Navigloo 3510 Assembly Instructions

Brand
Navigloo
Model
3510
Type
Assembly Instructions

The Navigloo 3510 is a versatile and durable pontoon boat designed for a wide range of water activities, from fishing and swimming to camping and cruising. With its sturdy aluminum frame and high-quality polyethylene deck, the Navigloo 3510 can withstand even the most challenging conditions. The boat's spacious interior and comfortable seating make it ideal for families and groups of friends. The Navigloo 3510 also features a number of convenient amenities, such as a built-in cooler, a Bimini top for sun protection, and a swim ladder for easy access to the water.

The Navigloo 3510 is a versatile and durable pontoon boat designed for a wide range of water activities, from fishing and swimming to camping and cruising. With its sturdy aluminum frame and high-quality polyethylene deck, the Navigloo 3510 can withstand even the most challenging conditions. The boat's spacious interior and comfortable seating make it ideal for families and groups of friends. The Navigloo 3510 also features a number of convenient amenities, such as a built-in cooler, a Bimini top for sun protection, and a swim ladder for easy access to the water.

©
NAVIGLOOPONTOONBOATPONTON2324
SUMMARY:KeyPointsofAssemblyInstructions/RÉSUMÉ:Pointsclésdel’assemblage
RÉSUMÉ
!
POINTSCLÉSDEL’ASSEMBLAGE
NAVIGLOOPONTON2324pi
SUMMARY
!
KEYPOINTSOFASSEMBLY
NAVIGLOOPONTOONBOAT2324ft
THE2VERTICALCONNECTORS
WITHOUTBASE
:front&back
LES2EMBRANCHEMENTSVERTICAUX
SANSBASE
:avant&arrière
[10’’24’’]
Leavea10to24inchmaximumoverhangpastthe2verticalsupportposts
withbase(front&back)
sothatthehorizontalbeamremainssecure.
Les2embranchementsverticauxsansbase(avant&arrière)doiventêtre
installésàchacunedesextrémitésdel’armatureàunedistancede10à24
poucesmaximumdespoteauxdesoutienavecbase(avantetarrière)afin
d’assurerlastabilitédelapoutrehorizontale.
Page9
Makesurethateachextremity(frontandback)endsata±90°angle
.
Les2embranchementsverticauxsansbase(avantetarrière)doiventformer
unanglede±90°aveclapoutrehorizontale.
Page10
THE5VERTICALSUPPORTPOSTS
LES5POTEAUXDESOUTIENVERTICAUX
Metalpins(K)mustONLYbeinstalledonthe5verticalsupportposts
.
Lesgoupillesdemétal(K)doiventêtreposéesUNIQUEMENTsurles5poteauxdesoutienverticaux.
Pages6,12
Carabiners(G1)ofthestrapsmustONLYbeinstalledontheCCLIPS(C)securingthe5verticalsupport
posts.
Lesmousquetons(G1)dessanglesdoiventêtresinstallésUNIQUEMENTsurlesCCLIPS(C)des5poteauxde
soutienverticaux.
Pages7,13
Itisimportantthatthehorizontalbeambelevelledasmuchaspossible.Adjusttheverticalposts
accordingly.
Ilestimportantquelapoutrehorizontalesoit,lepluspossible,deniveau.Ajusterlespoteauxverticauxen
conséquence.
Pages6,12

