HEAVY DUTY
Para trabajo pesado
BAR
PULL
Recycle
Recicla
MADE IN / HECHO EN CHINA
DISTRIBUTED BY / DISTRIBUIDO POR
HOME DEPOT
2455 PACES FERRY RD., N.W.
ATLANTA, GA 30339
HOMEDEPOT.COM
WARNING: This product contains chemicals known to the State of California to
cause cancer and birth defects defects or other reproductive harm.
ADVERTENCIA: Este producto contiene químicos que el estado de California reconoce
como causantes de cáncer, malformaciones congénitas y otros daños al sistema
reproductor.
Ideal for wood doors.
INSTRUCTIONS:
1. Measure the distance
between the screw
holes on the back of
the pull to determine
the correct spacing
2.
Position the pull in
desired location
3.
Mark screw location
based on the above
screw hole measure
-
ments
4. Drill 3/32
in pilot holes
5.
Install and tighten
screws
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Ryobi Outdoor Cultivator 510r User manual
-
DeVilbiss Air Compressor User manual
-
Ryobi Trimmer 875r User manual
-
-
MOTO GUZZI California EV V1100 Service Station Manual
-
-
Toro 14in Electric Trimmer User manual
-
Cub Cadet SLT1554, SLT1550 User manual
-
Chicago Electric 62866 Owner's manual
-
Champion Power Equipment 100236 User manual
