ESAB Feed 304 M12 is a wire feed unit designed for MIG/MAG welding, featuring a sealed design, four-wheel drive wire feed mechanism, and control electronics. It offers precise wire feed speed control, adjustable burnback time, creep start and 2/4 stroke welding modes. The unit is compatible with wire diameters from 0.6 to 1.6 mm and can be used with wire on ESAB's MarathonPac or standard wire bobbins up to 300 mm in diameter (accessory for 440 mm bobbins available).
ESAB Feed 304 M12 is a wire feed unit designed for MIG/MAG welding, featuring a sealed design, four-wheel drive wire feed mechanism, and control electronics. It offers precise wire feed speed control, adjustable burnback time, creep start and 2/4 stroke welding modes. The unit is compatible with wire diameters from 0.6 to 1.6 mm and can be used with wire on ESAB's MarathonPac or standard wire bobbins up to 300 mm in diameter (accessory for 440 mm bobbins available).
ESAB Feed 304 M12 is a wire feed unit designed for MIG/MAG welding, featuring a sealed design, four-wheel drive wire feed mechanism, and control electronics. It offers precise wire feed speed control, adjustable burnback time, creep start and 2/4 stroke welding modes. The unit is compatible with wire diameters from 0.6 to 1.6 mm and can be used with wire on ESAB's MarathonPac or standard wire bobbins up to 300 mm in diameter (accessory for 440 mm bobbins available).
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI