Adlink LEC-IMX8MP Owner's manual

COM-HPC-sIDH User’s Guide PICMG COM-HPC R1.1

LEC-IMX8M Plus

Revision: Rev. 1.1

Date: 2023-06-14

Part Number: 50M-72512-1010

User’s Guide

LEC-iMX8M Plus User’s Guide SGET SMARC R2.1

Revision History

Revision

Description

Date

Author

1.0

Initial release

2023-04-20

CC

1.1

I2C pin info corrected

2023-06-14

CC

LEC-iMX8M Plus User’s Guide SGET SMARC R2.1

Preface

Disclaimer

Information in this document is provided in connection with ADLINK products. No license, express or implied, by estoppel or otherwise, to any

intellectual property rights is granted by this document. Except as provided in ADLINK´s Terms and Conditions of Sale for such products, ADLINK

assumes no liability whatsoever, and ADLINK disclaims any express or implied warranty, relating to sale and/or use of ADLINK products including

liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property

right. If you intend to use ADLINK products in or as medical devices, you are solely responsible for all required regulatory compliance, including, without

limitation, Title 21 of the CFR (US), Directive 2007/47/EC (EU), and ISO 13485 & 14971, if any. ADLINK may make changes to specifications and product

descriptions at any time, without notice.

Environmental Responsibility

ADLINK is committed to fulfil its social responsibility to global environmental preservation through compliance with the European Union's Restriction of

Hazardous Substances (RoHS) directive and Waste Electrical and Electronic Equipment (WEEE) directive. Environmental protection is a top priority for

ADLINK. We have enforced measures to ensure that our products, manufacturing processes, components, and raw materials have as little impact on the

environment as possible. When products are at their end of life, our customers are encouraged to dispose of them in accordance with the product

disposal and/or recovery programs prescribed by their nation or company.

California Proposition 65 Warning: This product can expose you to chemicals including acrylamide, arsenic, benzene, cadmium, Tris(1,3-

dichloro-2-propyl)phosphate (TDCPP), 1,4-Dioxane, formaldehyde, lead, DEHP, styrene, DINP, BBP, PVC, and vinyl materials, which are known to

the State of California to cause cancer, and acrylamide, benzene, cadmium, lead, mercury, phthalates, toluene, DEHP, DIDP, DnHP, DBP, BBP, PVC,

and vinyl materials, which are known to the State of California to cause birth defects or other reproductive harm. For more information go to

www.P65Warnings.ca.gov.

Trademarks

Product names mentioned herein are used for identification purposes only and may be trademarks / registered trademarks of respective companies.

This document contains proprietary information protected by copyright. All rights are reserved. No part of this manual may be reproduced by any

mechanical, electronic, or other means in any form without prior written permission of the manufacturer.

LEC-iMX8M Plus User’s Guide SGET SMARC R2.1

Safety Instructions

For user safety, please read and follow all Instructions, WARNINGs, CAUTIONs, and NOTEs marked in this manual and on the associated equipment

before handling/operating the equipment.

Read these safety instructions carefully.

• Keep this manual for future reference.

• Read the specifications section of this manual for detailed information on the operating environment of this equipment.

• Turn off power and unplug any power cords/cables when installing/mounting or un-installing/removing equipment.

• To avoid electrical shock and/or damage to equipment:

• Keep equipment away from water or liquid sources;

• Keep equipment away from high heat or high humidity;

• Keep equipment properly ventilated (do not block or cover ventilation openings);

• Make sure to use recommended voltage and power source settings;

• Always install and operate equipment near an easily accessible electrical socket outlet;

• Secure the power cord (do not place any object on/over the power cord);

• Only install/attach and operate equipment on stable surfaces and/or recommended mountings;

• If the equipment will not be used for long periods of time, turn off the power source and unplug the equipment.

Conventions

The following conventions may be used throughout this manual, denoting special levels of information

Note: This information adds clarity or specifics to text and illustrations.

Caution: This information indicates the possibility of minor physical injury, component damage, data loss, and/or program corruption.

Warning: This information warns of possible serious physical injury, component damage, data loss, and/or program corruption.

LEC-iMX8M Plus User’s Guide SGET SMARC R2.1

Getting Service

Ask an Expert: https://www.adlinktech.com/en/Askanexpert

ADLINK Technology, Inc.

No. 66, Huaya 1st Rd., Guishan District, Taoyuan City 333411, Taiwan

Tel: +886-3-216-5088

Fax: +886-3-328-5706

Email: service@adlinktech.com

Ampro ADLINK Technology, Inc.

6450 Via Del Oro, San Jose, CA 95119-1208, USA

Tel: +1-408-360-0200

Toll Free: +1-800-966-5200 (USA only)

Fax: +1-408-600-1189

Email: [email protected]m

ADLINK Technology (China) Co., Ltd.

300 Fang Chun Rd., Zhangjiang Hi-Tech Park, Pudong New Area, Shanghai, 201203, China

Tel: +86-21-5132-8988

Fax: +86-21-5132-3588

Email: [email protected]m

ADLINK Technology GmbH

Hans-Thoma-Strasse 11, D-68163 Mannheim, Germany

Tel: +49-621-43214-0

Fax: +49-621 43214-30

Email: [email protected]

Please visit the Contact page at www.adlinktech.com for information on how to contact the ADLINK regional office nearest you.

LEC-iMX8M Plus User’s Guide SGET SMARC R2.1

Table of Contents

Revision History ................................................................................................................................................................................................................................................................................................................ 2

Preface .................................................................................................................................................................................................................................................................................................................................. 3

1. Introduction ................................................................................................................................................................................................................................................................................................................. 9

1.1 LEC-iMX8M Plus ............................................................................................................................................................................................................................................................................................................................. 9

1.2 The SMARC Form Factor ............................................................................................................................................................................................................................................................................................................. 9

2. Specifications ............................................................................................................................................................................................................................................................................................................. 10

2.1 Core System ................................................................................................................................................................................................................................................................................................................................... 10

2.2 Video ................................................................................................................................................................................................................................................................................................................................................ 11

2.3 Audio ................................................................................................................................................................................................................................................................................................................................................ 12

2.4 Dual Ethernet ................................................................................................................................................................................................................................................................................................................................. 12

2.5 1216 M.2 LGA Wi-Fi (optional) ................................................................................................................................................................................................................................................................................................ 13

2.6 Extension Busses .......................................................................................................................................................................................................................................................................................................................... 13

2.7 System Storage ............................................................................................................................................................................................................................................................................................................................. 15

2.8 SEMA® Board Management Controller .............................................................................................................................................................................................................................................................................. 15

2.9 Debug Header ............................................................................................................................................................................................................................................................................................................................... 15

2.10 Boot Modes .................................................................................................................................................................................................................................................................................................................................... 15

2.11 Power ................................................................................................................................................................................................................................................................................................................................................ 16

2.12 Mechanical and Environmental............................................................................................................................................................................................................................................................................................... 16

3. Block Diagram ........................................................................................................................................................................................................................................................................................................... 17

4. Pinout and Signal Descriptions .......................................................................................................................................................................................................................................................................... 18

4.1 Pin Summary .................................................................................................................................................................................................................................................................................................................................. 18

4.2 Signal Terminology Descriptions ........................................................................................................................................................................................................................................................................................... 22

4.3 Signal Description by Function ............................................................................................................................................................................................................................................................................................... 23

4.3.1 The First Display Interface ............................................................................................................................................................................................................................................................................................ 23

4.3.2 Second & Third Display Interfaces ............................................................................................................................................................................................................................................................................ 26

4.3.3 MIPI Camera Support ..................................................................................................................................................................................................................................................................................................... 28

4.3.4 I2S (Audio) .......................................................................................................................................................................................................................................................................................................................... 30

4.3.5 USB Ports ............................................................................................................................................................................................................................................................................................................................ 31

