21
20. The appliance becomes hot during operation. Please use pot
holders. Never cover the appliance during operation.
21. Provide for adequate ventilation when the appliance is in opera-
tion.
22.
Use the appliance only indoors.
23. The appliance does not shut off automatically. Therefore, set
the temperature selector switch to 0 and unplug the appliance
after use.
24. In spite of the integrated timer that switches off the appliance
after a maximum of 30 minutes, after preparing food the tem-
perature regulator must be set to 0/OFF/AUS and the mains plug
must be unplugged.
25.
Never cover the appliance with aluminium foil or other objects
during operation. This also applies for the crumb tray; the crumb
tray must always be freely accessible.
26. Never clean the appliance with scouring sponges that contain
metal. Scouring pads that contain metal can cause electric shock
if the contact electrical components!
27. Please note that the food that is prepared in the appliance must
not be heavier than 3.0 kg. Place the prepared food uniformly
on the baking sheet, or the grill grate to avoid one-sided load.
28. Never place paper, plastic or other similar objects in the oven.
29. If you notice scratches or other damage on the glass door of
the appliance, please contact our customer service organisation
before placing the appliance in service again.
30. Do not immerse the appliance in water or other liquids.
31. All parts must be completely dry before being assembled.
32. Please allow the appliance to cool completely before moving,
cleaning or storing it. Before handling the appliance, always
unplug it from the electrical outlet.
33. Check the plug and the power cord regularly for wear or damage.
In case of damage to the power cord or other parts, please send
the appliance for inspection and/or repair to our after sales ser
-
vice. Unauthorized repairs can result in serious risks to the user
and will void the warranty.
CAUTION:
The appliance becomes very hot during operation!
Never open the housing of the appliance.
This can result in electric
shock.
The manufacturer will not be liable in the event of incorrect assembly, improper or incorrect use or if
repairs are carried out by unauthorized third parties.
Copyright UNOLD AG | www.unold.de