IMPORTANT: IMPORTANT : IMPORTANTE:
Read Before Using Lire avant usage Leer antes de usar
For English Version Version française Versión en español
See page 2 Voir page 12 Ver la página 22
Operating/Safety Instructions
Consignes de fonctionnement/sécurité
Instrucciones de funcionamiento y seguridad
1-877-BOSCH99 (1-877-267-2499) www.boschtools.com
Call Toll Free for
Consumer Information
& Service Locations
Pour obtenir des informations
et les adresses de nos centres
de service après-vente,
appelez ce numéro gratuit
Llame gratis para
obtener información
para el consumidor y
ubicaciones de servicio
CRS180
2610034440 03-14_CRS180 3/27/14 11:44 AM Page 1
-2-
"25.$5($6$)(7<
((3:25.$5($&/($1$1':(///,7Cluttered
or dark areas invite accidents.
2 12723(5$7( 32:(5 722/6,1 (;3/26,9(
$70263+(5(668&+ $6 ,1 7+( 35(6(1&(2)
)/$00$%/(/,48,'6*$6(625'867 Power
tools create sparks which may ignite the dust
or fumes.
((3 &+,/'5(1 $1'%<67$1'(56$:$<:+,/(
23(5$7,1* $ 32:(5 722/ Distractions can
cause you to lose control.
/(&75,&$/6$)(7<
2:(5 722/ 3/8*6 08670$7&+ 7+(287/(7
(9(502',)<7+(3/8*,1$1<:$<2127
86( $1< $'$37(5 3/8*6 :,7+ ($57+('
*5281'('32:(5 722/6 Unmodified plugs
and matching outlets will reduce risk of electric
shock.
92,'%2'<&217$&7:,7+($57+('25*5281'('
685)$&(668&+$63,3(6 5$',$72565$1*(6
$1'5()5,*(5$7256There is an increased risk
of electric shock if your body is earthed or
grounded.
2127(;326(32:(5722/6 72 5$,125:(7
&21',7,216 Water entering a power tool will
increase the risk of electric shock.
2127$%86(7+(&25'(9(586(7+(&25'
)25&$55<,1*38//,1*25813/8**,1*7+(32:(5
722/((3&25'$:$<)520+($72,/6+$53
('*(625029,1*3$576Damaged or entangled
cords increase the risk of electric shock.
"+(1 23(5$7,1* $32:(5722/ 287'2256
86($1(;7(16,21&25'68,7$%/()25287'225
86( Use of a cord suitable for outdoor use
reduces the risk of electric shock.
)23(5$7,1*$32:(5722/,1$'$03/2&$7,21
,681$92,'$%/(86($5281'$8/7,5&8,7
17(55837(53527(&7('6833/<Use of
an GFCI reduces the risk of electric shock.
(5621$/6$)(7<
7$<$/(57:$7&+ :+$7 <28 $5( '2,1* $1'
86( &20021 6(16( :+(1 23(5$7,1*$
32:(5722/212786($32:(5722/:+,/(
<28$5(7,5('2581'(57+(,1)/8(1&(2)'58*6
$/&2+2/250(',&$7,21A moment of inattention
while operating power tools may result in
serious personal injury.
6(3(5621$/3527(&7,9((48,30(17/:$<6
:($5 (<( 3527(&7,21 Protective equipment
such as dust mask, non-skid safety shoes, hard
hat, or hearing protection used for appropriate
conditions will reduce personal injuries.
5(9(1781,17(17,21$/67$57,1*1685(7+(
6:,7&+ ,6 ,1 7+( 2))326,7,21 %()25(
&211(&7,1*7232:(56285&($1'25%$77(5<
3$&.3,&.,1*83 25&$55<,1*7+( 722/
Carrying power tools with your finger on the
switch or energizing power tools that have the
switch on invites accidents.
(029($1<$'-867,1*.(<25:5(1&+%()25(
7851,1* 7+( 32:(5 722/ 21A wrench or a
key left attached to a rotating part of the
power tool may result in personal injury.
212729(55($&+((33523(5)227,1*$1'
%$/$1&( $7 $// 7,0(6 This enables better
control of the power tool in unexpected
situations.
5(663523(5/<2127:($5/226(&/27+,1*
25-(:(/5<((3 <285 +$,5&/27+,1*$1'
*/29(6$:$< )520 029,1*3$576Loose
clothes, jewelry or long hair can be caught in
moving parts.
)'(9,&(6 $5(3529,'(' )257+( &211(&7,21
2)'867(;75$&7,21 $1'&2//(&7,21)$&,/,7,(6
(1685(7+(6($5(&211(&7('$1'3523(5/<
86('Use of dust collection can reduce dust-
related hazards.
2:(5722/86($1'&$5(
2 127 )25&( 7+( 32:(5 722/ 6( 7+(
&255(&732:(5 722/)25<285$33/,&$7,21The
correct power tool will do the job better and
safer at the rate for which it was designed.
212786(7+(32:(5722/,)7+(6:,7&+'2(6
127 7851 ,7 21 $1' 2))Any power tool that
cannot be controlled with the switch is
dangerous and must be repaired.
($'$//6$)(7<:$51,1*6$1'$//,16758&7,216Failure to follow the warnings
and instructions may result in electric shock, fire and/or serious injury.
!"
The term “power tool” in the warnings refers to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
!
WARNING
(1(5$/2:(522/$)(7<"$51,1*6
2610034440 03-14_CRS180 3/27/14 11:44 AM Page 2
-3-
,6&211(&77+(3/8*)5207+(32:(56285&(
$
1'257+(%$77(5<3$&.)5207+(32:(5722/
%()25( 0$.,1* $1<$'-8670(176&+$1*,1*
$&&(6625,(6 25 6725,1*32:(5722/6 Such
preventive safety measures reduce the risk of
starting the power tool accidentally.
725(,'/( 32:(5 722/6 2872)7+( 5($&+ 2)
&+,/'5(1$1''2127$//2:3(5621681)$0,/,$5
:,7+7+(32:(5722/257+(6(,16758&7,21672
23(5$7(7+( 32:(5722/ Power tools are
dangerous in the hands of untrained users.
$,17$,132:(5722/6+(&.)250,6$/,*10(17
25%,1',1* 2) 029,1* 3$576%5($.$*( 2)
3$576$1'$1<27+(5 &21',7,21 7+$7 0$<
$))(&77+(32:(5722/?623(5$7,21)'$0$*('
+$9( 7+( 32:(5722/ 5(3$,5(' %()25( 86(
Many accidents are caused by poorly
maintained power tools.
((3&877,1*722/66+$53$1'&/($1Properly
maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to
control.
6( 7+( 32:(5 722/$&&(6625,(6 $1' 722/
%,76(7&,1$&&25'$1&(:,7+7+(6(,16758&7,216
7$.,1*,172$&&28177+(:25.,1*&21',7,216
$1' 7+( :25. 72%( 3(5)250('Use of the
power tool for operations different from those
intended could result in a hazardous situation.
$77(5<722/86($1'&$5(
(&+$5*( 21/< :,7+ 7+( &+$5*(5 63(&,),('
%< 7+( 0$18)$&785(5 A charger that is
suitable for one type of battery pack may
create a risk of fire when used with another
battery pack.
6( 32:(5 722/6 21/<:,7+ 63(&,),&$//<
'(6,*1$7('%$77(5<3$&.6 Use of any other
battery packs may create a risk of injury and
fire.
"+(1 %$77(5< 3$&. ,6 127 ,1 86( .((3 ,7
$:$< )520 27+(5 0(7$/ 2%-(&76 /,.( 3$3(5
&/,36 &2,16 .(<6 1$,/6 6&5(:6 25 27+(5
60$//0(7$/2%-(&767+$7 &$1 0$.( $
&211(&7,21 )520 21( 7(50,1$/ 72 $127+(5
Shorting the battery terminals together may
cause burns or a fire.
1'(5 $%86,9( &21',7,216 /,48,' 0$< %(
(-(&7(')5207+(%$77(5<$92,' &217$&7 )
&217$&7 $&&,'(17$//< 2&&856 )/86+ :,7+
:$7(5)/,48,'&217$&76(<(6$'',7,21$//<
6((. 0(',&$/ +(/3 Liquid ejected from the
battery may cause irritation or burns.
(59,&(
$9(<28532:(5722/6(59,&('%<$48$/,),('
5(3$,5 3(5621 86,1* 21/< ,'(17,&$/
5(3/$&(0(173$576This will ensure that the
safety of the power tool is maintained.
$)(7<8/(6)2525'/(66(&,352&$7,1*$:6
2/'32:(5722/%< ,168/$7('*5,33,1*
685)$&(6:+(1 3(5)250,1* $1 23(5$7,21
:+(5(7+( &877,1* $&&(6625< 0$< &217$&7
+,''(1:,5,1*Cutting accessory contacting a
"live" wire may make exposed metal parts of
the power tool "live" and could give the
operator an electric shock.
6( &/$036 25 $127+(5 35$&7,&$/:$< 72
6(&85( $1' 68332577+( :25.3,(&(72 $
67$%/(3/$7)250Holding the work by hand or
against your body leaves it unstable and may
lead to loss of control.
2 127 '5,// )$67(1 25 %5($. ,172 (;,67,1*
:$//62527+(5%/,1'$5($6:+(5((/(&75,&$/
:,5,1* 0$< (;,67 If this situation is
unavoidable, disconnect all fuses or circuit
breakers feeding this worksite.
((3 +$1'6$:$<)520 &877,1* $5($ 2
127 5($&+ 81'(5 7+( 0$7(5,$/ %(,1*&87
The proximity of the blade to your hand is
hidden from your sight.
((3 +$1'6 )520 %(7:((1 7+( *($5
+286,1*$1' 6$: %/$'( &/$03 3/81*(5
The reciprocating blade clamp (blade
plunger) can pinch your fingers.
212786('8//25'$0$*('%/$'(6 Bent
blades can break easily or cause kickback.
()25(67$57,1*72&877851722/$1'
$//2:7+(%/$'(72&20(72)8//63((' Tool
can chatter or vibrate if blade speed is too
slow at beginning of cut and possibly
kickback.
/:$<6 :($5 6$)(7< *2**/(6 25 (<(
3527(&7,21 :+(1 86,1* 7+,6 722/ 6( $
'8670$6.25 5(63,5$725)25 $33/,&$7,216
:+,&+*(1(5$7('867
(&85( 0$7(5,$/%()25( &877,1* (9(5
+2/',7,1<285+$1'25$&5266/(*6 Small
or thin material may flex or vibrate with the
blade, causing loss of control.
2610034440 03-14_CRS180 3/27/14 11:44 AM Page 3
-4-
$.(&(57$,1$//$'-867,1*6&5(:6.12%6
$1' 7+( %/$'( &/$03 $5( 7,*+7 %()25(
0$.,1*$ &87 Loose adjusting screws and
clamps can cause the tool or blade to slip and
loss of control may result.
"+(1 5(029,1* 7+( %/$'( )520 7+( 722/
$92,' &217$&7:,7+ 6.,1 $1'86(3523(5
3527(&7,9(*/29(6:+(1*5$63,1*7+(%/$'(
25$&&(6625< Accessories may be hot after
prolonged use.
"+(1 86,1* 7+( 6$:+22. $/:$<6 %(
$:$5( 7+$7 7+( 7+( %/$'( ,6 (;326('
Always hang the tool in an area where
yourself and bystandards can not accidently
make contact with the blade.
'',7,21$/$)(7<"$51,1*6
GFCI and personal protection devices like
electrician’s rubber gloves and footwear will
further enhance your personal safety.
212786( 21/<5$7('722/6 :,7+$
32:(56833/< While the tool may appear to
work, the electrical components of the AC
rated tool are likely to fail and create a hazard
to the operator.
((3 +$1'/(6 '5<&/($1 $1')5(()5202,/
$1' *5($6( Slippery hands cannot safely
control the power tool.
(9(/23 $ 3(5,2',&0$,17(1$1&(6&+('8/(
)25<285 722/"+(1&/($1,1*$722/%(
&$5()8/12772',6$66(0%/($1<3257,21 2)
7+( 722/ 6,1&( ,17(51$/ :,5(6 0$< %(
0,63/$&('253,1&+('256$)(7<*8$5'5(7851
635,1*6 0$< %( ,03523(5/< 02817('
Certain cleaning agents such as gasoline,
carbon tetrachloride, ammonia, etc. may
damage plastic parts.
1685( 7+( 6:,7&+ ,6 ,1 7+( 2)) 326,7,21
%()25(,16(57,1*%$77(5<3$&. Inserting the
battery pack into power tools that have the
switch on invites accidents.
20('867&5($7('%<32:(5
6$1',1* 6$:,1* *5,1',1*
'5,//,1* $1' 27+(5 &216758&7,21 $&7,9,7,(6
&217$,16&+(0,&$/6.12:172&$86(&$1&(5
%,57+ '()(&76 2527+(5 5(352'8&7,9( +$50
20((;$03/(62)7+(6(&+(0,&$/6$5(
• Lead from lead-based paints,
• Crystalline silica from bricks and cement and
other masonry products, and
• Arsenic and chromium from chemically-
treated lumber.
Your risk from these exposures varies,
depending on how often you do this type of
work. To reduce your exposure to these
chemicals: work in a well ventilated area, and
work with approved safety equipment, such as
those dust masks that are specially designed
to filter out microscopic particles.
!
WARNING
2610034440 03-14_CRS180 3/27/14 11:44 AM Page 4
-5-
Some of the following symbols may be used on your tool. Please study them
and learn their meaning. Proper interpretation of these symbols will allow you to operate the
tool better and safer.
<0%2/ $0( (6,*1$7,21;3/$1$7,21
V Volts Voltage (potential)
A Amperes Current
Hz Hertz Frequency (cycles per second)
W Watt Power
kg Kilograms Weight
min Minutes Time
s Seconds Time
Diameter Size of drill bits, grinding wheels, etc.
n
0
No load speed Rotational speed, at no load
n Rated speed Maximum attainable speed
.../min Revolutions or reciprocation Revolutions, strokes, surface speed,
per minute orbits etc. per minute
0 Off position Zero speed, zero torque...
1, 2, 3, ... Selector settings Speed, torque or position settings.
I, II, III, Higher number means greater speed
Infinitely variable selector with off Speed is increasing from 0 setting
Arrow Action in the direction of arrow
Alternating current Type or a characteristic of current
Direct current Type or a characteristic of current
Alternating or direct current Type or a characteristic of current
Class II construction Designates Double Insulated
Construction tools.
Earthing terminal Grounding terminal
Warning symbol Alerts user to warning messages
Li-ion RBRC seal Designates Li-ion battery recycling
program
Ni-Cad RBRC seal Designates Ni-Cad battery recycling
program
Read manual symbol Alerts user to read manual
Wear eye protection symbol Alerts user to wear eye protection
<0%2/6
0
2610034440 03-14_CRS180 3/27/14 11:45 AM Page 5
-6-
This symbol designates that this tool is listed by Underwriters Laboratories.
This symbol designates that this tool is listed by the Canadian Standards
Association.
This symbol designates that this tool is listed by the Canadian Standards
Association, to United States and Canadian Standards.
This symbol designates that this tool complies to NOM Mexican Standards.
This symbol designates that this tool is listed by the Intertek Testing
Services, to United States and Canadian Standards.
<0%2/6&217,18('
Some of the following symbols may be used on your tool. Please study them
and learn their meaning. Proper interpretation of these symbols will allow you to operate the
tool better and safer.
This symbol designates that this component is recognized by Underwriters
Laboratories.
This symbol designates that this tool is listed by Underwriters Laboratories,
to United States and Canadian Standards.
2610034440 03-14_CRS180 3/27/14 11:45 AM Page 6
2'(/80%(5
Voltage Rating 18 V
Stroke Length 1-1/8" (28 mm)
Strokes Per Minute n
0
0-2,400/min
Strokes Per Minute n
0
0-2,700/min
-7-
81&7,21$/(6&5,37,21$1'3(&,),&$7,216
,6&211(&7%$77(5<3$&. )520 722/ %()25( 0$.,1* $1< $66(0%/<
$'-8670(176 25 &+$1*,1*$&&(6625,(6. Such preventive safety measures
reduce the risk of starting the tool accidentally.
!
WARNING
FIG. 1
25'/(66(&,352&$7,1*$:
BATTERY
PACK
RUBBER
BOOT
SAW BLADE
PIVOTING
FOOTPLATE
LockJaw™
BLADE HOLDER
VARIABLE SPEED
CONTROLLED
TRIGGER
RUBBERIZED
SOFT GRIP
VENTILATION
OPENINGS
DUAL SPEED
SELECTOR SWITCH
& TRIGGER LOCK
BATTERY PACK
RELEASE BUTTON
$77(5<$&.6+$5*(56
Please refer to the Charger Manual included with your tool.
For tool specifications refer to the nameplate on your tool.
2610034440 03-14_CRS180 3/27/14 11:45 AM Page 7
5(3$5,1*7+($:
No one blade can be efficient on all cutting
jobs. Different materials require specially
designed blades. Since your reciprocating
saw can cut so many materials, many types of
BOSCH blades are available. Be sure to use
the proper blade to insure proper cutting
performance.
,6&211(&7%$77(5<3$&.
)520 722/ %()25(0$.,1*
$1< $66(0%/<$'-8670(176 25 &+$1*,1*
$&&(6625,(6.
1. Insert the blade into the LockJaw™ blade
holder until the locking collar automatically
rotates clockwise and locks the blade in place
(Fig. 2). 27( if the blade will not lock
automatically, rotate the locking collar counter-
clockwise until it clicks and locks in the open
position (Fig. 3).
2 Push in and pull out on the blade to be sure
the pin in the clamp housing goes through the
hole in the blade to hold the blade securely.
The blade may be inserted with the teeth
facing down or up.
3. To remove the blade, rotate the locking
collar counter-clockwise and the blade will
automatically eject from the LockJaw™ blade
holder and lock the collar in the open position.
$.(685(7+$77+()5217(1'
2)7+(%/$'((;7(1'67+528*+
7+()2273/$7()257+((17,5(6752.(/(1*7+ Do
not use specialty blades that are very short or
those with a significant cant. Blade must not
contact footplate. A blade which is too short or
canted could jam inside the foot and snap.
-8-
3(5$7,1*16758&7,216
!
"
Your tool is equipped with a variable speed
controlled trigger switch. The tool can be
turned "ON" or "OFF" by squeezing or
releasing the trigger. The blade plunger stroke
rate can be adjusted from the minimum to
maximum nameplate stroke rate by the
pressure you apply to the trigger. Apply more
pressure to increase the speed and release
pressure to decrease speed (Fig. 1).
To reduce the risk of injury
immediately discontinue use
of the tool if the variable speed control ceases
to function. Subsequent loss of on/off control
of the trigger switch is likely.
Higher speed settings are generally used for
fast cutting or when softer cutting materials
such as wood, composite materials, and
plastics. Slower speed settings are generally
used when precision is required or when
cutting harder materials. Materials typically cut
using slower speeds include sheet metal,
conduit, and pipe.
!
WARNING
!
WARNING
66(0%/<
FIG. 3
FIG. 2
Open
Position
LockJaw™
BLADE HOLDER
LOCKING
COLLAR
BLADE
LOCKING COLLAR
!
WARNING
2610034440 03-14_CRS180 3/27/14 11:45 AM Page 8
"
The stroke speed setting of the power tool can
be changed with the stroke speed selector
switch. However, this is not possible when the
On/Off switch is pressed.
752.(63(('6(/(&725 6:,7&+>&(175$/
326,7,21
The safety lock is activated.
The On/Off switch is blocked and
the machine is secured against
being switched on unintentionally.
752.(63(('6(/(&7256:,7&+>/()7
1. Low stroke speed.
The low stroke speed is suitable for
s
awing hard materials such as
steel, non-ferrous metal, hard
plastics or for precision cuts in
wood and plunge cutting.
The low stroke speed enables sawing with less
vibrations.
752.(63(('6(/(&7256:,7&+>5,*+7
2. High stroke speed.
The high stroke speed is suitable
for sawing soft materials.
The high stroke speed enables
quicker operational progress, e. g.,
for coarse cuts in wood.
-9-
6,1*7+($:
1. Securely clamp the work.
2. Mark the line of cut and grasp the tool with
one hand on the handle and the other
placed on the insulated rubber boot over
the front housing.
/:$<6 23(5$7( 7+( 6$:
:,7+ 7+(,168/$7(' %227 21
7+()5217+286,1* If you saw into a blind area
where live wiring exists, you may be shocked
or electrocuted.
3. Keep the saw footplate firmly against the
work to minimize counter-force (jumping)
and vibration.
4. Squeeze the trigger to start the tool. Let the
saw reach full speed before starting the cut.
Guide the saw so that the blade will move
along the marked line.
"
Following a few simple tips will reduce the
wear on the workpiece, the tool and the
operator.
1. Blades cut on the draw or back stroke. On
fine work, such as paneling, fiberglass, etc.,
place the good side of workpiece facing
down.
2. Use the correct saw blade for the material
being cut and keep extra blades on hand to
use when others become dull. Replace
cracked or bent blades immediately.
3. Select the footplate projection settings, as
well as the appropriate cutting speed.
4. To reduce the risk of injury, be sure the
blade always extends beyond the footplate
and work throughout the stroke. Blades
may shatter if the front on the blade hits the
work and/or the footplate.
5. When cutting metal:
- Apply a lubricant for easier, smoother,
faster cutting and longer blade life.
- For non-ferrous metals, aluminum,
bronze or brass, use a stick wax on the
blade.
- For ferrous metals, iron and steel, use
machine or cutting oil along the surface
to be cut.
6. When cutting thin metal, "sandwich" the
material between two pieces of scrap wood.
Clamp or put in a bench vise. One piece of
lumber on top of the metal can be used with
adequate clamping. Place your cut lines or
design on the wood.
7. Don’t force the cutting. Let the saw and
blade do the work.
!
WARNING
"
2610034440 03-14_CRS180 3/27/14 11:45 AM Page 9
Set Forward/Reversing lever to the center (off
position). Slide charged battery pack into the
housing until the battery pack locks into
position (Fig. 1).
Your battery pack is equipped with a
secondary locking latch to prevent the battery
pack from completely falling out of the handle,
should it become loose due to vibration.
To remove the battery pack, press the battery
pack release button and slide the battery pack
forward. Press the battery pack release button
again and slide the battery pack completely out
of tool housing.
-10-
The reciprocating saw can be used to make
plunge cuts into softer material, (for example,
wood or light building materials for walls),
without a starting hole (Fig. 4).
1. Mark the line to be cut clearly on the work.
2. Set the tool with one edge of the footplate
firmly against the material.
3. Place the tip of the blade (not running) on the
line to be cut.
4. Tilt the saw so that the blade clears the work.
5. Squeeze the trigger switch and carefully
engage the moving saw blade into the material.
6. After the blade penetrates through the work,
continue sawing along the marked outline.