4.3.6 PCIe Ports ........................................................................................................................................................................................................................................................................................................................... 33

4.3.7 SATA Ports .......................................................................................................................................................................................................................................................................................................................... 34

4.3.8 LAN Ports ............................................................................................................................................................................................................................................................................................................................ 35

LEC-iMX8M Plus User’s Guide SGET SMARC R2.1

4.3.9 SDIO ...................................................................................................................................................................................................................................................................................................................................... 37

4.3.10 SPI and ESPI ....................................................................................................................................................................................................................................................................................................................... 38

4.4 General Purpose I2C ................................................................................................................................................................................................................................................................................................................... 40

4.4.1 GPIO ...................................................................................................................................................................................................................................................................................................................................... 41

4.4.2 UART ..................................................................................................................................................................................................................................................................................................................................... 42

4.4.3 CAN Bus .............................................................................................................................................................................................................................................................................................................................. 43

4.4.4 Miscellaneous .................................................................................................................................................................................................................................................................................................................... 43

4.4.5 Power and System Management ............................................................................................................................................................................................................................................................................... 44

4.4.6 DB30 Multipurpose Connector ................................................................................................................................................................................................................................................................................... 45

4.4.7 Boot Select ......................................................................................................................................................................................................................................................................................................................... 46

4.4.8 Power ................................................................................................................................................................................................................................................................................................................................... 47

4.5 SMARC Pin-to-controller Mapping ....................................................................................................................................................................................................................................................................................... 48

5. Software Support ..................................................................................................................................................................................................................................................................................................... 60

5.1 Uboot / Yocto ................................................................................................................................................................................................................................................................................................................................ 60

5.2 Ubuntu ............................................................................................................................................................................................................................................................................................................................................. 60

5.3 Android ............................................................................................................................................................................................................................................................................................................................................ 60

6. Mechanical .................................................................................................................................................................................................................................................................................................................. 61

7. Thermal Solutions .................................................................................................................................................................................................................................................................................................... 62

LEC-iMX8M Plus User’s Guide SGET SMARC R2.1

List of Figures

Figure 1 – Module function diagram ...................................................................................................................................................................................................................................................................... 17

Figure 2 – Module top/botom side pin numbering ......................................................................................................................................................................................................................................... 18

LEC-iMX8M Plus User’s Guide SGET SMARC R2.1

1. Introduction

1.1 LEC-iMX8M Plus

ADLINK LEC-iMX8MP is a SMARC module based on NXP iMX8M Plus (4-core Arm Cortex-A53) processor with an optional Neural Processing Unit (NPU)

operating at up to 2.3 TOPS. It is the first SMARC Revision 2.1 module focusing on machine learning and vision, advanced multimedia, and industrial

IoT, and with high reliability. The module also supports dual-image signal processors and 2x camera inputs for an effective vision system, and is

especially suited for applications such as smart home, smart city, and industrial 4.0.

1.2 The SMARC Form Factor

The SMARC (“Smart Mobility ARChitecture”) is a versatile small form factor Computer on Module definition targeting applications that require low

power and high performance at low costs. Typically under 6W, the modules often utilize ARM and other alternative low-power option CPUs, and are

used in many familiar handheld devices, such as tablet computers and smart phones.

Two module sizes are defined in SMARC: 82 mm x 50 mm and 82 mm x 80 mm.

The module PCBs have 314 edge fingers that mate with a low-profile 314 pin 0.5 mm pitch right angle connector (the connector is sometimes

identified as a 321 pin connector, with 7 pins used by the key).

SMARC modules are used as building blocks for portable and stationary embedded systems. The core CPU and support circuits, including DRAM,

boot flash, power sequencing, CPU power supplies, GBE and a single channel LVDS display transmitter are concentrated on the module. Modules are

used with application-specific carrier boards that implement other features such as audio codecs, touch controllers, wireless devices, etc.

The modular approach allows scalability, faster time to market and upgradability while still maintaining low costs, low power, and small physical size.

SMARC module and carrier specifications are available online at: https://www.sget.org/standards/smarc.html

LEC-iMX8M Plus User’s Guide SGET SMARC R2.1

2. Specifications

2.1 Core System

SoC

NXP iMX8M Plus series, available with standard (0°C to 70°C) or extreme rugged (-40°C to 85°C) operating temperature

• i.MX8M-plus Quad NPU 4x Arm Cortex-A53 at 1.6 to 1.8GHz, 1x Arm Cortex-M7, NPU, GPU, VPU Decode/Encode

• i.MX8M-plus Quad 4x Arm Cortex-A53 at 1.6 to 1.8GHz, 1x Arm Cortex-M7, GPU, VPU Decode/Encode

• i.MX8M-plus QuadLite 4x Arm Cortex-A53 at 1.6 to 1.8GHz, 1x Arm Cortex-M7

L2 Cache

32KB I-cache, 32KB D-cache (A53), 512KB L2 Cache (ECC)

Memory

2/4/8GB LPDDR4 memory down (inline ECC)

Security

• CryptoAuthentication™ Device, Microchip ATECC608A (optional)

• Cryptographic co-processor with secure hardware-based key storage

• Protected storage for up to 16 Keys, certificates or data

• ECDH: FIPS SP800-56A Elliptic Curve Diffie-Hellman

• NIST standard P256 elliptic curve support

• SHA-256 & HMAC hash including off-chip context save/restore

• AES-128: encrypt/decrypt, galois field multiply for GCM

• TPM 2.0 Device, ST Microelectronics ST33HTPH2X32AHD5 (optional)

• Compliant with Trusted Computing Group (TCG) Trusted Platform Module (TPM) Library specifications 2.0, Level 0, Revision 138 and TCG PC Client Specific

TPM Platform Specifications 1.03

• Fault-tolerant firmware loader that keeps the TPM fully functional when the loading process is interrupted (self-recovery)

• SP800-193 compliant for protection, detection, and recovery requirements

LEC-iMX8M Plus User’s Guide SGET SMARC R2.1

2.2 Video

LEC-iMX8M Plus supports 1K-capable HDMI 2.0a, a single/dual channel 24-bit LVDS, and a 4-lane DSI.

GPU Core

Vivante GC7000UL 3D GC520L 2D

GPU/VPU Features

GPU: 2 shaders, OpenGL ES 1.1, 2.9, 3.0, OpenCL 1.2, OpenGL 3.0, and Vulkan, up to 1080p FHD resolutions

VPU : 1080p60 HEVC/H.265, H.264, VP9 Decoder | 1080p60 AVC/H.264/ HEVC/H.265 encoder

NPU (optional)

2.3 TOP/s Neural Network performance

Keyword detect, noise reduction, beamforming, Speech recognition (i.e. Deep Speech 2), Image recognition (i.e. ResNet-50)

HDMI

HDMI 2.0a supporting resolutions up to 1920×1080 at 60Hz

LVDS

LVDS single/dual channel 24-bit at max. 1920×080 at 60Hz

MIPI DSI

DSI 4 lanes at max. 1080p@60fps display output (multiplexed with LVDS signal)

LEC-iMX8M Plus User’s Guide SGET SMARC R2.1

Camera Support

Compatible with MIPI Alliance Interface specification v2.1

2x MIPI-CSI2 camera inputs, 1x 4-lane and 1x 2-lane

2.3 Audio

Supports I2S audio codec interface, audio ADC and DAC (located on carrier)

2.4 Dual Ethernet

Primary LAN

Gigabit Ethernet controller with support for TSN in addition to Energy Efficient Ethernet (EEE), Ethernet AVB, and IEEE 1588

Supports 10/100/1000Mbps data transfer rates, both full-duplex and half-duplex

Secondary LAN

Gigabit Ethernet controller with support for Energy Efficient Ethernet (EEE), Ethernet AVB, and IEEE 1588

