King Canada XL-049 User manual

Brand: King Canada

Model: XL-049

Type: User manual

ıı

x 24

ıı

MDF TABLE

MODEL: XL-049

BY/PAR:

INSTRUCTION MANUAL

2-YEAR

LIMITED WARRANTY

FOR THISMDF TABLE

KING CANADA TOOLS

OFFERS A 2-YEAR LIMITED WARRANTY

FOR NON-COMMERCIAL USE.

PROOF OF PURCHASE

Please keep your dated proof of purchase for warranty and servicing purposes.

LIMITED TOOL WARRANTY

King Canada makes every effort to ensure that this product meets high quality and durability standards. King Canada warrants to the

original retail consumer a 2-year limited warranty as of the date the product was purchased at retail and that each product is free from

defects in materials. Warranty does not apply to defects due directly or indirectly to misuse, abuse, normal wear and tear, negligence

or accidents, repairs done by an unauthorized service center, alterations and lack of maintenance. King Canada shall in no event be

liable for death, injuries to persons or property or for incidental, special or consequential damages arising from the use of our products.

To take advantage of this limited warranty, return the product at your expense together with your dated proof of purshase to an

authorized King Canada service center. Contact your retailer or visit our web site at www.kingcanada.com for an updated listing of our

authorized service centers. In cooperation with our authorized serviced center, King Canada will either repair or replace the product if

any part or parts covered under this warranty which examination proves to be defective in workmanship or material during the

warranty period.

NOTE TO USER

This instruction manual is meant to serve as a guide only. Specifications and references are subject to change without prior notice.

PARTS DIAGRAM & PARTS LISTS

Refer to the Parts section of the King Canada web site for the most updated parts diagram and parts list.

KING CANADA INC. DORVAL, QUÉBEC, CANADA H9P 2Y4

www.kingcanada.com

ASSEMBLY

& PARTS DIAGRAM/PART LIST

ASSEMBLY

MOUNTING LEVELING SCREWS

1) Install the 10 large wood screws (A) Fig.1 from underneath the table as

shown.

2) The wood screws (A) will act as leveling hardware for the Router Lift

(mod. XL-125) or the Phenolic Router Insert Plate (mod. XL-114).

MOUNTING MDF TABLE TO FLOOR STAND (MOD. XL-085)

1) To prevent damage, place a protective cover on work bench or floor, then

position the MDF Table (A) Fig.2 upside down (facing down) so the

underneath of the table is exposed.

2) Position the completely assembled Floor Stand (mod. XL-085) upside

down onto the table as shown. Make sure the front of the Floor Stand

faces the front of the MDF Table.

3) Align the 14 mounting holes in the Floor Stand with those of the MDF

Table, secure the Floor Stand to the MDF Table using 14 small wood

screws (B).

Note: Additional small wood screws (B) Fig.2 are provided, these are used

to fix the Universal Dust Collection Kit (mod. XL-130) and the Router Fence

(mod. XL-080) to the underside of the MDF table.

Note: 2 countersunk allen head screws (A) Fig.3 are also provided, these

are used to fix the Router Lift (mod. XL-125) or the Phenolic Router Insert

Plate (mod. XL-114) as shown.

FIGURE 1

FIGURE 2

FIGURE 3

King Canada XL-049 User manual

King Canada XL-049 User manual

King Canada XL-049 User manual

Related papers

Other documents