78’’
Theverticalsupportpostsrequireaheightof78inches.Itisrecommendedthatthisheightbemaintained
toensuregreaterframestabilityandachievetheproperpitchtoallowsnowtoslideoff.
Lespoteauxdesoutienverticauxdoiventavoirunehauteurde78pouces.Ilestrecommandédemaintenir
cettehauteurafind’assurerunmaximumderobustesseàl’armatureetd’obtenirlameilleurepente
possiblepourquelaneiges’écoule.
Pages6
Thedistancebetweenthe5verticalsupportpostsmustbemoreorlessequalinordertohavegreater
stability(theyarethe5pillarsoftheframe)
.
L’espaceentreles5poteauxdesoutienverticauxdoitêtrelepluséquilibrépossiblepourassurerunebonne
stabilité(puisqu’ils’agitdes5piliersdel’armature).
Pages12
1
2
[
10’’24’’
]
±90°
±
90°
78’’
K K K K
K
THE5VERTICALSUPPORTPOSTS:THEPILLARSOFTHEFRAME
LES5POTEAUXDESOUTIENVERTICAUX:LESPILIERSDEL’ARMATURE
4
5
3
1/3
©
NAVIGLOOPONTOONBOATPONTON2324
SUMMARY:KeyPointsofAssemblyInstructions/RÉSUMÉ:Pointsclésdel’assemblage
RÉSUMÉ
!
POINTSCLÉSDEL’ASSEMBLAGE
NAVIGLOOPONTON2324pi
SUMMARY
!
KEYPOINTSOFASSEMBLY
NAVIGLOOPONTOONBOAT2324ft
THE7SETSOFLATERALCONNECTORS
LES7PAIRESD’EMBRANCHEMENTSLATÉRAUX
THELATERALCONNECTORS:7SETS
LESEMBRANCHEMENTSLATÉRAUX:7PAIRES
Thespacebetweenthelateralpostsmustbeasequalaspossibletoensuregreaterstabilityandforabetter
weightdistributiononcethetarpaulinison.
L’espaceentrelesembranchementslatérauxdoitêtrelepluséquilibrépossibleafind’assurerunemeilleure
repartitiondeschargeslorsdel’installationdelatoile.
Page16
Foamprotectors(H)mustrestontheedgeofthewatercraftoverhangingtheedgebyabout3inches
.
Lesemboutsdeprotection(H)doivents’appuyersurlereborddel’embarcationetdépasserd’environ
3pouces.
Page17
Foamprotectors(H)mustoverhangtheABpostbyabout2inchesinordertoproperlyprotectthetarpaulin
.
Chaqueemboutdeprotection(H)doitdépasserd’environ2poucesl’embranchementlatéralABpourbien
protégerlatoile.
Page15
Ifallpreviousstepsaretakenintoaccount,theanglefortheslopeshouldbeapproximately50degrees.Itis
preferabletomaintainthisangletohavethebestslopepossibleallowingthesnowtoslideoff.

Enrespectantlesétapesprécédentes,l’angled’inclinaisondesembranchementslatérauxserad’environ
50degrés.Ilestpréférabledemaintenircetangled’inclinaisonafind’assurerlameilleurepentepossiblepour
quelaneiges’écoule.
Page17
OVERLAPINGoftheAandBtubes
CHEVAUCHEMENTdestubesAetB
Foreachofthesesteps,itisimportanttohavea
minimum6inchoverlapoftheAandBtubesin
ordertohavethebestsecuritypossible.
Pourchacunedecesétapes,ilestimportant
d’appliquerunminimumde6poucesde
chevauchementdestubesAetBafind’avoirune
soliditéaccrue.
Pages6,12
Pages10,16 Page9
50°
3’’
K
J
A
A
B
B
J
A
B
2/3
50°
50
°
©
NAVIGLOOPONTOONBOATPONTON2324
SUMMARY:KeyPointsofAssemblyInstructions/RÉSUMÉ:Pointsclésdel’assemblage
RÉSUMÉ
!
POINTSCLÉSDEL’ASSEMBLAGE
NAVIGLOOPONTON2324pi
SUMMARY
!
KEYPOINTSOFASSEMBLY
NAVIGLOOPONTOONBOAT2324ft

