HP Mini User manual

HP Mini

User Guide

Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Development Company, L.P.

Windows is a U.S. registered trademark of

Microsoft Corporation.

The information contained herein is subject

to change without notice. The only

warranties for HP products and services are

set forth in the express warranty statements

accompanying such products and services.

Nothing herein should be construed as

constituting an additional warranty. HP shall

not be liable for technical or editorial errors

or omissions contained herein.

First Edition: October 2008

Document Part Number: 496745-001

Product notice

This user guide describes features that are

common to most models. Some features

may not be available on your computer.

Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Safety warning notice

WARNING! To reduce the possibility of heat-related injuries or of overheating the computer, do not

place the computer directly on your lap or obstruct the computer air vents. Use the computer only on a

hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft

surface, such as pillows or rugs or clothing, to block airflow. Also, do not allow the AC adapter to contact

the skin or a soft surface, such as pillows or rugs or clothing, during operation. The computer and the

AC adapter comply with the user-accessible surface temperature limits defined by the International

Standard for Safety of Information Technology Equipment (IEC 60950).

iii

Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

iv Safety warning notice

Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Table of contents

1 Features

Identifying the hardware ....................................................................................................................... 1

Top components .................................................................................................................. 1

TouchPad ............................................................................................................ 1

Light .................................................................................................................... 2

Keys .................................................................................................................... 3

Front components ................................................................................................................ 3

Right-side components ........................................................................................................ 5

Left-side components .......................................................................................................... 5

Display components ............................................................................................................ 6

Bottom components ............................................................................................................. 7

Wireless antennae ............................................................................................................... 8

Additional hardware components ........................................................................................ 9

Identifying the labels ............................................................................................................................. 9

2 Power management

Setting power options ......................................................................................................................... 11

Using power-saving states ................................................................................................. 11

Initiating and exiting Standby ............................................................................ 11

Initiating and exiting Hibernation ....................................................................... 12

Using power schemes ....................................................................................................... 12

Viewing the current scheme .............................................................................. 12

Selecting a different power scheme .................................................................. 12

Customizing power schemes ............................................................................ 13

Setting password protection upon exiting Standby ............................................................ 13

Using external AC power .................................................................................................................... 13

Connecting the AC adapter ............................................................................................... 14

Using battery power ........................................................................................................................... 14

Displaying the remaining battery charge ........................................................................... 15

Inserting or removing the battery ....................................................................................... 15

Charging a battery ............................................................................................................. 16

Maximizing battery discharge time .................................................................................... 17

Managing low battery levels .............................................................................................. 17

Identifying low battery levels ............................................................................. 17

v

Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Resolving a low battery level ............................................................................. 18

Resolving a low battery level when external power is available ....... 18

Resolving a low battery level when a charged battery is

available ........................................................................................... 18

Resolving a low battery level when no power source is

available ........................................................................................... 18

Resolving a low battery level when the computer cannot exit

Hibernation ....................................................................................... 18

Calibrating a battery ........................................................................................................... 18

Step 1: Fully charge the battery ........................................................................ 18

Step 2: Disable Hibernation and Standby ......................................................... 19

Step 3: Discharge the battery ............................................................................ 19

Step 4: Fully recharge the battery ..................................................................... 20

Step 5: Reenable Hibernation and Standby ...................................................... 20

Conserving battery power .................................................................................................. 20

Storing a battery ................................................................................................................ 20

Disposing of a used battery ............................................................................................... 20

Shutting down the computer ............................................................................................................... 21

3 Internet

Connecting to a wired network ........................................................................................................... 23

Connecting to a wireless network ....................................................................................................... 24

Using wireless devices ...................................................................................................... 24

Identifying wireless and network status icons ................................................... 24

Using the wireless controls ............................................................................... 25

Using the wireless switch .................................................................................. 25

Using a WLAN ................................................................................................................... 25

Setting up a WLAN ............................................................................................ 26

Protecting your WLAN ....................................................................................... 26

Connecting to a WLAN ...................................................................................... 27

Roaming to another network ............................................................................. 28

Using HP Mobile Broadband (select models only) ............................................................ 28

Using Bluetooth wireless devices (select models only) ...................................................................... 29

Bluetooth and Internet Connection Sharing (ICS) ............................................................. 29

4 Multimedia

Multimedia features ............................................................................................................................ 30

Identifying your multimedia components ........................................................................... 30

Adjusting the volume ......................................................................................................... 32

Multimedia software ........................................................................................................................... 33

Using other preinstalled multimedia software .................................................................... 33

Installing multimedia software from the Internet ................................................................ 33

Audio .................................................................................................................................................. 34

Connecting external audio devices .................................................................................... 34

vi

Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Checking your audio functions ........................................................................................... 34

Video .................................................................................................................................................. 35

Connecting an external monitor or projector ...................................................................... 35

Webcam ............................................................................................................................................. 36

5 Security

Protecting the computer ..................................................................................................................... 37

Using passwords ................................................................................................................................ 37

Setting passwords in Windows .......................................................................................... 38

Setting passwords in Setup Utility ..................................................................................... 38

Administrator password ..................................................................................... 39

Managing an administrator password ............................................... 39

Entering an administrator password ................................................. 39

Power-on password .......................................................................................... 39

Managing a power-on password ...................................................... 40

Entering a power-on password ......................................................... 40

Using antivirus software ..................................................................................................................... 41

Using firewall software ....................................................................................................................... 42

Installing critical updates .................................................................................................................... 43

6 Digital cards

Inserting a digital card ........................................................................................................................ 44

Stopping and removing a digital card ................................................................................................. 45

7 USB devices

Using a USB device ........................................................................................................................... 46

Connecting a USB device .................................................................................................. 46

Stopping and removing a USB device ............................................................................... 47

Using the USB SmartDrive (select models only) ................................................................................ 48

Inserting the HP USB Disk-On-Key ................................................................................... 48

Stopping and removing the HP USB Disk-On-Key ............................................................ 48

8 Pointing devices and keyboard

Using pointing devices ....................................................................................................................... 50

Setting pointing device preferences ................................................................................... 50

Using the TouchPad .......................................................................................................... 50

Connecting an external mouse .......................................................................................... 50

Using the keyboard ............................................................................................................................ 50

Using hotkeys .................................................................................................................... 50

Initiating Standby (fn+f1) ................................................................................... 51

Switching the screen image (fn+f2) ................................................................... 52

Decreasing screen brightness (fn+f3) ............................................................... 52

Increasing screen brightness (fn+f4) ................................................................. 52

vii

Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Initiating QuickLock (fn+f6) ................................................................................ 52

Muting speaker sound (fn+f8) ........................................................................... 53

Decreasing speaker sound (fn+f10) .................................................................. 53

Increasing speaker sound (fn+f11) .................................................................... 53

Using keypads .................................................................................................................................... 53

Using the embedded numeric keypad ............................................................................... 53

Enabling and disabling the embedded numeric keypad .................................... 54

Switching key functions on the embedded numeric keypad ............................. 54

Using an optional external numeric keypad ....................................................................... 54

9 Drives

Identifying installed drives .................................................................................................................. 55

Handling drives ................................................................................................................................... 55

Using external drives .......................................................................................................................... 56

Using optional external devices ......................................................................................... 57

10 Memory modules

11 Backup and recovery

Backing up your information ............................................................................................................... 62

When to back up ................................................................................................................ 62

Backup suggestions ........................................................................................................... 62

Performing a recovery ........................................................................................................................ 63

12 Updating software

Updating the BIOS ............................................................................................................................. 65

Determining the BIOS version ........................................................................................... 65

Downloading a BIOS update ............................................................................................. 65

Updating programs and drivers .......................................................................................................... 67

13 Setup Utility

Starting the Setup Utility ..................................................................................................................... 68

Using the Setup Utility ........................................................................................................................ 68

Changing the language of the Setup Utility ....................................................................... 68

Navigating and selecting in the Setup Utility ...................................................................... 68

Displaying system information ........................................................................................... 69

Restoring default settings in the Setup Utility .................................................................... 69

Exiting the Setup Utility ...................................................................................................... 69

Setup Utility menus ............................................................................................................................ 70

Main menu ......................................................................................................................... 70

Security menu .................................................................................................................... 70

System Configuration menu .............................................................................................. 70

Diagnostics menu .............................................................................................................. 71

viii

Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Index ................................................................................................................................................................... 72

ix

Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

x

Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

1 Features

Identifying the hardware

Components included with the computer may vary by region and model. The illustrations in this chapter

identify the standard features on most computer models.

To see a list of hardware installed in the computer, follow these steps:

1. Select Start > My Computer.

2. In the left pane of the System Tasks window, select View system information.

3. Select Hardware tab > Device Manager.

You can also add hardware or modify device configurations using Device Manager.

Top components

TouchPad

Component Description

(1) TouchPad on/off button Turns the TouchPad on and off.

(2) Left TouchPad button* Functions like the left button on an external mouse.

(3) TouchPad* Moves the pointer and selects or activates items on the

screen.

Identifying the hardware 1

Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

(4) TouchPad scroll zone Scrolls up or down.

(5) Right TouchPad button* Functions like the right button on an external mouse.

(6) TouchPad on/off light

ł

White: TouchPad is on.

ł

Amber: TouchPad is off.

*This table describes factory settings. To view or change pointing device preferences, select Start > Control Panel > Printers

and Other Hardware > Mouse.

Light

Component Description

Caps lock light On: Caps lock is on.

2 Chapter 1 Features

Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Keys

Component Description

(1) Function keys Execute frequently used system functions when

pressed in combination with the fn key.

(2) Embedded numeric keypad keys Can be used like the keys on an external numeric

keypad.

(3) fn key Executes frequently used system functions when

pressed in combination with a function key.

(4) Windows® logo key Displays the Windows Start menu.

(5) Windows applications key Displays a shortcut menu for items beneath the

pointer.

Front components

Identifying the hardware 3

Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Component Description

(1) Power light

ł

On: The computer is on.

ł

Blinking: The computer is in Standby.

ł

Off: The computer is off.

(2) Power switch

ł

When the computer is off, slide the switch to turn

on the computer.

ł

When the computer is on, briefly slide the switch

to initiate Standby.

ł

When the computer is in Standby, briefly slide

the switch to exit Standby.

ł

When the computer is in Hibernation, briefly

slide the switch to exit Hibernation.

If the computer has stopped responding and

Windows shutdown procedures are ineffective, slide

and hold the power switch for at least 5 seconds to

turn off the computer.

To learn more about your power settings, select

Start > Control Panel > Performance and

Maintenance > Power Options.

(3) Drive light Blinking: The hard drive or flash drive is being

accessed.

(4) Battery light

ł

On: A battery is charging.

ł

Blinking: A battery that is the only available

power source has reached a low battery level.

When the battery reaches a critical battery level,

the battery light begins blinking rapidly.

ł

Off: If the computer is plugged into an external

power source, the light turns off when all

batteries in the computer are fully charged. If the

computer is not plugged into an external power

source, the light stays off until the battery

reaches a low battery level.

(5) Wireless light

ł

Blue: An integrated wireless device, such as a

wireless local area network (WLAN) device, is

on.

ł

Amber: All wireless devices are off.

(6) Wireless switch Turns the wireless feature on or off, but does not

establish a wireless connection.

NOTE: A wireless network must be set up in order

to establish a wireless connection.

4 Chapter 1 Features

Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Right-side components

Component Description

(1) Vent Enables airflow to cool internal components.

NOTE: The computer fan starts up automatically to

cool internal components and prevent overheating. It is

normal for the internal fan to cycle on and off during

routine operation.

(2) SD Card Reader Supports the following optional digital card formats:

ł

MultiMediaCard (MMC)

ł

Secure Digital (SD) Memory Card

(3) USB port Connects an optional USB device.

(4) USB SmartDrive (select models only) Connects an optional HP USB Disk-On-Key.

(5) Security cable connector Attaches an optional security cable to the computer.

NOTE: The security cable is designed to act as a

deterrent, but it may not prevent the computer from

being mishandled or stolen.

Left-side components

Component Description

(1) Power connector Connects an AC adapter.

(2) USB port Connects an optional USB device.

Identifying the hardware 5

Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Component Description

(3) Vent Enables airflow to cool internal components.

NOTE: The computer fan starts up automatically to

cool internal components and prevent overheating. It

is normal for the internal fan to cycle on and off during

routine operation.

