Art. 1815-00.791.00

(from GARDENA Service)

10. SERVICE / WARRANTY

Service:

Please contact the address on the back page.

Warranty statement:

In the event of a warranty claim, no charge is levied to you for the services

provided.

GARDENA Manufacturing GmbH grants a warranty for all original GARDENA

new products for two years from the date of original purchase from the retailer,

provided that the devices have been for private use only. This manufacturer’s

warranty does not apply to products acquired second hand. This warranty

includes all significant defects of the product that can be proved to be material

or manufacturing faults. This war ranty is fulfilled by supplying afully functional

replacement product or by repairing the faulty product sent to us free of

charge; we reserve the right to choose between these options. This service

is subject to the following provisions:

• The product has been used for its intended purpose as per the recommen-

dations in the operating instructions.

• Neither the purchaser nor a third party has attempted to open or repair the

product.

• Only Original GARDENA replacement parts and wear parts have been used

for operation.

• Presentation of the receipt.

Normal wear and tear of parts and components (such as blades, blade fixing

parts, turbines, light bulbs, V-belts / toothed belts, impellers, air filters, spark

plugs), visual changes, wear parts and consumables are excluded from the

warranty.

This manufacturer’s warranty is limited to replacement and repair of products

in accordance with the abovementioned conditions. The manufacturer’s war-

ranty does not constitute an entitlement to lodge other claims against us as

amanufacturer, such as for damages. This manufacturer’s warranty does not,

of course, affect statutory and contractual warranty claims against the dealer /

retailer.

The manufacturer’s warranty is governed by the law of the Federal Republic

of Germany.

In case of a warranty claim, please return the faulty product, together with

acopy of the receipt and a description of the fault, with postage paid to the

service address.

Faults which occur as a result of incorrectly installedor leaking batteries are

not covered by the guarantee.

Damage caused by frost is not covered by the warranty.

Product liability:

In accordance with the German Product Liability Act, we hereby expressly

declare that we accept no liability for damage incurred from our products

where said products have not been properly repaired by a GARDENA

approved service partner or where original GARDENA parts or parts author-

ised by GARDENA were not used.

Page is loading ...

Gardena 19031 User manual

Gardena 19031 User manual

Related papers

Other documents