EXTRAPROTECTION
PROTECTIONSSUPPLÉMENTAIRES
Werecommendusingextraprotectivemeasuresforfragilesurfacesthatmaycomeintocontactwiththe
bases,thepostsand/orthestraps.Forexample:placeaswatchofcarpetandapieceofplywoodunderthebases
(ortheposts)toprotectthewatercraft’supholstery.
Nousrecommandonsdeprotégertoutesurfacefragilequiseraencontactaveclesbases,lespoteaux
et/oulessangles.Parexemple:déposezunmorceaudetapisetuneplanchedeboissouslesbases(oulespoteaux)
afindebienprotégerlerevêtementdevotreembarcation.
Page5
Page11
DURINGINSTALLATIONOFTARPAULIN:
•ItisyourresponsibilitytopreventtheNaviglootarpaulinfromcomingintodirectcontactwithprotrudingcomponentsthatmay
createfriction,whichcouldpotentiallydamageorperforateit.(i.e.snapsforcanvasorBiminitopanchorpoints)*Damagecausedby
unpaddedcomponentsthatwearorperforatethetarpaulinisnotcoveredundertheconditionsofthelimitedwarranty.
•Takeextraprecautionstopreventthegrommetsonthetarpfromdamagingthehullofyourwatercraft.
LORSDEL’INSTALLATIONDELATOILE:
•Ilestdevotreresponsabilitédevousassurerquelatoilenepuisseêtreencontactavectoutecomposantequipourraitendommagerou
perforerlatoileparfrictioncauséeparleventouautre.(Exemples:lesboutonspressiond’unetoilerapide,lespointsd’ancraged’un
toitBimini,etc.)*Lagarantiesurlatoilenecouvrepaslesdommagescauséspartoutecomposantenonprotégéequipourrait
endommagerouperforerlatoile.
•Assurezvousquelesœilletsdelatoilen’abîmerontpasvotreembarcation.
Itisyourresponsibilitytoaddextraprotectiontoyourwatercraftwhennecessary(Example:motorcover,etc.)
_____ ____ ____________________ ____________________ ___ ____________________ _______________________ _______________
Ilestdevotreresponsabilitéd’apporterlesprotectionssupplémentairesquevousjugerezappropriéesàvotreembarcation.

(Exemple:houssedeprotectionpourmoteurhorsbord,etc.)
THESELFLOCKINGSTRAPS
LESSANGLESAUTOBLOQUANTES
Toensureproperassemblyofstraps:ThreadG2throughtheclipattheendofG1fromthe
bottom,thenpullhardfrombothends.G2shouldnotslip;ifitdoes,removeG2,turnthe
clipattheendofG1oversothattheteethofthecliparefacingupward,thenthreadG2
thoughtheclipfromthebottomagain.Testresistancebypullingstrapfrombothends.

WARNING:Asyoupullonbothendsof thestrap,makesurethatG2doesnotslip!Ifit
does,removeG2,turntheclipattheendofG1oversothattheteethoftheclipare
facingupward,thenthreadG2throughtheclipfromthebottomagain.(seeStep1)
S’assurerquelessanglessoientenfiléesdanslebonsens:lapartieG2 doitêtreenfiléedans
lapartieG1demanièreàcequ’ilyaitunerésistancelorsquevoustirezsurles2extrémités
delasangle(G1 etpartielibrede G2).
ATTENTION:Sivousn’arrivezpasàavoirunerésistanceetquelasangleglisse,enlevezla
partieG2,retournezlaetrecommencezdenouveau.(voirÉtape1)
Pages4,8,14
Thetensionintheselflockingstrapsoneachsideoftheverticalsupportpostsmustremaintightand
equaltoensuremaximumstability.
Latensiondessanglesdoitêtreajustéeuniformémentdechaquecôtédespoteauxdesoutienverticaux
afind’assurerunebonnestabilité.
Pages8,14
Ensurethatgatesonthecarabinersareproperlyclosed.

Assurezvousquelesmousquetonssoientbienenclenchés.
Pages8,14
G1
G2
3/3
  • Page 1 1
  • Page 2 2
  • Page 3 3

Navigloo 3510 Assembly Instructions

Brand
Navigloo
Model
3510
Type
Assembly Instructions

The Navigloo 3510 is a versatile and durable pontoon boat designed for a wide range of water activities, from fishing and swimming to camping and cruising. With its sturdy aluminum frame and high-quality polyethylene deck, the Navigloo 3510 can withstand even the most challenging conditions. The boat's spacious interior and comfortable seating make it ideal for families and groups of friends. The Navigloo 3510 also features a number of convenient amenities, such as a built-in cooler, a Bimini top for sun protection, and a swim ladder for easy access to the water.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents