Samsung HL-S6767W User manual

Owner’s Instructions

HL-S6167W

HL-S6767W

This device is a Class B digital apparatus.

Register your product at www.samsung.com/global/register

BP68-00588G-00Eng(cover) 4/22/06 2:06 PM Page 3

English - 2

A Guide to Digital TV

• What is Digital Television?

Digital television (DTV) is a new way of transmitting high quality video and audio to your TV set.

Using DTV, broadcasters can transmit high definition TV (HDTV) images, Dolby digital surround

audio, and new services such as multicasting (transmitting more than one program on the same

TV channel) and datacasting. Several of these services can be combined into a single digital

broadcast.

Digital Television Services

• Digital Picture Quality

DTV programs are transmitted in two different formats. The first is Standard Definition Television

(SDTV) and the second is High Definition Television (HDTV).

• SDTV program formats include 480-line interlaced (480i) and 480-line progressive (480p) video.

480i programs are essentially a digital version of our current analog TV programs, while the 480p

format offers improved image detail over 480i. Some 480p programs are broadcast in widescreen

and are comparable to progressive-scan DVD movies in image quality.

• HDTV program formats include 1080-line interlaced (1080i) and 720-line progressive (720p).

Both HDTV formats are always broadcast in widescreen, and offer much higher picture quality than

SDTV.

• Dolby Surround Sound

With DTV, you can listen to a variety of Dolby digital audio formats from Dolby Surround 2.0 to

Dolby Digital 5.1 surround, using your home audio system. Many HDTV programs are now

broadcast with DD 5.1 soundtracks.

BP68-00588G-01Eng(002~015) 5/12/06 5:54 PM Page 2

English - 3

Q&A

1. Is the antenna I use for existing TV reception good enough for DTV?

Over-the-air (OTA) digital TV broadcasting uses the same channels as analog TV and works well

with many existing TV antennas. However, DTV broadcast channel assignments are different than

analog channels. You should find out whether your local DTV broadcasts are on VHF (channels

2-13) or UHF (channels 14-69) to see if you need a different antenna.

If your DTV channels are on UHF and you already get good UHF reception, your present antenna

may work fine. The same holds true for VHF DTV reception. Note that in some markets, both VHF

and UHF channels are used for DTV broadcasts.

You can find out the latest DTV channel assignments for your area by browsing selected Internet

web sites such as www.titantv.com, www.10000watts.com, and www.fcc.gov.

2. How difficult is it to receive DTV signals indoors?

This depends on whether your local DTV stations are running full power or not and how close your

location is to the transmission tower. DTV receivers do not require as much signal as analog TV

receivers to produce high-quality images and sound.

Once the DTV signal level exceeds a certain threshold at the receiver, the digital video and audio

data is decoded at the same quality it was originally encoded for broadcast.

This is a big advantage for DTV over analog TV - there is no noise, ghosting, static, or scratchy

audio.

3. How can I connect an antenna in my townhouse, co-operative apartment,

condominium, or apartment?

The Federal Communications Commission’s OTARD Rule (part of the Telecommunications Act of

1996) allows residents of condominiums, townhouse, or members of neighborhood associations to

put up outside antennas for reception of broadcast TV signals as long as those antennas are not

located in common areas and are no more than 12’ in height.

Residents of rental units (apartments, etc.) are not covered by the OTARD rules and will have to use

indoor antennas to receive DTV broadcasts. It is possible that the landlord of an apartment complex

can provide broadcast DTV signals via a master TV antenna system to each apartment.

4. Can I connect my DTV set-top receiver to my cable TV service?

Cable TV systems use a different method for transmitting digital TV programs that is currently

incompatible with broadcast DTV set-top receivers. So you will still need to use an outdoor or

indoor antenna to receive OTA broadcast DTV programs.

The good news is that you won’t have to pay a monthly or per-program charge to watch OTA DTV

and HDTV programs. They’re free, unlike subscription satellite TV or premium cable TV. All you

need is an antenna and a DTV set-top receiver to enjoy clear, sharp widescreen images and

high-quality audio.

