Gorilla 7500101 User manual

Brand: Gorilla

Model: 7500101

Type: User manual

Gorilla Super Glue

General Product Information:

Gorilla Super Glue is an ethyl cyanoacrylate-based glue that is reinforced for impact resistance,

to provide a less brittle and Impact-Tough

®

bond. Gorilla Super Glue is quick curing and ideal

for smaller repairs that require an instant bond for projects where clamping is not needed.

Use Instructions:

1. Protect work area from spills.

2. Clean and dry surfaces to be bonded.

3. Liquid: Apply a small amount of Gorilla Super Glue to one surface. Only one drop per sq.

inch recommended. Set time can vary based on amount of glue and type of surface glued.

Excess glue will slow the cure and can cause delayed or failed bond. Gel: Shake vigorously

to mix ingredients, turn upside down and tap on hard surface to get gel in nozzle. Gel

Tubes: Do not require shaking as they do not shake effectively within the tube. One dab per

square inch. Brush & Nozzle: Upper cap-nozzle for dripping. Full cap-brush for smooth

brush application.

4. Press the two surfaces together for about 10-45 seconds. Wait 24 hours for full cure.

5. After using, clean nozzle with a dry cloth and replace outer cap. Store in cool, dry place.

* Not recommended for use on polyethylene or polypropylene plastic.

1

Gorilla 7500101 User manual

Brand: Gorilla

Model: 7500101

Type: User manual

Related papers

Other documents