1. With the blending attachment in place, plug the appliance into a standard
electrical outlet.
2. Adjust to the desired speed by turning the speed control dial on top of the
motor body.
3. Insertthehandblenderintothemixturetobeblended;besurethebladeis
below the surface of the food. Use your other hand to hold the pot, pan, bowl
or beaker in place.
Important: If pureeing or blending hot foods, remove from the burner and allow
the food to cool for a few minutes before using the blender in the hot mixture.
Caution: Keep electrical cord away from any heat source.
Note: Do not immerse the blender into any mixture that comes above the seam
of the blending attachment. Do not immerse the motor body into any liquid
or food mixture.
4. Press the POWER button (H).
5. Use a circular motion to move the appliance
around the mixture. Use an up and down motion to
blend all the ingredients.
Important: To avoid splashing, always keep the
blades below the surface of the mixture.
6. When blending is complete, release the POWER
button. Wait for the blades to stop rotating. Lift the
hand blender from the mixture.
7. Unplug the appliance before removing the blending attachment or changing to
another attachment.
Important: The blades are extremely sharp. Use caution when handling.
Using the Whisk Attachment
This attachment is used for whipping cream, beating eggs and egg whites and
mixing sauces and puddings.
1. With the whisk attachment in place, plug the appliance into a standard
electrical outlet.
2. Adjust to the desired speed by turning the speed control dial on top of the
motor body.
Tip: When using this attachment, it is better to start at a lower speed and
gradually increase as the mixture begins to thicken.
3. Insert the whisk into the mixture to be blended. Use other hand to hold the
cooking bowl or measuring cup in place.
Note: Do not immerse the blender into any mixture that comes above the seam
of the whisk attachment. Do not immerse the motor body into any liquid or food
mixture.
4. Press the POWER button.
5. Use a circular motion to move the appliance around the mixture. Use an up
and down motion to blend all the ingredients and obtain a smooth mixture.
Important: To avoid splashing, always keep the whisk below the surface of the
mixture.
H
6. When blending is complete, release the POWER
button. Wait for the whisk
to stop rotating. Lift the hand blender from the mixture.
7. Unplug the appliance before removing the whisk attachment or changing to
another attachment.
Using the Chopping Workbowl
1. Place the workbowl on a flat surface or countertop.
2. Follow directions above in assembling the workbowl and blade, placing food to
be processed in the workbowl as you assemble.
3. Use one hand to hold the workbowl in place by the handle. With the other
hand press the POWER
button for 5 to 10 seconds at a time. Allow blades to
come to complete stop before pressing the POWER button again. Process
until mixture has achieved the desired consistency.
4. To stop the appliance, release the POWER button.
5. Waitforthebladestostoprotating.Liftoffthemotorbodyandremovethelid;
remove the blade by the center post.
Important: The chopping blades are extremely sharp. Use caution when
handling.
Important: Do not operate without having food in the workbowl.
6. Using a rubber spatula, remove food from the workbowl.
7. Unplug appliance when not is use.