2. Phoenix Gold
  3. ZDSB200S
ZDSB200S

Phoenix Gold ZDSB200S User manual

  • Hello! I've reviewed the user manual for the Phoenix Gold ZD series ZDSB200S woofer installation. This document provides a step-by-step guide for installing the woofer in a BMW 3-Series 2018 (F30). The guide includes details about the necessary tools and the process of removing the existing speaker and fitting the new one. I'm ready to answer any questions you might have about the installation process or the features of the ZDSB200S woofer.
  • What vehicle is this installation guide for?
    What tools are required for the installation?
    Is it necessary to use a lot of force to remove the old woofer?
    What is the first step of the installation?
1
ZDSB200S
Installation Tools Required
2
T20 Screwdriver T50 Ratchet Shaft Pry Tool
Vehicle used for installation:*
BMW 3-Series 2018 (F30)
Basic Sound System
*Some differences may occur between different car and
year models.
10mm Wrench / Socket Drill (3mm)
ZDSB200S Installation 1
Tools required:
3
1. Unscrew the front seat bolts 2. Close-up on the bolt
3. Unscrew the two bolts on the back 4. Tilt the chair back
1x T50 Ratchet Shaft
ZDSB200S Installation 2
Tools required:
4
5. Unscrew the woofer grill 6. OEM Woofer
7. Remove the threshold (pull up) 8. Threshold removed
1x T20 Screwdriver
ZDSB200S Installation 3
Tools required:
5
9. Lift up the carpet 10. Unscrew the two bolts
11. Bolts unscrewed 12. Loosen the cable clips (pull)
1x 10mm Wrench / Socket
ZDSB200S Installation 4
Tools required:
6
13. Disconnect the speaker connector 14. Remove the woofer
15. Remove the woofer from the plastic 16. Use A LOT of force to remove it
1x Pry Tool
ZDSB200S Installation 5
Tools required:
7
17. Pull it up all the way around 18. Woofer removed from the enclosure
19. Drill holes for the woofer 20. Screw the woofer in place
1x PH2 Screwdriver
1x Drill 3mm
ZDSB200S Installation 6
Tools required:
8
21. Mount the woofer in the car 22. Screw it in place
23. Screwed in place 24. Connect the speaker connector
1x 10mm Wrench / Socket 1x T50 Ratchet Shaft
ZDSB200S Installation 7
Tools required:
9
25. Screw back the woofer grill 26. Put the chair back down
27. Screw back the four chair bolts 28. Installation is now complete
1x T20 Screwdriver
1x T50 Ratchet Shaft
10
On Behalf of the Phoenix Gold team,
Thank you for choosing us!
Your installation is complete and we hope that your new
upgraded system will bring you joy and happiness for many
years to come when listening to your favorite music. As
always, our goal is bringing you The Gold Standard in Sound.
www.phoenixgold-eu.com
/