To make plunge cutting easier, use a heavy
gauge blade, install the blade with the teeth
facing upward, and hold the saw upside down
as shown (Fig. 5).
Do not plunge cut in metal surfaces.
In thick materials and in harder materials,
such as metal, plunge cutting should not be
attempted. Such materials can be cut with the
recip saw only by starting the cut from the
edge of the material or from a hole drilled all
the way through the material that is large
enough to fit the saw blade.
+(86(2)$1<$&&(6625,(6
12763(&,),(',17+,60$18$/
0$<&5($7($+$=$5'
!
WARNING
#
FIG. 4
FIG. 5
2610034440 03-14_CRS180 3/27/14 11:45 AM Page 10
-11-
$,17(1$1&(
(59,&(
!
5(9(17,9(
0$,17(1$1&( 3(5)250('%<81$87+25,=('
3(56211(/ 0$< 5(68/7 ,1 0,63/$&,1* 2)
,17(51$/:,5(6 $1' &20321(176 :+,&+
&28/' &$86( 6(5,286 +$=$5' We recom -
mend that all tool service be performed by a
Bosch Factory Service Center or Authorized
Bosch Service Station. SERVICE MEN:
Disconnect tool and/or charger from power
source before servicing.
($/(57)25%$77(5<3$&.67+$7$5(1($5,1*
7+(,5 (1' 2) /,)( If you notice decreased
tool performance or significantly shorter
running time between charges then it is time
to replace the battery pack. Failure to do so
can cause the tool to operate improperly or
damage the charger.
Your Bosch tool has been properly lubricated
and is ready for use.
The motor in your tool has been engineered
for many hours of dependable service. To
maintain peak efficiency of the motor, we
recommend it be examined every six
months. Only a genuine Bosch replacement
motor specially designed for your tool should
be used.
Bearings which become noisy (due to heavy
load or very abrasive material cutting) should
be replaced at once to avoid overheating and
motor failure.
/($1,1*
2$92,' $&&,'(176$/:$<6
',6&211(&77+( 722/ $1'25
&+$5*(5 )5207+(32:(56833/< %()25(
&/($1,1* The tool may be cleaned most
effectively with com pressed dry air. /:$<6
:($5 6$)(7<*2**/(6 :+(1&/($1,1* 722/6
:,7+&2035(66('$,5
Ventilation openings and switch levers must be
kept clean and free of foreign matter. Do not
attempt to clean by inserting pointed objects
through opening.
2&.$:™
Use dry compressed air to clean dust and
debris from the LockJaw™ blade holder
assembly on a regular basis.
Periodically lubricate LockJaw™ blade
holder with a dry lubricant such as graphite.
(57$,1&/($1,1* $*(176
$1' 62/9(176 '$0$*(
3/$67,&3$576 Some of these are: gasoline,
car bon tetrachloride, chlorinated cleaning
solvents, ammonia and household detergents
that contain ammonia.
!
WARNING
!
WARNING
!
CAUTION
2610034440 03-14_CRS180 3/27/14 11:45 AM Page 11
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
2610034440 03/14
L
IMITED WARRANTY OF BOSCH PORTABLE AND BENCHTOP POWER TOOLS
Robert Bosch Tool Corporation (“Seller”) warrants to the original purchaser only, that all BOSCH portable and benchtop power tools will be free from
defects in material or workmanship for a period of one year from date of purchase. SELLER’S SOLE OBLIGATION AND YOUR EXCLUSIVE REMEDY
u
nder this Limited Warranty and, to the extent permitted by law, any warranty or condition implied by law, shall be the repair or replacement of parts,
without charge, which are defective in material or workmanship and which have not been misused, carelessly handled, or misrepaired by persons
other than Seller or Authorized Service Station. To make a claim under this Limited Warranty, you must return the complete portable or benchtop
p
ower tool product, transportation prepaid, to any BOSCH Factory Service Center or Authorized Service Station. For Authorized BOSCH Power Tool
Service Stations, please refer to your phone directory.
T
HIS LIMITED WARRANTY DOES NOT APPLY TO ACCESSORY ITEMS SUCH AS CIRCULAR SAW BLADES, DRILL BITS, ROUTER BITS, JIGSAW
BLADES, SANDING BELTS, GRINDING WHEELS AND OTHER RELATED ITEMS.
ANY IMPLIED WARRANTIES SHALL BE LIMITED IN DURATION TO ONE YEAR FROM DATE OF PURCHASE. SOME STATES IN THE U.S., SOME
CANADIAN PRO V INCES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT
A
PPLY TO YOU.
I
N NO EVENT SHALL SELLER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING BUT NOT LIMITED TO LIABILITY
FOR LOSS OF PROFITS) ARISING FROM THE SALE OR USE OF THIS PRODUCT. SOME STATES IN THE U.S. AND SOME CANADIAN PROVINCES
D
O NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR
EXCLUSION MAY NOT APPLY TO YOU.
