Legrand RHCL453PDBCCV4 User manual

Type
User manual


Re-calibrate settings and change the minimum light level.
 Disconnect power at the breaker box
then remove wall plate.
 Lower the slider to the minimum
setting (as shown).
 Use a small, insulated flat head
screwdriver to move the calibration
wheel all the way up towards the
” sign.
 Turn wheel down towards the “+
sign in small increments until the
flickering is gone.







  • Page 1 1

Legrand RHCL453PDBCCV4 User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI