KB 308 BT
9
ENGLISH
1 . To save a radio station , press the PLAY / PAUSE button and then use the SKIP
keys - ( 3 ) and SKIP + (4 ) to select the preset number you want . The radio station
is now saved to the chosen location. You can save up to 40 radio stations.
2 . To recall a preset station number using the numeric keypad. Note: To get the best
FM reception , extend the antenna ( 12). If the reception is not good otherwise try to
adjust the length of the antenna, however the quality of FM reception depends on the
place where the device is placed .
The proximity of TV sets , fluorescent lamps , or other appliances may cause
interference in the reception of radio programs , in this case removed the radio
player .
OPERATION USB / MICRO SD
1 . Insert the USB memory into the USB port (14).
2 . First press the S button ( 2 ) until you see the heading USB , wait
few seconds for the external player loads all the files .
3 . Playback will start automatically .
4 . To insert a pause, press the key once the PLAY / PAUSE ( 8).
5 . To release the pause, press a second time the PLAY / PAUSE button (8).
6 . To reverse / forward quickly listening to a song , press and hold the SKIP - (7)
and SKIP + (9).
7 . To switch to the playback of the previous / next track , press the SKIP - (7) and
SKIP + (9).
8 . To select a track type in the number using the numeric keys (12).
OPERATION AUX
1 . Connect the cable jack adapter (not supplied ) into the audio output of your
device : smartphones , tablets , multimedia players , inserting the other end into the
AUX ( 17) of the player .
2 . First press the S button ( 2 ) until you see the item AUX .
3 . To enable playback of the external source , refer to the manual of the connected
device .
IMPORTANT SAFETY INSTRUCTIONS
The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids,
such as vases, shall be placed on the apparatus.
When the USB cable is used as the disconnect device, the disconnect device shall remain readily
operable. To be completely disconnected the power input, the USB cable shall be disconnected
from the power source completely.
No naked flame sources, such as lighted candles, should be placed on the apparatus.
Minimum distances 2.0cm around the apparatus for sufficient ventilation. The ventilation should