Lexmark GENESIS S815 Setup Manual

Brand: Lexmark

Model: GENESIS S815

Type: Setup Manual

This manual is also suitable for

Genesis S816

Lexmark GENESIS S815 is a high-quality printer designed to meet your home or small office printing needs. With its user-friendly control panel, you can easily set up and operate the printer. It also features a variety of connectivity options, including Wi-Fi, Ethernet, and USB, making it easy to connect to your devices.

Lexmark GENESIS S815 is a high-quality printer designed to meet your home or small office printing needs. With its user-friendly control panel, you can easily set up and operate the printer. It also features a variety of connectivity options, including Wi-Fi, Ethernet, and USB, making it easy to connect to your devices.

1

Unpack printer

Notes:

• Do not attach the USB cable until

prompted to do so.

• Place the printer near the computer

during setup. If you're setting up on

a wireless network, then you may

move the printer after setup is

complete.

• Contents may vary by model and

region.

2

Remove tape and packing material from all areas of the

printer

Lexmark S800 Series Installation

3

Use slider to extend paper guides

4

Load paper

1 Load paper.

2 Adjust the paper guide.

Lexmark S800 Series Installation

5

Extend paper exit tray

1 Pull out the exit tray.

2 Extend the flip-out tray.

6

Connect power cord only

Note: DO NOT attach the USB cable yet.

CAUTION—POTENTIAL INJURY: Read the safety information included with this product before connecting

power or making any cabling connections.

Lexmark S800 Series Installation

7

Make sure printer is on

8

Set language on the printer control panel

After setting the language, touch OK.

9

Confirm language

Touch if the language is correct.

Touch if it is not correct.

Lexmark S800 Series Installation

10

Set country/region

After setting the country/region on the

printer, touch Accept.

11

Set date

After setting the date on the printer, touch

Accept.

12

Set time

After setting the time on the printer, touch

Accept.

Lexmark S800 Series Installation

13

Set time zone

After setting the time zone on the printer,

touch Accept.

14

Open printer

Behind the printhead access door, you'll

find the touch-screen cloth and customer

support label, which contains the

following:

1 Model number

2 MAC address

3 Machine serial number

4 Ink compatibility information

15

First, install each color ink cartridge. Then, use two hands

to install black cartridge

Lexmark S800 Series Installation

16

Close printer

17

From the printer control panel, touch Continue

Notes:

• The alignment page prints.

• Do not remove the page until

printing stops. The alignment page

may take a while to print and will

move in and out during the process.

• Streaks on the alignment page are

normal and not an indication of a

problem.

• The alignment page that prints may

differ from the one shown.

• Recycle the alignment page.

Lexmark S800 Series Installation

1
2
3
4
5
6
7

Lexmark GENESIS S815 Setup Manual

Brand: Lexmark

Model: GENESIS S815

Type: Setup Manual

This manual is also suitable for

Genesis S816

Lexmark GENESIS S815 is a high-quality printer designed to meet your home or small office printing needs. With its user-friendly control panel, you can easily set up and operate the printer. It also features a variety of connectivity options, including Wi-Fi, Ethernet, and USB, making it easy to connect to your devices.

Related papers

Other documents