2. Computers & electronics
  3. Audio & home theatre
  4. Portable speakers
  5. Sabrent
  6. AU-2X35

Sabrent AU-2X35 User manual

  • Hello! I've reviewed the user manual for the USB Sound Adapter. This document provides instructions for connecting and setting up the adapter on Windows and Mac OS. I am ready to answer your questions about how to use it with your microphone and speaker/headphones.
  • How do I connect a microphone using this adapter?
    Which hole do I connect speakers/headphones to?
    How do I set up the adapter on Windows for speakers?
    How do I set up the adapter on Windows for microphone?
    How do I set up the adapter on a Mac for headphones?
    How do I set up the adapter on a Mac for microphone?
USB Sound Adapters
1. Connect Sound Adapter to available USB port on your Windows or Mac OS
computer.
2. Connect a Microphone to the Pink hole when using with Microphone.
3. Connect Speaker/Headphone to the Green hole when using with
Speaker/Headphone.
Speakers/Headphone setup on Windows
1. Right click on the Speaker icon on your taskbar.
2. Left click on Playback devices.
3. Right click on Speakers USB.
4. Left click on Set as Default Device.
5. Left click on OK.
6. You are ready to use this adapter.
Microphone setup on Windows
1. Right click on the Speaker icon on your taskbar.
2. Left click on Recording Devices.
3. Right click on Microphone USB.
4. Left click on Set as Default Device.
5. Left Click on OK.
6. You are ready to use this adapter.
Speaker/Headphone setup on Mac
1. Click on System Preferences on your Taskbar.
2. Click on Sound.
3. Click on USB Headphone Set.
4. You are ready to use this adapter.
Microphone setup on Mac
1. Click on System Preferences on your Taskbar.
2. Click on Sound.
3. Click on Input.
4. Click on USB Headphone Set.
5. You are ready to use this adapter.
/