Hytronik HTY01 Tuya enabled HF Motion Sensor Operating instructions
- Type
- Operating instructions
HTY01
ON/OFF CONTROL
Built-in Microwave Motion Sensor with Mesh
Technical Specications
Free smartphone App for
set-up and commissioning
Product Description
HTY01 is a Bluetooth built-in microwave motion sensor with ON/OFF
control. It is designed for professional lighting manufactures who would
like to incorporate wireless control into their luminaires. HTY01 is suitable
for any typical indoor applications such as ofce, classroom, car park,
warehouse and other commercial/industrial areas. With Bluetooth
wireless mesh networking, it makes communication much easier without
any hardwiring, which eventually adds values to luminaires and saves
costs for projects. Meanwhile, simple device setup and commissioning
can be done via app.
* The detection range is heavily inuenced by sensor placement (angle) and different walking paces.
It may be reduced under certain conditions.
Max 4dBm
2.4 GHz - 2.483 GHz
Operation frequency
Transmission power
Range (Typical ) 10~30m
Bluetooth Transceiver
Sensor Data
High Frequency (microwave)Sensor principle
Operation frequency
Detection range
30°
~150°
Detection angle
5.8GHz+/-75MHz
Transmission power 0.2mW
Max installation height 6m
Max detection range 10m (diameter)
Operation temperature
Ta: -20
O
C ~ +50
O
C
Environment
Tc:+75°Case temperature(MAX.)
IP20 IP rating
Draft
Features
Use Tuya smart for commissioning
Grouping luminaires via mesh network
ON/OFF control with load ratings of:
- 300VA (capacitive)
- 400W (resistive)
Compact design
Loop-in and loop-out terminals for efcient installation
Robust HF antenna design wireless interference
Device rmware update over-the-air
5-year warranty
Subject to change without notice. Edition: 05 Jul. 2022 Ver. Draft Page 1/4
Robust HF
Antenna
Stand-by power
Input & Output Characteristics
Operating voltage
<0.5W
20s
Warming-up
220 240VAC 50/60Hz
Load ratings 300VA(capacitive),400W(resistive)
Mechanical Structure & Dimensions
Draft
Draft
Wiring Diagram
Subject to change without notice. Edition: 05 Jul. 2022 Ver. Draft Page 2/4
65
4.1
36.5
71.5
80.4
23.5
11.9
Antenna Module
Daylight Sensor Installation Hole
L’ N N L
control gear
L N
L
L
L’N
N
N
Functions and Features
This sensor is a motion switch, which turns on the light upon detection of motion, and turns off after a pre-selected full light
duration when there is no movement. A daylight sensor is also built in to prevent the light from switching on when there is
sufcient natural light.
With insufcient natural light, the sensor
switches on the light automatically
when presence is detected.
With sufcient natural light, the light
does not switch on when presence is
detected.
The sensor switches off the light
automatically after the full light
duration when there is no motion
detected.
On/off Control
1
Draft
Draft
Subject to change without notice. Edition: 05 Jul. 2022 Ver. Draft Page 3/4
Hytronik Microwave Sensor
(New Robust Antenna)
Other types of wireless sources
(such as Bluetooth, RF etc.)
5G GSM tower5G Router
Anti-interference
Anti-interference
Anti-interference
Robust HF Sensors Design --- Anti-interference Technology
Hytronik’s microwave motion sensor uses 5.8GHz high frequency (HF) antenna in the product design. With the increasing
density of wireless environments such as 5G GSM tower and 5G Wi-Fi coverage, this has created extra challenges for sensor’s
operation because the air is shared by all kinds of wireless signals, and transmissions from any device at the similar frequency
could potentially cause interference. The effects of interference which can be noticed by users are usually false triggering of
sensors (turning on/off erratically), or lights staying on even after hold time etc.
To get around such tough environment, Hytronik has developed a new series of robust HF modules, designed to be loaded
with our own special sophiscated software algorithms. These robust HF modules can withstand different types of wireless
interferences in the real application. We believe this is the ultimate solution towards demanding installation environments in the
future.
Robust HF
Antenna
Highlight
Grouping luminaires via mesh network
1
2
primary
primary
primary
primary
secondary
secondary
secondary
1. Grouping the primary tri-proof light with the secondary tri-proof light with APP setting.
2. When the primary tri-proof light receives Bluetooth signal, it tranmits to the the secondary tri-proof light so the tri-proof lights
switch on at the same time.
*All the settings can be nished on the APP.
Additional Information / Documents
1. Regarding precautions for Bluetooth product installation and operation, please kindly refer to
www.hytronik.com/download/knowledge ->Bluetooth Products - Precautions for Product Installation and Operation
2. Data sheet is subject to change without notice. Please always refer to the most recent release on
www.hytronik.com/products/Bluetooth 5.0 SIG mesh system ->Partnership
3. Regarding Hytronik standard guarantee policy, please refer to
www.hytronik.com/download ->knowledge ->Hytronik Standard Guarantee Policy
Draft
Draft
Subject to change without notice. Edition: 05 Jul. 2022 Ver. Draft Page 4/4
Assembly
Sensor module
Antena module
Do not be shielded by metal objects
Need to install hole
Ceiling mounted detection pattern (m)
Ceiling mounted height(m)
5
0
6
10%
30%
75%
50%
Wall mounted height (m)
Wall mounted detection pattern (m)
8
4
0
10%
30%
75%
50%
Detection Pattern
Placement Guide and Typical Range
Smart Phone to Device Range
6-10m 10m
The smart device with the App installed will have a typical range
of 10m, but varies from device to device. During commissioning,
the installer will need to be in range of the devices when searching
for devices to add to the network.
Once the devices have been added to the network via the App,
the devices will start communicating within the wireless mesh.
This means that once the network is complete, all devices are
accessible from the smart device when in a 20m range of a
single point.
-
1
-
2
-
3
-
4
Hytronik HTY01 Tuya enabled HF Motion Sensor Operating instructions
- Type
- Operating instructions
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Hytronik SAM15 /TY Tuya enabled HF Motion Sensor User manual
-
-
-
-
Hytronik HBP02 User manual
-
Hytronik HBTD8200 Series Operating instructions
-
-
Hytronik HTG01 5.0 Real Time Keeper and Repeater Module Owner's manual
-
-
Hytronik HC005S-BT Built-In Microwave Motion Sensor Owner's manual
