2. Dometic
  3. AE Systems Top Adapter Kit 4.88 Radius Two Step Awning 3108907.027

Dometic AE Systems Top Adapter Kit 4.88 Radius Two Step Awning 3108907.027 Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Dometic AE Systems Top Adapter Kit 4.88 Radius Two Step Awning 3108907.027 Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Form No. 3109951.008 8/01
(French 3307678.007)
© 2001 Dometic Corporation
LaGrange, IN 46761
Installation Instructions
Kit, Top Adapter 4.88 Radius Two Step Awning
Part No. 3108907.027
For 76000XX.400 Hardware
This Kit Contains:
2 - 3108907.035 Adapter, Top 4.88" Radius
4 - 3108708.094 1/2" Foam Spacer
2 - 3109506.109 Spacer, Bottom Bracket
4 - 3104499.045 Screw, S14-10 x 1" HHW
4 - 3104176.072 Screw, Hexcap 1/4-20 x 2.5" SS
4 - 317534.006 Nut, Lock w/Insert 1/4-20 SS
1 - 3109951.008 Installation Instructions
Important: Read and understand all of the following
steps before beginning installation.
This kit is designed to fit a 4.88" side wall radius for the top
mounting bracket and will space the hardware 1/2" from side
wall. Follow the installation instructions provided with the hard-
ware and add the following steps:
1. Before installing hardware, mount the 4.88" radius top
adapter to the top mounting bracket using the 2" x 1/4-20
screws and 1/4-20 lock nut provided with this kit.
2. Place two foam spacers on each back channel at posi-
tions shown in FIG. 1. Bottom spacer will be located at
bottom of back channel. Middle spacer will be located
directly behind strut bracket pin.
3. With the top radius adapter secured on the top mounting
bracket,hold the arm assembly at desired position and
mark location of holes in top adapter. Secure top adapter
to side wall using two (2) 1" x S14-10 screws provided
with this kit.
Important: Structural backing is required where mount-
ing screws will be installed through side wall for secur-
ing top adapter.
4. Before securing the bottom mounting bracket to side wall,
place one bottom bracket stand off in position as shown
in FIG. 1. Use the 2-3/4" upper bracket screws supplied
with hardware.
FIG. 1
1/4 x 20
Lock Nut
Top Adapter
Middle
Spacer
Bottom
Bracket
Stand off
Channel
Extension
Strut
Bracket Pin
Bottom
Spacer
Top Mounting
Bracket
Bottom Mounting
Bracket
1 x S14-10”
2.5 x 1/4-20”
2-3/4 Screws”
Back
Channel
5. Place cover plate supplied with hardware on bottom mount-
ing bracket. Repeat on opposite side .
/