Chesterton Connect EN600491 Gauge Installation guide
- Type
- Installation guide
INSTALLATION GUIDE
Chesterton Connect™ Gauge
1Installation
Install provided battery.
Apply thread sealant on the 1/4" NPT threads.
Install the pressure sensor.
WRENCH TIGHTEN 2-3 TURNS PAST FINGER
TIGHT POSITION.
A
B
BATTERY DOOR
BATTERY CR2050
SENSOR BODY
3Device Registration
Download Chesterton Connect™ App
Follow setup instructions in the mobile app.
2
¹Note: Chesterton Connect™ Gateway required for syncing to the Chesterton Connect™ Cloud
²Note: Chesterton Connect™ Cloud account required prior to setup
• Select the Chesterton Connect Gauge to be added to the
Chesterton Connect Cloud
• Enter a name (i.e. location) then select the desired Chesterton
Connect Cloud account and select “Register”.
Sensors
GatewaysSensors
Gauge
Gauge
Cloud Sync
Cloud setup
Not
Registered
C
l
ou
d
S
y
nc
Cloud setu
p
N
ot
R
e
g
istere
d
Registration
Your cloud subscription is
governed by the Terms and
Conditions of the Agreement
between your company and
Chesterton, and this device will
be registered pursuant to that
Agreement.
Cancel Register
Device name (optional)
Select cloud subscription...
Chesterton Connect™ is a trademark of A.W. Chesterton Company. The Bluetooth® word mark and logos are registered trademarks owned
by Bluetooth SIG, Inc. and any use of such marks by A.W. Chesterton is under license. Apple, theApple logois a trademark ofAppleInc.,
registered in the U.S. and other countries. App Store is a service mark of Apple inc. Google Play, the “Android” name, the Android logo, the
“Google play” brand, and other Google trademarks, are property of Google LLC
.
To view Chesterton’s privacy policy please visit: chesterton.com/en-US/Pages/Privacy.aspx
© 2021 A.W. Chesterton Company.
® Registered trademark owned by A.W. Chesterton Company in USA and other countries, unless otherwise noted.
Warnings and Cautions
• Product is intended for use in industrial or commercial environments.
• Before installation, please verify that the product matches its intended
use, especially the pressure ttings and pressure range.
• Chesterton Connect™ Gauge uses a coin cell CR2050 battery. Follow local
laws for proper treatment and disposal of this product and components.
• Disable the product if it is damaged or operates incorrectly.
• Make sure the product is used as specied and within its advertised
operating limits.
• Do not drop the Chesterton Connect™ Gauge product. Dropping the
product may aect its ability to function properly.
• Follow all nearby PPE and equipment safety requirements when
installing, troubleshooting or removing the sensor and its components.
• Ensure the process uid is compatible with the 316L stainless-steel
sensor pressure port.
• Sensitive diaphragm inside. Do not insert
anything into the pressure port or attempt
to clean using compressed air or liquids.
For support visit: connect.support@chesterton.com
Inside USA: 833-677-7343
International: +1 83 367 77343
A.W. Chesterton Company, 860 Salem Street, Groveland, MA 01834 USA
Telephone: 781-438-7000, Fax: 978-469-6528, chesterton.com
Form No. EN600491 Chesterton Connect™ Gauge Installation Guide – English 12/21
-
1
-
2
-
3
-
4
