U-MAN-002-09 © 2010 Toshiba Corporation. Printed in UK 78-010-043-10
*Once the remote control has
been programmed to operate your
equipment.
Refer to page 40 of the User Guide
for more informaton.
Visit www.toshiba.com
to register your product for its 12-month guarantee.
r t
y
Overview of the Remote control Automatic Tuning
Register your Product
Once the unit has powered up, the following menu is displayed. Press the 1. [OK] button to continue.
The Hard drive recorder will now scan and store all available channels. Depending on the quality of 2.
your reception, this may take several minutes. Please be patient and do not press any buttons.
If no channels are found a message is displayed asking you to check your aerial. Confirm that your aerial is
connected correctly and press [OK] to restart automatically tuning.
Once the automatic tuning is complete, a summary screen is displayed.3.
Press 4. [OK] to exit the automatic tuning process.
Congratulations ! The Hard drive recorder is now ready to use.
q
TV - Switches the TV on/into Standby*.
w
DTT - Switches the viewing mode to DTT.
e
HDMI 1 - Switches the viewing mode to HDMI 1.
r
0-9 - Selects channels, enter PIN.
t
AD - Switches Audio Description on or off. Refer to page 16 for more
information.
y
SUB - Displays subtitles (if available).
u
+/− - Adjusts the TV’s volume*.
i
PIP - Enters Picture In Picture mode. Refer to page 21 for more
information.
o
CLOCK - Displays the clock.
1)
GUIDE - Switches the Electronic Programme Guide (EPG) on/off. Refer
to page 18 for more information.
1!
BACK - Returns to the previous level in the menu. Exits EPG, Info and
menu (first level).
1@
LIB - Displays the Library of recorded programmes. Refer to page 29 for
more information.
1#
MENU - Displays/exits the menu.
1$
- Pauses and resumes live TV. Refer to page 25 for more
information. Plays and pauses recordings in the Library.
1%
- Stops playback when viewing recordings.
1^
- Skips back 30 seconds when viewing a recording or watching live
TV. Press and hold to skip to the start when viewing a recording or skip
to the start of the pause buffer when watching live TV.
1&
- Rewinds live TV and recordings. Press repeatedly to increase the
rewind speed.
1*
Coloured buttons - Selects options in digital text/EPG/Channel List/
menu.
1(
- Fast forwards recordings. Press repeatedly to increase the fast
forward speed. When pausing live TV or recordings, press to watch in
slow motion.
2)
- Skips forward 30 seconds when viewing a recording. Press and
hold to skip to the end when viewing a recording.
2!
- Records live TV. Sets highlighted programmes to timer record in the
EPG.
2@
TV INPUT -
Switches between the available TV input modes (eg DTT,
HDMI or AV).*
2#
TIMER - Displays the Timers screen. Refer to page 26 for more
information.
2$
TEXT - Displays digital text (if available).
2%
OK/ / / / - Displays the Channel List/confirms a selection (OK
button). Navigate the EPG/menu/Channel List/Info menu (
/ / /
buttons).
2^
INFO - Displays programme and recording information. Refer to page 20
for more information.
2&
SAVER - Displays the screen saver.
2*
TV/RAD - Switches between Digital TV channels and Digital Radio
channels.
2(
- Turns the TV’s sound on/off*.
3)
Ch. +/ − - Selects the next/previous channel.
3!
- Returns to the previous channel watched. Switches between 4 and
24 hours advance in EPG.
3@
HDMI 2 - Switches the viewing mode to HDMI 2.
3#
USB - Switches the viewing mode to USB.
3$
STB - Switches the Digital TV recorder on/into Standby.
3$
3!
2(
2*
3#
2&
3@
3)
2^
2$
2%
q
r
t
u
y
1)
1#
1%
o
1*
e
1&
i
w
1@
1$
1!
1^
2#
2@
1(
2)
2!