BP68-00588G-01Eng(002~015) 5/12/06 5:54 PM Page 3

Table of Contents

English - 4

Your New Wide TV...................................................................................8

Viewing Position ......................................................................................................8

List of Features.........................................................................................................9

Accessories .............................................................................................................9

Front Panel LED Indicators.......................................................................................10

Right side buttons...................................................................................................11

Side Panel Jacks ....................................................................................................11

Rear Panel Jacks....................................................................................................12

Remote Control......................................................................................................13

Connections ...........................................................................................16

Connecting VHF and UHF Antennas ........................................................................16

Antennas with 75-ohm Round Leads ..............................................................16

Connecting Cable TV .............................................................................................17

Cable without a Cable Box...........................................................................17

Cable with a Cable Box that Descrambles All Channels...................................17

Cable with a Cable Box that Descrambles Some (But Not All) Channels ............18

Connecting a VCR .................................................................................................19

Connecting a VCR to the Video or S-Video/Audio jack....................................19

Connecting a Camcorder .......................................................................................20

Connecting a DVD Player .......................................................................................21

Connecting to HDMI (High Definition Multimedia Interface) ..............................21

Connecting to Y, P

B, PR.................................................................................21

Connecting to Audio and Video Jacks............................................................22

Connecting a DTV Set-Top Box ................................................................................23

Connecting to Y, P

B, PR.................................................................................23

Connecting to DVI (Digital Visual Interface) ....................................................23

Connecting a VCR and DTV Set-Top Box ........................................................24

Connecting to HDMI (High Definition Multimedia Interface) ..............................24

Connecting a Digital Audio System..........................................................................25

Connecting to an Analog Amplifier..........................................................................26

Operation ..............................................................................................28

Turning the TV On and Off .....................................................................................28

Dynamic Menus and On-Screen Displays .................................................................28

Navigating Menus by Using the Menu Map .............................................................29

Selecting a Menu Language....................................................................................30

Memorizing Channels ............................................................................................31

Changing Channels ...............................................................................................33

Customizing Your Remote Control ............................................................................34

Remote Control Codes............................................................................................38

Setting the Clock....................................................................................................41

Setting the On/Off Timer........................................................................................43

Setting the Sleep Timer ...........................................................................................44

Viewing an External Signal Source ..........................................................................45

Assigning Names to External Input Mode .................................................................46

Channel Control .....................................................................................48

Selecting Your Favorite Channels .............................................................................48

Viewing the Channel Lists .......................................................................................49

Adding and Erasing Channels.................................................................................50

Labeling the Channels ............................................................................................51

Fine Tuning Analog Channels ........................................................................52

Checking the Digital-Signal Strength ..............................................................53

LNA (Low Noise Amplifier) .....................................................................................54

Digital

Analog

BP68-00588G-01Eng(002~015) 5/12/06 5:54 PM Page 4

English - 5

Picture Control........................................................................................56

Picture Control.......................................................................................................56

Changing the Picture Size.......................................................................................59

Digital Noise Reduction..........................................................................................60

DNIe (Digital Natural Image engine)........................................................................61

Setting the My Color Control Mode .........................................................................62

Using the Color Weakness Enhancement Feature.......................................................64

Setting the Film Mode ............................................................................................65

Freezing the Picture................................................................................................66

Setting the Blue Screen Mode..................................................................................67

Sound Control ........................................................................................70

Sound Control .......................................................................................................70

Setting up DNSe (Digital Natural Sound engine) .......................................................72

Auto Volume..........................................................................................................73

Choosing a Multi-Channel Sound (MTS) track .................................................74

Choosing a Multi-Channel Sound (MTS) track .................................................75

Selecting the Internal Mute......................................................................................76

Setting the On/Off Melody.....................................................................................77

Special Features .....................................................................................80

Setting the Function Help ........................................................................................80

Menu Transparency Level........................................................................................81

Using Game Mode ................................................................................................82

Using the V-Chip....................................................................................................83

Using the V-Chip for Digital channels .......................................................................93

Viewing Closed Captions (On-Screen Text Messages) ......................................95

Viewing Closed Captions (On-Screen Text Messages) ......................................97

PC Display ...........................................................................................100

Using Your TV as a Computer (PC) Display .............................................................100

Adjusting the Picture Quality .................................................................................103

Changing the Picture Position................................................................................104

Adjusting the Picture Quality and Position Automatically...........................................105

Changing the Picture Size (PC Mode) ....................................................................106

Viewing the Current Resolution..............................................................................107

Initializing the Picture Settings ...............................................................................108

Appendix.............................................................................................110

Replacing the Lamp..............................................................................................110

Troubleshooting ...................................................................................................112

Cleaning and Maintaining Your TV ........................................................................114

Using Your TV in Another Country .........................................................................114

Specifications ......................................................................................................115

Analog

Digital

BP68-00588G-01Eng(002~015) 5/12/06 5:54 PM Page 5

SAMSUNG

BP68-00588G-00Eng(002~015) 4/22/06 2:01 PM Page 6

Your New Wide TV

BP68-00588G-00Eng(002~015) 4/22/06 2:01 PM Page 7

Viewing Position

To optimize your viewing comfort, please follow the guidelines below for viewing distance.

If viewing for an extended period of time, sit as far back from the screen as possible.

Your New Wide TV

English - 8

When installing the product, make sure to keep

it away from the wall (more than 10cm/4 inches)

for ventilation purposes.

• Poor ventilation may cause an increase in the

internal temperature of the product, resulting

in a shortened component life and degraded

performance.

BP68-00588G-00Eng(002~015) 4/22/06 2:01 PM Page 8

English - 9

List of Features

Your TV is designed and engineered using the latest technology. It is a full-featured, high-performance

unit that exceeds industry standards. In addition, it has these special features:

• Easy-to-operate remote control

• Dynamic menus and Navigating menus by using the menu map

• Easy-to-use on-screen menu system you can access from the right side buttons or remote control

• Automatic timer to turn the TV on and off at any time you choose

• Adjustable picture and sound settings and the ability to memorize your favorite settings

• Automatic channel tuning for up to 181 channels

• A special filter to reduce or eliminate reception problems

• Fine tuning control for the sharpest picture possible

• A built-in multi-channel sound decoder for stereo and bilingual listening

• Built-in, dual channel speakers

• A special sleep timer

• Widescreen TV with adjustable image size

• Life-like clear images provided by DNle technology

• My Color Control mode to correspond with your color preference

• Color Weakness Enhancement Feature

• Digital Input jack

• Digital Audio Output (OPTICAL) jack

• Game mode

• Easy-to-use channel manager menu.

Accessories

Once you have unpacked your TV, check to make sure that you have all the parts shown here.

If any piece is missing or broken, call your dealer.

Cloth-Clean

Warranty Card/

Registration Card/

Safety Guide Manual/

Quick Guide Manual/

Remote Control

(BP59-00116A)/

AAA Batteries

Owner’s Instructions Power Cord

(3903-000144)

BP68-00588G-01Eng(002~015) 5/12/06 5:54 PM Page 9

Your New Wide TV

English - 10

Front Panel LED Indicators

The three lights on the front panel indicate the status of your TV.

The product color and shape may vary depending on the model.

Indicator Light Key

TIMER

Standby state.

The picture will automatically appear in about 15 seconds.

Auto Timer ON/OFF has been set and the set will automatically be

turned on in about 15 seconds.

A cooling fan inside the set is not operating normally.

Lamp cover on the rear of the set is not properly shut.

Check if the ventilation hole on the rear of the set is blocked, because

if the inner temperature is too high, the power will shut off.

Lamp may be defective. Please contact a certified technician.

LAMP STAND BY/TEMP Indication

: Light is On

: Light is Blinking

: Light is Off

• It takes about 30 seconds for the TV to warm up, so normal brightness may not appear immediately.

• The TV has a fan to keep the inside lamp from overheating. You’ll occasionally hear it working.

Remote Control Sensor

Aim the remote control towards this spot on the TV.

POWER

Press to turn the TV on and off.

BP68-00588G-01Eng(002~015) 5/8/06 5:51 PM Page 10

English - 11

Right Side Buttons

The buttons on the right side panel control your TV’s basic features, including the on-screen menu system.

To use the more advanced features, you must use the remote control.

The product color and shape may vary depending on the model.

