Annin Flagmakers 2472 User manual

Type
User manual

Annin Flagmakers 2472 is a solar-powered light designed to be placed atop a flagpole. It features super bright LED lights that can work up to eight hours at night after a full sunny day of charging. The light has a built-in light sensor that turns it on automatically at night. It's easy to install, with no wiring required. Simply insert the batteries, place the solar light atop the pulley assembly, and replace the ornament. The light is designed to work when it is dark, and may be very dim or not turn on at all if there is high ambient lighting nearby.

Annin Flagmakers 2472 is a solar-powered light designed to be placed atop a flagpole. It features super bright LED lights that can work up to eight hours at night after a full sunny day of charging. The light has a built-in light sensor that turns it on automatically at night. It's easy to install, with no wiring required. Simply insert the batteries, place the solar light atop the pulley assembly, and replace the ornament. The light is designed to work when it is dark, and may be very dim or not turn on at all if there is high ambient lighting nearby.

Do not touch the surface of the solar collecting panels after
removing the plastic lm covering.
90 Day Limited Warranty
You can check the operation of the light by simply covering the
solar panels completely to activate the light sensor. We suggest
that you test the light in this manner before you install the light
on the agpole.
Remember that the light is designed to work when it is dark. If
there is high ambient lighting nearby then the LED’s may be very
dim or not turn on at all.
Although the batteries have been charged by the manufacturer, the
power level will probably have dropped when you receive them.
PRECAUTIONS:
REPLACEMENT PARTS:
WARRANTY:
4.
Please fully charge the solar light for three days in bright
sunlight to realize maximum performance.
5.
3.
2.
1.
If the light stops working after being used for a long time, it is
possible that the batteries are beyond their lifespan. You can
replace the batteries with any brand of 1.2V Ni-MH rechargeable
batteries. The lifetime of the LED lights is over 100,000 hours. You
should never need to change them.
Copyright 2012
Annin Flagmakers, Roseland, NJ 07068
www.annin.com • www.facebook.com/Annin1847
This solar light is a green and environment-friendly product. It is
powered by solar energy through the solar panels. The panels
convert the sunlight into electrical energy and then charge the
1.2V Ni-MH rechargeable batteries during the day. A light sensor
turns on the light automatically at night.
Ideally, the light should be in a place to capture the maximum
amount of sunlight. The light source is super bright LED’s which can
work up to eight hours at night after a full sunny day of charging.
1. To prolong their life, the batteries are packed separately and are not
pre-installed in the solar light. Remove the three battery doors with a
small Phillips-head screwdriver,
insert the batteries and
replace the battery doors.
2. Unscrew the ornament from
the top of your ag pole and
place the solar light atop the
pulley assembly, with the
solar collecting panels facing
up. Replace the ornament.
INSTRUCTIONS:
See Illustration
Important: See precautions on reverse
  • Page 1 1

Annin Flagmakers 2472 User manual

Type
User manual

Annin Flagmakers 2472 is a solar-powered light designed to be placed atop a flagpole. It features super bright LED lights that can work up to eight hours at night after a full sunny day of charging. The light has a built-in light sensor that turns it on automatically at night. It's easy to install, with no wiring required. Simply insert the batteries, place the solar light atop the pulley assembly, and replace the ornament. The light is designed to work when it is dark, and may be very dim or not turn on at all if there is high ambient lighting nearby.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI