Fujitsu CELSIUS H7510 User manual

Type
User manual

Fujitsu CELSIUS H7510 is a powerful and versatile mobile workstation designed for professionals who demand the best in computing performance and portability. With its high-end specifications and cutting-edge technology, the CELSIUS H7510 is ideal for demanding applications such as CAD, 3D modeling, video editing, and scientific research.

Fujitsu CELSIUS H7510 is a powerful and versatile mobile workstation designed for professionals who demand the best in computing performance and portability. With its high-end specifications and cutting-edge technology, the CELSIUS H7510 is ideal for demanding applications such as CAD, 3D modeling, video editing, and scientific research.

Page 1 of 52
System expansions and repairs document 2
Information on the installation and removal of components 3
Screws 4
To ols 5
Removing the battery 6
Removing the memories under the service door 7
Inserting the memories under the service door 9
Removing the service door 11
Removing the M.2 module under the service door 12
Inserting the M.2 module under the service door 13
Removing the 2.5” HDD 14
Inserting the 2.5” HDD 15
Mandatory Support Bulletins for Disassembly 17
Removing the LTE module 18
Removing the WLAN module 19
Removing the fan 20
Removing the keyboard 21
Removing the memories under the keyboard 23
Removing the M.2 module under the keyboard 24
Removing the lower assy 25
Removing the SmartCard sub board 26
Removing the TPM module (Nation Z) 27
Removing the touchpad buttons sub board 28
Removing the palm vein/fingerprint sensor sub board 29
Removing the DC-in connector 31
Removing the mainboard 33
Removing the USB / audio sub board 34
Removing the sub board switch 36
Removing the display 38
Removing the LCD front cover assy 39
Removing the LCD panel 41
Removing the LCD hinges 43
Removing the webcam 44
Spare parts Celsius H7510 46
Disposal information for recycling companies 51
System expansions and repairs document
CELSIUS H7510
Version date
Category
Contents
Page 2 of 52
System expansions and repairs document
We recommend printing out the relevant sections of this chapter prior to
installation as the device for installing/removing hardware components needs to
be switched off.
The following illustrations may differ from your device, depending on its configuration and features.
If you have received any further documents with your device, you should read these through carefully.
Please note the following instructions before installing/removing system components:
The device must be switched off when installing/removing components and it
must not be in power-saving mode.
Disconnect the mains plug before opening the device.
After unplugging the mains plug, discharge the remaining voltage by pressing
the activation button.
Remove all externally connected cables.
Take care not to pinch any cables when installing/removing components.
Please ensure that the installed components that might heat up intensely
during operation do not exceed the permitted operating temperature.
Please take note of the target audience addressed in this manual. Damage to the device incurred as a result of unqualified
methods used during repair work as well as the use of unsuitable spare parts or assemblies during the repair work, or
upgrades of the device may void your warranty claim.
During a system expansion or a hardware upgrade, it is possible that the BIOS
must be updated. You can find more information in the technical information
provided for your device.
!
Page 3 of 52
Information on the installation and removal of components
Please pay attention to the locking mechanism (indentations and centring pins) when installing hardware components.
Note that some components on the mainboard may be very hot if the device was in use shortly before the case was removed.
Utmost care is required during installation and removal to avoid damaging components.
Never use items with sharp edges (screwdrivers) to lever them out.
Parts with Electrostatic Sensitive Devices (ESD) can be identified by a corresponding label.
When dealing with boards with ESDs, the following points must always be observed:
Always ensure there is a static discharge (e.g. by touching a grounded object)
prior to commencing with the work.
The devices and tools being used must not be statically charged.
Only touch the components along the edges or on the areas marked in green
(contact points).
Contacts and electronic components must not touch when handling components
equipped with ESD protection.
Page 4 of 52
Screws
Screw: M2XL4
Screwdriver: Phillips PH00
Screw: M2.5XL6 (D4.5)
Screwdriver: Phillips PH00
Screw: M2XL2.5
Screwdriver: Phillips PH00
Return to Table of Contents
Page 5 of 52
Tools
Screwdriver: Phillips PH00
Plastic tool
Plastic tool
Return to Table of Contents
Page 6 of 52
Removing the battery
Required work steps:
None
Required tools:
none
Close the display.
Disconnect the mains plug from the mains outlet.
Disconnect all the cables that are connected to the notebook.
Turn your notebook over and place it on a stable and flat surface. If necessary, place a non-slip cloth on the surface to avoid