Press to switch between viewing TV programs and signals from connected components.

Press to see the on-screen menu.

Press to raise or lower the volume and to select items when using the on-screen menu.

Press to change channels and move between items on the on-screen menu.

Press to activate (or change) a particular item.

Side Panel Jacks

Use the right side panel jacks to connect a component that is used only occasionally (a camcorder or

video game, for example).

The product color and shape may vary depending on the model.

Connect the video signal from a camcorder or video game.

Connect the audio signal from a camcorder or video game.

Connect an S-Video signal from a camcorder or video game.

(S-Video 3 jack and Audio L/R input 3 are used in conjunction.)

BP68-00588G-01Eng(002~015) 5/12/06 5:55 PM Page 11

Your New Wide TV

English - 12

Rear Panel Jacks

Œ

VIDEO/AUDIO INPUT jacks

Connect video/audio signals from external sources, such as VCR

or DVD players. (Refer to pages 19, 22, and 24)

´

S-VIDEO INPUT jacks

Connects an S-Video signal from an S-VHS VCR or DVD player.

(Refer to pages 19, and 24)

ˇ

VIDEO/AUDIO OUTPUT jacks

Sends video/audio signals from the TV to an external source,

such as a VCR. These jacks are available only in TV, Video and

S-Video modes. (Refer to page 24)

¨

COMPONENT IN 1, 2 jacks (Y, PB, PR, AUDIO L/R)

Use these jacks to connect the component video/audio signals

from a DVD player or a Set-Top Box. (Refer to pages 21 and 23)

ˆ

PC VIDEO INPUT jack

Connect to the video output jack on your PC.

Ø

PC AUDIO INPUT jack

Connect to the audio output jack on your PC.

(Refer to page 100)

∏

HDMI (High Definition Multimedia Interface)

INPUT jacks (HDMI IN 2)

Connect to the HDMI jack of a device with HDMI output.

”

HDMI (High Definition Multimedia Interface)/

DVI INPUT jack (HDMI IN 1/DVI IN)

Connect to the HDMI jack of a device with HDMI output.

This input can also be used as a DVI connection with separate

analog audio inputs. An optional HDMI/DVI cable will be

necessary to make this connection. When using the optional

HDMI/DVI adapter, the DVI analog audio inputs on your TV allow

you to receive left and right audio from your DVI device.

(Not compatible with PC) (Refer to pages 21 and 23)

’

DVI AUDIO (L/R) IN

Connect to the DVI audio output jack of an external device.

(Refer to page 23)

˝

DIGITAL AUDIO OUT (OPTICAL) jack

Connect to a Digital Audio Component. (Refer to page 25)

Ô

RS232C

For service only.



SERVICE

This jack is for service only.

Ò

ANTENNA terminals

Two independent cables or antennas can be connected to

these terminals. Use “ANT 1 IN (CABLE)” and “ANT 2 IN (AIR)”

terminals to receive a signal from VHF/UHF antennas or your

cable system. (Refer to pages 16~18)

Ú

POWER IN

Connect the supplied power cord.

BP68-00588G-01Eng(002~015) 5/12/06 5:55 PM Page 12

English - 13

Remote Control

You can use your remote control within a distance of 23 feet and an angle of 30 degrees from the left

and right sides of the TV’s remote control receiver. You can also use your remote control to operate your

VCR, Cable box, DVD player and Set-top box. See pages 34~40 for details.

1. POWER

Turns the TV on and off.

2. Channel Number

Press to directly tune to a particular channel.

3.

-

Press to select additional channels (digital

and analog) being broadcast by the same

station. For example, to select channel

“54-3”, press “54”, then press “

-

” and “3”.

4. ANTENNA

Press to select “AIR” or “CABLE”.

5. CH MGR

Used to displays Channel Lists on the screen.

6. VCR/DVD Controls

Controls VCR or DVD functions: Rewind, Stop,

Play/Pause, Fast Forward.

7. VOL

+

, VOL

-

Press to increase or decrease the volume.

8. MUTE

Press to mute the TV sound.

9. MENU

Displays the main on-screen menu.

