ASSEMBLY INSTRUCTION
ASIN NO. : B07376VCCV
In order to ensure safety and maximize the lifetime of the lamp, please
make sure to read the following instructions thoroughly before assembly.
Assembly Instructions:
Note: Electrical wire is connected continuously through the poles.
Please DO NOT pull wire during unpacking. Bad connections may result.
1. Unpack all parts from carton carefully.
2. Place Wall Anchor (A) into the wall.
3. Place the Crossbar (B) onto wall and place the Wall Screws (C) into the Wall Anchor (A).
4. Place the Canopy onto the Crossbar (B) and tighten with the two Screws (D) by
clockwise.
5. Place the LED Bulb (F) onto the Socket.
6. Assembly is completed.
WARNING:
1.Use Type B Bulb of LED 5W maximum (Bulb included)
2. Do not use polishes or cleaners on your lamp.
Simply wipe clean with a soft cloth.
Made in China
/