(4) Expansion port Connects an optional VGA cable, which allows you to

connect an external VGA monitor or projector.

(5) Audio-out (headphone) jack/Audio-in (microphone)

jack

Produces sound when connected to optional powered

stereo speakers, headphones, earbuds, a headset, or

television audio. Also connects an optional computer

headset microphone, stereo array microphone, or

monaural microphone.

WARNING! To reduce the risk of personal injury,

adjust the volume before putting on headphones,

earbuds, or a headset. For additional safety

information, refer to the Regulatory, Safety and

Environmental Notices.

NOTE: When a device is connected to the jack, the

computer speakers are disabled.

(6) RJ-45 (network) jack Connects a network cable.

Display components

Component Description

(1) Speakers (2) Produce sound.

(2) Internal display switch Turns off the display if the display is closed while the

power is on.

6 Chapter 1 Features

Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Component Description

(3) Internal microphone Records sound.

(4) Webcam Captures still photographs.

NOTE: For additional webcam features, you can install

optional software to expand the webcam experience.

(5) Webcam light On: The webcam is in use.

Bottom components

Component Description

(1) Battery bay Holds the battery.

(2) Battery release latches (2) Release the battery from the battery bay.

(3) Memory module compartment Contains the memory module slot.

(4) Vents (2) Enable airflow to cool internal components.

NOTE: The computer fan starts up automatically to cool

internal components and prevent overheating. It is normal

for the internal fan to cycle on and off during routine

operation.

Identifying the hardware 7

Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Wireless antennae

Component Description

(1) WLAN antennae (2)* Send and receive wireless signals to communicate with wireless

local area networks (WLANs).

(2) WWAN antennae (2) (select models only)* Send and receive wireless signals to communicate with wireless

wide-area networks (WWANs).

*The antennae are not visible from the outside of the computer. For optimal transmission, keep the areas immediately around

the antennae free from obstructions.

To see wireless regulatory notices, refer to the section of the Regulatory, Safety and Environmental

Notices that applies to your country or region. To access these notices, click Start > Help and

Support > User Guides.

8 Chapter 1 Features

Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Additional hardware components

Component Description

(1) Power cord* Connects an AC adapter to an AC outlet.

(2) AC adapter Converts AC power to DC power.

(3) Battery* Powers the computer when the computer is not plugged into

external power.

*Batteries and power cords vary in appearance by region and country.

Identifying the labels

The labels affixed to the computer provide information you may need when you troubleshoot system

problems or travel internationally with the computer.

ł

Service tag—Provides important information including the following:

Ń

Product name (1). This is the product name affixed to the front of your computer.

Ń

Serial number (s/n) (2). This is an alphanumeric identifier that is unique to each product.

Ń

Part Number/Product number (p/n) (3). This number provides specific information about the

product's hardware components. The part number helps a service technician to determine

what components and parts are needed.

Ń

Model description (4). This is the number you use to locate documents, drivers, and support

for your computer.

Ń

Warranty period (5). This number describes the duration (in years) of the warranty period for

this computer.

Identifying the labels 9

Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Have this information available when you contact technical support. The service tag label is affixed

to the bottom of the computer.

ł

Microsoft® Certificate of Authenticity—Contains the Windows® Product Key. You may need the

Product Key to update or troubleshoot the operating system. This certificate is affixed to the bottom

of the computer.

ł

Regulatory label—Provides regulatory information about the computer. The regulatory label is

affixed to the bottom of the computer.

ł

Wireless certification label(s)—Provide information about optional wireless devices and the

approval markings of some of the countries or regions in which the devices have been approved

for use. An optional device may be a wireless local area network (WLAN) device or an optional

Bluetooth® device. If your computer model includes one or more wireless devices, one or more

certification labels are included with your computer. You may need this information when traveling

internationally. Wireless certification labels are affixed to the bottom of the computer.

ł

HP Mobile Broadband Module serial number label (select models only)—Provides the serial

number of your HP Mobile Broadband Module. This label is located on the bottom of your computer.

10 Chapter 1 Features

Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Page is loading ...

HP Mini User manual

HP Mini User manual

Related papers

Other documents