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO
S
TATE IN THE U.S., PROVINCE TO PROVINCE IN CANADA AND FROM COUNTRY TO COUNTRY.
T
HIS LIMITED WARRANTY APPLIES ONLY TO PORTABLE AND BENCHTOP ELECTRIC TOOLS SOLD WITHIN THE UNITED STATES OF AMERICA,
CANADA AND THE COMMONWEALTH OF PUERTO RICO. FOR WARRANTY COVERAGE WITHIN OTHER COUNTRIES, CONTACT YOUR LOCAL
BOSCH DEALER OR IMPORTER.
GARANTIE LIMITÉE DES OUTILS ÉLECTRIQUES PORTATIFS ET D'ÉTABLI BOSCH
Robert Bosch Tool Corporation (le « vendeur ») garantit à l'acheteur initial seulement que tous les outils électriques portatifs et d'établi BOSCH
s
eront exempts de vices de matériaux ou d'exécution pendant une période d'un an depuis la date d'achat. LA SEULE OBLIGATION DU VENDEUR ET
LE SEUL RECOURS DE L’ACHETEUR sous la présente garantie limitée, et en autant que la loi le permette sous toute garantie ou condition implicite
qui en découlerait, sera l’obligation de remplacer ou réparer gratuitement les pièces défectueuses matériellement ou comme fabrication, pourvu que
l
esdites défectuosités ne soient pas attribuables à un usage abusif ou à quelque réparation bricolée par quelqu’un d’autre que le vendeur ou le
personnel d’une station-service agréée. Pour présenter une réclamation en vertu de cette garantie limitée, vous devez renvoyer l'outil électrique
portatif ou d'établi complet, port payé, à tout centre de service agréé ou centre de service usine. Veuillez consulter votre annuaire téléphonique
p
our les adresses.
LA PRÉSENTE GARANTIE NE S’APPLIQUE PAS AUX ACCESSOIRES TELS QUE LAMES DE SCIES CIRCULAIRES, MÈCHES DE PERCEUSES, FERS
DE TOUPIES, LAMES DE SCIES SAUTEUSES, COURROIES DE PONÇAGE, MEULES ET AUTRES ARTICLES DU GENRE.
TOUTE GARANTIE IMPLICITE SERA LIMITÉE COMME DURÉE À UN AN À COMPTER DE LA DATE D’ACHAT. CERTAINS ÉTATS AMÉRICAINS,
CERTAINES PROVINCES CANADIENNES N’ADMETTANT PAS LE PRINCIPE DE LA LIMITATION DE LA DURÉE DES GARANTIES IMPLICITES, IL
EST POSSIBLE QUE LES LIMITATIONS CI-DESSUS NE S’APPLIQUENT PAS À VOTRE CAS.
EN AUCUN CAS LE VENDEUR NE SAURAIT ÊTRE TENU POUR RESPONSABLE DES INCIDENTS OU DOMMAGES INDIRECTS (INCLUANT, MAIS NE
SE LIMITANT PAS AUX PERTES DE PROFITS) CONSÉCUTIFS À LA VENTE OU L’USAGE DE CE PRODUIT. CERTAINS ÉTATS AMÉRICAINS ET
CERTAINES PROVINCES CANADIENNES N’ADMETTANT PAS LE PRINCIPE DE LA LIMITATION NI L’EXCLUSION DES DOMMAGES INDIRECTS ET
CONSÉQUENTIELS, IL EST POSSIBLE QUE LES LIMITATIONS OU EXCLUSIONS CI-DESSUS NE S’APPLIQUENT PAS À VOTRE CAS.
LA PRÉSENTE GARANTIE VOUS ACCORDE DES DROITS BIEN DÉTERMINÉS, Y COMPRIS POSSIBLEMENT CERTAINS DROITS VARIABLES DANS
LES DIFFÉRENTS ÉTATS AMÉRICAINS, PROVINCES CANADIENNE ET DE PAYS À PAYS.
CETTE GARANTIE LIMITÉE NE S'APPLIQUE QU'AUX OUTILS ÉLECTRIQUES PORTATIFS ET D'ÉTABLI VENDUS AUX ÉTATS-UNIS D'AMÉRIQUE,
AU CANADA ET AU COMMONWEALTH DE PORTO RICO. POUR COUVERTURE DE GARANTIE DANS LES AUTRES PAYS, CONTACTEZ VOTRE
IMPORTATEUR OU REVENDEUR BOSCH LOCAL.
GARANTIA LIMITADA PARA HERRAMIENTAS MECANICAS PORTATILES Y PARA TABLERO DE BANCO BOSCH
Robert Bosch Tool Corporation ("el Vendedor") garantiza, únicamente al comprador original, que todas las herramientas mecánicas portátiles y
para tablero de banco BOSCH estarán libres de defectos de material o de fabricación durante un período de un año a partir de la fecha de compra.
LA UNICA OBLIGACION DEL VENDEDOR Y EL RECURSO EXCLUSIVO QUE USTED TIENE bajo esta Garantía Limitada y, hasta donde la ley lo
permita, bajo cualquier garantía o condición implícita por ley, consistirá en la reparación o sustitución sin costo de las piezas que presenten
defectos de material o de fabricación y que no hayan sido utilizadas inco rrectamente, manejadas descuidadamente o reparadas incorrectamente
por personas que no sean el Vendedor o una Estación de servicio autorizada. Para efectuar una reclamación bajo esta Garantía Limitada, usted
debe devolver el producto, que consiste en la herramienta mecánica portátil o para tablero de banco completa, con el transporte pagado, a
cualquier Centro de servicio de fábrica o Estación de servicio autorizada. Para Estaciones de servicio autorizadas de herramientas mecánicas
BOSCH, por favor, consulte el directorio telefónico.
ESTA GARANTIA LIMITADA NO SE APLICA A ARTICULOS ACCESORIOS TALES COMO HOJAS PARA SIERRAS CIRCULARES, BROCAS PARA
TALADROS, BROCAS PARA FRESADORAS, HOJAS PARA SIERRAS DE VAIVEN, CORREAS PARA LIJAR, RUEDAS DE AMOLAR Y OTROS
ARTICULOS RELACIONADOS.
TODAS LAS GARANTIAS IMPLICITAS TENDRAN UNA DURACION LIMITADA A UN AÑO A PARTIR DE LA FECHA DE COMPRA. ALGUNOS
ESTADOS DE LOS EE.UU. Y ALGUNAS PROVINCIAS CANADIENSES NO PERMITEN LIMITACIONES EN CUANTO A LA DURACION DE UNA
GARANTIA IMPLICITA, POR LO QUE ES POSIBLE QUE LA LIMITACION ANTERIOR NO SEA APLICABLE EN EL CASO DE USTED.
EL VENDEDOR NO SERA RESPONSABLE EN NINGUN CASO DE NINGUN DAÑO INCIDENTAL O EMERGENTE (INCLUYENDO PERO NO LIMITADO
A RESPONSABILIDAD POR PERDIDA DE BENEFICIOS) QUE SE PRODUZCA COMO CONSECUENCIA DE LA VENTA O UTILIZACION DE ESTE
PRODUCTO. ALGUNOS ESTADOS DE LOS EE.UU. Y ALGUNAS PROVINCIAS CANADIENSES NO PERMITEN LA EXCLUSION O LIMITACION DE
LOS DAÑOS INCIDENTALES O EMERGENTES, POR LO QUE ES POSIBLE QUE LA LIMITACION O EXCLUSION ANTERIOR NO SEA APLICABLE EN
EL CASO DE USTED.
ESTA GARANTIA LIMITADA LE CONFIERE A USTED DERECHOS LEGALES ESPECIFICOS Y ES POSIBLE QUE USTED TAMBIEN TENGA OTROS
DERECHOS QUE VARIAN DE ESTADO A ESTADO EN LOS EE.UU., DE PROVINCIA A PROVINCIA EN CANADA Y DE UN PAIS A OTRO.
ESTA GARANTIA LIMITADA SE APLICA SOLAMENTE A HERRAMIENTAS ELECTRICAS PORTATILES Y PARA TABLERO DE BANCO VENDIDAS EN
LOS ESTADOS UNIDOS DE AMERICA, CANADA Y EL ESTADO LIBRE ASOCIADO DE PUERTO RICO. PARA COBERTURA DE GARANTIA EN OTROS
PAISES, PONGASE EN CONTACTO CON SU DISTRIBUIDOR O IMPORTADOR LOCAL DE BOSCH.
© Robert Bosch Tool Corporation 1800 W. Central Road Mt. Prospect, IL 60056-2230
Exportado por: Robert Bosch Tool Corporation Mt. Prospect, IL 60056-2230, E.U.A.
Importado en México por: Robert Bosch, S.A. de C.V., Calle Robert Bosch No. 405, Zona
Industrial, Toluca, Edo. de México, C.P. 50070, Tel. (722) 2792300
!2610034440!
2610034440 03-14_CRS180 3/27/14 11:45 AM Page 32
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
Bosch Power Tools CRS180K User manual
- Category
- Power tools
- Type
- User manual
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
in other languages
Related papers
-
Bosch Power Tools CRS180B User manual
-
-
-
-
Bosch Power Tools CRS180B User manual
-
-
-
-
-