scratching the notebook.
Slide the connector lock in the yellow arrow direction.
Slide the connector lock in the red arrow direction and hold it in place.
Lift the battery and remove it (green arrow).
Return to Table of Contents
Page 7 of 52
Removing the memories under the service door
Required work steps:
Removing the battery
Required tools:
Screwdriver: Phillips PH00
Remove the screw M2.5XL6 (yellow arrow).
Lift the memory door in the direction indicated by the green arrow and remove it.
Page 8 of 52
Release the locks and push them sideways (yellow arrows).
Remove the memory in the direction indicated by the arrow (green arrows).
Return to Table of Contents
Page 9 of 52
Inserting the memories under the service door
Required work steps:
Removing the battery
Required tools:
Screwdriver: Phillips PH00
Remove the screw M2.5XL6 (yellow arrow).
Lift the memory door in the direction indicated by the green arrow and remove it.
Note the coding of the memory
Page 10 of 52
Carefully place the memory into the socket (green arrow).
Carefully press on the memory (yellow arrows) until the lock engages on both sides.
The same memory type must be inserted into all four slots.
Return to Table of Contents
Page 11 of 52
Removing the service door
Required work steps:
Removing the battery
Required tools:
Screwdriver: Phillips PH00
Remove the screw M2.5XL6 (yellow circles).
Lift the service door in the direction indicated by the green arrows.
Return to Table of Contents
Page 12 of 52
Removing the M.2 module under the service door
Required work steps:
Removing the battery
Removing the service door
Required tools:
Screwdriver: Phillips PH00
Remove the screw M2XL3 (yellow arrow).
Lift the M.2 module (green arrow) and remove it from the socket in the direction indicated by the blue arrow.
Return to Table of Contents
Page 13 of 52
Inserting the M.2 module under the service door
Required work steps:
Removing the battery
Removing the service door
Required tools:
Screwdriver: Phillips PH00
Insert the M.2 module into the socket in the direction indicated by the yellow arrow and carefully press it on the other side.
Observe the coding.
Fix the M.2 module with an M2XL3 screw (yellow circle).
Return to Table of Contents
Page 14 of 52
Removing the 2.5” HDD
Required work steps:
Removing the battery
Removing the service door
Required tools:
none
Open the connector lock (green arrow) upwards and remove the flexprint cable.
Lift the HDD from the casing in the direction indicated by the yellow arrow.
Return to Table of Contents
Page 15 of 52
Inserting the 2.5” HDD
Required work steps:
Removing the battery
Removing the service door
Required tools:
none
Attach the HDD rubbers to the hard disk (yellow arrows).
Attach the HDD flexprint cable to the hard disk (green arrow).
Observe the coding of the plug-in connections for the HDD and cable.
Page 16 of 52
Insert the hard disk.
Insert the flexprint cable into the intended plug and close the connector lock (green arrow).
Return to Table of Contents
Page 17 of 52
Only intended for authorised service technicians (login required)
Mandatory Support Bulletins for Disassembly
SB-M-10030
Minimum requirements to properly finalise hardware repairs on mobile systems
SB-M-15007
WIN8x & WIN10 - Spare product key for repaired devices
For any information about ESD, please refer to the web-based training course ESD in
electronics
Page 18 of 52
Only intended for authorised service technicians
Removing the LTE module
Required work steps:
Removing the battery
Removing the service door
Required tools:
Screwdriver: Phillips PH00
Remove both LTE antennas (yellow arrows).
Remove the screw M2XL3 (yellow circle).
Remove the LTE module from the socket in the direction indicated by the green arrow.
Return to Table of Contents
Page 19 of 52
Only intended for authorised service technicians
Removing the WLAN module
Required work steps:
Removing the battery
Removing the service door
Required tools:
Screwdriver: Phillips PH00
Remove the two WLAN antennas (yellow circle).
Remove the screw M2XL3 (yellow arrow).
Remove the WLAN module from the socket in the direction indicated by the green arrow.
Return to Table of Contents
Page 20 of 52
Only intended for authorised service technicians
Removing the fan
Required work steps:
Removing the battery
Removing the service door
Required tools:
Screwdriver: Phillips PH00
Remove the three screws M2.5XL6 (yellow circles).
Remove the fan cable (yellow arrows) from the mainboard.
Remove the cable from the mainboard (blue arrow) and disconnect it.
Remove the fan on the right first, then the one on the left.
Return to Table of Contents
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52

Fujitsu CELSIUS H7510 User manual

Type
User manual

Fujitsu CELSIUS H7510 is a powerful and versatile mobile workstation designed for professionals who demand the best in computing performance and portability. With its high-end specifications and cutting-edge technology, the CELSIUS H7510 is ideal for demanding applications such as CAD, 3D modeling, video editing, and scientific research.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI