2. GGM Gastro
  3. STK106BL1

GGM Gastro STK106BL1 Owner's manual

  • Hello! I have reviewed the user manual for the Sink STK167BL2. The document details the steps for assembling the sink, from installing the legs and shelf to mounting the panels and drain pipe. I'm ready to answer any questions you may have about the installation process or the sink's features.
  • What tools are needed for the installation?
    How many screws should be used to tighten the panels?
    What are the first steps?
Sink installation Manual
STK167BL2
1. Sink carton
Step one :Under shelf and legs
Stop one
Tools Needed：
(1)Screw M8*40
(2)Small wrench
(3)Washer
Step One :
Please assemble the
legs and lower as per
the picture left.
Step one : 4 legs should be installed with
under shelf.
Step one :Please put the product in this way.
Step 02 :Please install the left and right panel
on the legs.
Step 02 :After install the left and right panel, then install the
front and back panel.Please use a small wrench to tighten 10
screws of M6.
Stop 02:Install all the panel .(one left panel,one
right panel,one front panel and two back
panel )Please use a small wrench to tighten 10
screws of M6.
Step 03 :Install sink top
Step 03 :
Please reverse
the product.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/