Supports 10/100/1000Mbps data transfer rates, both full-duplex and half-duplex

LEC-iMX8M Plus User’s Guide SGET SMARC R2.1

2.5 1216 M.2 LGA Wi-Fi (optional)

Optional Wi-Fi LGA module support

In case of non-populated part, the footprint is still there and visible

Only Azurewave AW-CM276NF has been validated during DVT but other M.2 LGA modules could also be compatible if they use the same standard

interfaces, as listed below

- SDIO0 (main Wi-Fi interface)

- UART1 (main Bluetooth interface)

- PCM ( Bluetooth audio transfer interface )

- Note : AW-CM276F has been pre-certified by Azurewave for several countries and regions, ADLINK can assist in final device certification if

applicable. FCC ID: UAY-W8997-M1216

2.6 Extension Busses

PCIe

2x PCI Express Gen2 x1 interfaces

USB

CT temp 2x USB 3.0/2.0, 3x USB 2.0, 1x USB2.0 OTG

ER temp 1x USB 3.0, 1x USB2.0 OTG

UART

4x UART interface SER0, SER2 (Tx/Rx/CTS/RTS) and SER1, SER3(optional) (Tx/Rx)

7- or 8-bit data words, 1 or 2 stop bits, programmable parity (even, odd, or none)

Programmable baud rates up to 4 Mbps.

LEC-iMX8M Plus User’s Guide SGET SMARC R2.1

CAN bus

2x CAN2.0B only or mixed CAN2.0B and CAN FB mode, data bit rate up to 8 Mbps

SPI

2x SPI

I2S

I2S interface (codec on carrier)

I2C

5x I2C interfaces

Supports 7-bit and 10-bit address mode

Software programmable clock frequency:

• 100 kbit/s in Standard-mode,

• 400 kbit/s in Fast-mode

• 1 Mbit/s in Fast-mode Plus

GPIO

14x GPIO with interrupt

LEC-iMX8M Plus User’s Guide SGET SMARC R2.1

2.7 System Storage

SDIO

1x SDIO (4-bit) compatible up to version 3.0.

eMMC

Soldered on module 16, 32 or 64GB (build option) either standard or -40 to 85oC temperature range

Compatible with eMMC specifications 4.41, 4.51, and 5.0

2.8 SEMA® Board Management Controller

Voltage/current monitoring, boot configuration, logistics and forensic information, flat panel control, watchdog timer

2.9 Debug Header

30-pin multipurpose flat cable connector for use with optional DB-30 debug module

Provides JTAG, BMC access; UART, power test points; diagnostic LEDs, Power, Reset, Boot configuration

2.10 Boot Modes

eMMC and SD card boot modes are supported

LEC-iMX8M Plus User’s Guide SGET SMARC R2.1

2.11 Power

Supply Voltage

4.75V – 5.25V

2.12 Mechanical and Environmental

Form Factor

SGET SMARC Specifications v2.1

Dimension

SMARC small size module, 82mm x 50mm

Operating Temperature

Standard: 0°C to 60°C

Rugged: -40°C to 85°C (optional)

Humidity

5-90% RH operating, non-condensing

5-95% RH storage (and operating with conformal coating)

Shock and Vibration

IEC 60068-2-64 and IEC-60068-2-27, MIL-STD-202 F, Method 213B, Table 213-I,

Condition A and Method 214A, Table 214-I, Condition D

LEC-iMX8M Plus User’s Guide SGET SMARC R2.1

3. Block Diagram

Crypto Auth.

