Rocketbook EVR-E-K-A User manual

If you've got your Rocketbook Everlast in hand and you're ready to learn how to erase the pages,

this post is for you! We worked closely with paper industry experts to find the optimal synthetic

polyester blend to create pages that can be wiped clean of FriXion ink. We named it Everlast for

a reason. Follow these directions to learn how to use your Everlast infinitely!

Make sure to write with Pilot FriXion ink. Any Frixion pen, marker, or highlighter will work

with the Everlast. What won't work with Everlast is dry erase markers, so don't use them unless

you want the writing to be permanent (trust us on this!)

Sync your pages with the Rocketbook App before you wipe them clean. We know, that one

seems obvious. But you'd be surprised...

Moisten a cloth with water and wipe firmly to clean the ink off. The keyword here is moist.

We know you probably hate that word, but it applies. Not sopping wet, not lightly sprayed, but

damp. Wetting a towel or washcloth and squeezing out the excess water before wiping will do.

Give your page a few seconds to dry. Depending on how well you followed instruction number

three, you may need it. After residual water evaporates off of the page, you may proceed to any

other pages that need to be erased.