ATEC C608A

P MI C

LVDS0 / DSI0

LVDS1

HDMI

CSI0

CSI1

USB0

USB1

USB2

USB3

USB4

USB5

GbE0

GbE1

PCIeA

PCIeB

CAN0

CAN1

SPI0

SPI1

UART0

UART1

UART2

I2S0

SDIO

I2C_PM

I2C_GP

I2C_LCD

I2C_CAM0

I2C_CAM1

GP IO

NXP

iMX 8M Plus

USB1 2.0 (OTG)

USB2 3.0 (Host)

MIPI CSI 2-lanes

MIPI CSI 4-lanes

LVDS0

DSI0

LVDS1

HDMI 2.0a

USB HUB

2x USB 3.0/2.0

3x USB 2.0

MIPI MUX

PCIe Switch

ECSPI1

ECSPI2

SDHC2

1x PCIe x1

RGMII0

RGMII1

LAN PHY

LPDDR4

x32

eMMC 5.1

Wi-Fi/BT

GPIO

Expander1

LAN PHY

CAN0

CAN1

UART2

UART3

UART4

I2S0

DRAM

SDHC3

UART1

SDIO0

PCM

I2C1

I2C2

I2C3

I2C5

I2C6

GPIO

Expander2

LITE

BMC

TPM RTC PC Ie

CLK

USB configuration for ER parts

USB0 USB2.0/OTG

USB2 USB3.0

No USB HUB

Figure 1 – Module function diagram

LEC-iMX8M Plus User’s Guide SGET SMARC R2.1

4. Pinout and Signal Descriptions

4.1 Pin Summary

The below table is a comprehensible list of all signal pins on the MXM 3 connector in the standard specification SMARC 2.1.

Those signals not supported on LEC-iMX8M plus are strikethrough STRIKETHROUGH

Top Side

P1 P74 P75

Key

P156

Bottom Side

S156 S76 S75

Key

S1

Figure 2 – Module top/botom side pin numbering

LEC-iMX8M Plus User’s Guide SGET SMARC R2.1

P-Pin

Primary (Top) Side

S-Pin

Secondary (Bottom) Side

S1

CSI1_TX+ / I2C_CAM1_CK

P1

SMB_ALERT_1V8#

S2

CSI1_TX- / I2C_CAM1_DAT

P2

GND

S3

GND

P3

CSI1_CK+

S4

RSVD

P4

CSI1_CK-

S5

CSI0_TX- / I2C_CAM0_CK

P5

GBE1_SDP

S6

CAM_MCK

P6

GBE0_SDP

S7

CSI0_TX+ / I2C_CAM0_DAT

P7

CSI1_RX0+

S8

CSI0_CK+

P8

CSI1_RX0-

S9

CSI0_CK-

P9

GND

S10

GND

P10

CSI1_RX1+

S11

CSI0_RX0+

P11

CSI1_RX1-

S12

CSI0_RX0-

P12

GND

S13

GND

P13

CSI1_RX2+

S14

CSI0_RX1+

P14

CSI1_RX2-

S15

CSI0_RX1-

P15

GND

S16

GND

P16

CSI1_RX3+

S17

GBE1_MDI0+

P17

CSI1_RX3-

S18

GBE1_MDI0-

P18

GND

S19

GBE1_LINK100#

P19

GBE0_MDI3-

S20

GBE1_MDI1+

P20

GBE0_MDI3+

S21

GBE1_MDI1-

P21

GBE0_LINK100#

S22

GBE1_LINK1000#

P22

GBE0_LINK1000#

S23

GBE1_MDI2+

P23

GBE0_MDI2-

S24

GBE1_MDI2-

P24

GBE0_MDI2+

S25

GND

P25

GBE0_LINK_ACT#

S26

GBE1_MDI3+

P26

GBE0_MDI1-

S27

GBE1_MDI3-

P27

GBE0_MDI1+

S28

GBE1_CTREF

P28

GBE0_CTREF

S29

PCIE_D_TX+ / SERDES_1_TX+

P29

GBE0_MDI0-

S30

PCIE_D_TX- / SERDES_1_TX-

P30

GBE0_MDI0+

S31

GBE1_LINK_ACT#

P31

SPI0_CS1

S32

PCIE_D_RX+ / SERDES_1_RX+

P32

GND

S33

PCIE_D_RX- / SERDES_1_RX-

P33

SDIO_WP

S34

GND

P34

SDIO_CMD

S35

USB4+

P-Pin

Primary (Top) Side

S-Pin

Secondary (Bottom) Side

P35

SDIO_CD#

S36

USB4-

P36

SDIO_CK

S37

USB3_VBUS_DET

P37

SDIO_PWR_EN

S38

AUDIO_MCK

P38

GND

S39

I2S0_LRCK

P39

SDIO_D0

S40

I2S0_SDOUT

P40

SDIO_D1

S41

I2S0_SDIN

P41

SDIO_D2

S42

I2S0_CK

P42

SDIO_D3

S43

ESPI_ALERT0#

P43

SPI0_CS0#

S44

ESPI_ALERT1#

P44

SPI0_CK

S45

MDIO_CLK

P45

SPI0_DIN

S46

MDIO_DAT

P46

SPI0_DO

S47

GND

P47

GND

S48

I2C_GP_CK

P48

SATA_TX+

S49

I2C_GP_DAT

P49

SATA_TX-

S50

HDA_SYNC / I2S2_LRCK

P50

GND

S51

HDA_SDO / I2S2_SDOUT

P51

SATA_RX+

S52

HDA_SDI / I2S2_SDIN

P52

SATA_RX-

S53

HDA_CK / I2S2_CK

P53

GND

S54

SATA_ACT#

P54

ESPI_CS0# / SPI1_CS0#

S55

USB5_EN_OC

P55

ESPI_CS1# / SPI1_CS1#

S56

ESPI_IO_2

P56

ESPI_CK / SPI1_CK

S57

ESPI_IO_3

P57

ESPI_IO_1 / SPI1_DIN

S58

ESPI_RESET#

P58

ESPI_IO_0 / SPI1_DO

S59

USB5+

P59

GND

S60

USB5-

P60

USB0+

S61

GND

P61

USB0-

S62

USB3_SSTX+

P62

USB0_EN_OC#

S63

USB3_SSTX-

P63

USB0_VBUS_DET

S64

GND

P64

USB0_OTG_ID

S65

USB3_SSRX+

P65

USB1+

S66

USB3_SSRX-

P66

USB1-

S67

GND

P67

USB1_EN_OC#

S68

USB3+

P68

GND

S69

USB3-

P69

USB2+

S70

GND

LEC-iMX8M Plus User’s Guide SGET SMARC R2.1

P-Pin

Primary (Top) Side

S-Pin

Secondary (Bottom) Side

P70

USB2-

S71

USB2_SSTX+

P71

USB2_EN_OC#

S72

USB2_SSTX-

P72

RSVD

S73

GND

P73

RSVD

S74

USB2_SSRX+

P74

USB3_EN_OC#

S75

USB2_SSRX-

Key

P75

PCIE_A_RST#

S76

PCIE_B_RST#

P76

USB4_EN_OC#

S77

PCIE_C_RST#

P77

PCIE_B_CKREQ#

S78

PCIE_C_RX+ / SERDES_2_RX+

P78

PCIE_A_CKREQ#

S79

PCIE_C_RX- / SERDES_2_RX-

P79

GND

S80

GND

P80

PCIE_C_REFCK+

S81

PCIE_C_TX+ / SERDES_2_TX+

P81

PCIE_C_REFCK-

S82

PCIE_C_TX- / SERDES_2_TX-

P82

GND

S83

GND

P83

PCIE_A_REFCK+

S84

PCIE_B_REFCK+

P84

PCIE_A_REFCK-

S85

PCIE_B_REFCK-

P85

GND

S86

GND

P86

PCIE_A_RX+

S87

PCIE_B_RX+

P87

PCIE_A_RX-

S88

PCIE_B_RX-

P88

GND

S89

GND

P89

PCIE_A_TX+

S90

PCIE_B_TX+

P90

PCIE_A_TX-

S91

PCIE_B_TX-

P91

GND

S92

GND

P92

HDMI_D2+ / DP1_LANE0+

S93

DP0_LANE0+

P93

HDMI_D2- / DP1_LANE0-

S94

DP0_LANE0-

P94

GND

S95

DP0_AUX_SEL

P95

HDMI_D1+ / DP1_LANE1+

S96

DP0_LANE1+

P96

HDMI_D1- / DP1_LANE1-

S97

DP0_LANE1-

P97

GND

S98

DP0_HPD

P98

HDMI_D0+ / DP1_LANE2+

S99

DP0_LANE2+

P99

HDMI_D0- / DP1_LANE2-

S100

DP0_LANE2-

P100

GND

S101

GND

P101

HDMI_CK+ / DP1_LANE3+

S102

DP0_LANE3+

P-Pin

Primary (Top) Side

S-Pin

Secondary (Bottom) Side

P102

HDMI_CK- / DP1_LANE3-

S103

DP0_LANE3-

P103

GND

S104

USB3_OTG_ID

P104

HDMI_HPD / DP1_HPD

S105

DP0_AUX+

P105

HDMI_CTRL_CK / DP1_AUX+

S106

DP0_AUX-

P106

HDMI_CTRL_DAT / DP1_AUX-

S107

LCD1_BKLT_EN

P107

DP1_AUX_SEL

S108

LVDS1_CK+/eDP1_AUX+/ DSI1_CLK+

P108

GPIO0 / CAM0_PWR#

S109

LVDS1_CK- / eDP1_AUX- / DSI1_CLK-

P109

GPIO1 / CAM1_PWR#

S110

GND

P110

GPIO2 / CAM0_RST#

S111

LVDS1_0+ / eDP1_TX0+ / DSI1_D0+

P111

GPIO3 / CAM1_RST#

S112

LVDS1_0- / eDP1_TX0- / DSI1_D0-

P112

GPIO4 / HDA_RST#

S113

eDP1_HPD / DSI1_TE

P113

GPIO5 / PWM_OUT

S114

LVDS1_1+ / eDP1_TX1+ / DSI1_D1+

P114

GPIO6 / TACHIN

S115

LVDS1_1- / eDP1_TX1- / DSI1_D1-

P115

GPIO7

S116

LCD1_VDD_EN

P116

GPIO8

S117

LVDS1_2+ / eDP1_TX2+ / DSI1_D2+

P117

GPIO9

S118

LVDS1_2- / eDP1_TX2- / DSI1_D2-

P118

GPIO10

S119

GND

P119

GPIO11

S120

LVDS1_3+ / eDP1_TX3+ / DSI1_D3+

P120

GND

S121

LVDS1_3- / eDP1_TX3- / DSI1_D3-

P121

I2C_PM_CK

S122

LCD1_BKLT_PWM

P122

I2C_PM_DAT

S123

GPIO13

P123

BOOT_SEL0#

S124

GND

P124

BOOT_SEL1#

S125

LVDS0_0+ / eDP0_TX0+ / DSI0_D0+

P125

BOOT_SEL2#

S126

LVDS0_0- / eDP0_TX0- / DSI0_D0-

P126

RESET_OUT#

S127

LCD0_BKLT_EN

P127

RESET_IN#

S128

LVDS0_1+ / eDP0_TX1+ / DSI0_D1+

P128

POWER_BTN#

S129

LVDS0_1- / eDP0_TX1- / DSI0_D1-

P129

SER0_TX

S130

GND

P130

SER0_RX

S131

LVDS0_2+/eDP0_TX2+/ DSI0_D2+

P131

SER0_RTS#

S132

LVDS0_2- / eDP0_TX2- / DSI0_D2-

P132

SER0_CTS#

S133

LCD0_VDD_EN

P133

GND

S134

LVDS0_CK+/eDP0_AUX/ DSI0_CLK+

P134

SER1_TX

S135

LVDS0_CK-/eDP0_AUX- / DSI0_CLK-

P135

SER1_RX

S136

GND

P136

SER2_TX

S137

LVDS0_3+ / eDP0_TX3+ / DSI0_D3+

Page is loading ...

Adlink LEC-IMX8MP Owner's manual

Adlink LEC-IMX8MP Owner's manual

Related papers

Other documents