10. ▲, ▼, œ, √, ENTER

Press to select highlight up, down, left, or

right. While using the on-screen menus,

press ENTER to activate (or change) a

particular item.

11. INFO

Press to display information on the TV

screen.

12. CAPTION

Controls the caption decoder.

13. P.MODE

Adjust the TV picture by selecting one of

the preset factory settings (or select your

personal, customized picture settings.)

(Refer to page 56)

14. S.MODE

Select Sound effect. (Refer to page 71)

15. MTS (Multichannel Television

Stereo)

Press to choose Stereo, Mono or SAP

(Secondary Audio Program).

16. Mode

(TV/DVD/STB/CABLE/VCR)

Selects a target device to be controlled by

the Samsung remote control (i.e., TV, DVD,

STB, CABLE, or VCR).

17. SOURCE

Press to display all of the available video

sources (TV, AV1, AV2, AV3, S-Video1,

S-Video2, S-Video3, Component1,

Component2, PC, HDMI1, and HDMI2).

18. PRE-CH

Tunes to the previous channel.

19. DNSe

DNSe enhances the sound quality,

automatically controls output,

and prevents sound distortion.

Press this button to set it On or Off.

(Refer to page 72)

20. FAV.CH (Favorite Channel)

Press to switch between your favorite

channels.

21. CH /

Press to change channels.

22. EXIT

Press to exit the menu.

23. SLEEP

Press to select a preset time interval for

automatic shut off.

(Refer to page 44)

24. P.SIZE

Press to change the screen size.

(Refer to page 59)

25. STILL

Press to pause the current screen.

(Refer to page 66)

26. RESET

If your remote control is not functioning

properly, take out the batteries and press

the reset button for about 2~3 seconds.

Re-insert the batteries and try using the

remote control again.

27. SET

Used during set up of this remote control,

so that it will work compatibly with other

devices (Set-top box, VCR, Cable box,

DVD, etc.)

NOTES

• The Color buttons are used

during the channel list

function. (Refer to pages

48~51)

• This is a special remote

control for the visually

impaired, and has Braille

points on the POWER, VOL

+, VOL

-

, CH / , STOP,

and PLAY/PAUSE buttons.

BP68-00588G-01Eng(002~015) 5/12/06 5:55 PM Page 13

Your New Wide TV

English - 14

Installing Batteries in the Remote Control

With normal use, the batteries in the remote control should last about a year. If you notice a performance

degradation while using the remote, the batteries may need to be replaced. Make sure you replace both

batteries and do not mix old and new batteries in the remote control. If you won’t be using the remote

control for a long time, remove the batteries and store them in a cool, dry place.

1

Lift the cover at the back of the remote control

upward as shown in the figure.

2

Install two AAA size batteries. Make sure to

match the “+” and “–” ends of the batteries

with the diagram inside the compartment.

3

Close the cover as shown in the figure.

NOTE

• Do not mix battery types, i.e, alkaline and manganese.

BP68-00588G-00Eng(002~015) 4/22/06 2:01 PM Page 14

Connections

BP68-00588G-00Eng(002~015) 4/22/06 2:01 PM Page 15

Connections

English - 16

Connecting VHF and UHF Antennas

If you do not have a cable system, you will need to connect an antenna to your TV.

Antennas with 75-ohm Round Leads

If your antenna looks like this: it has 75-ohm round leads.

1

Plug the antenna lead into

the ANT 2 IN (AIR) on the

rear panel of your TV.

BP68-00588G-00Eng(016~027) 4/22/06 4:02 PM Page 16

English - 17

Connecting Cable TV

You can connect different cable systems to your TV, including cable without a Cable box,

and cable with a Cable box that descrambles some or all channels.

Cable without a Cable Box

1

Plug the incoming cable into

the ANT 1 IN (CABLE) on the

rear panel of your TV.

Cable with a Cable Box that Descrambles All Channels

1

Find the cable connected to

the ANTENNA OUT

terminal on your Cable box.

This terminal might be

labeled “ANT OUT”, “VHF

OUT” or simply “OUT”.

2

Connect the other end of the

cable to the “ANT 1 IN

(CABLE)” terminal on the rear

panel of your TV.

BP68-00588G-00Eng(016~027) 4/22/06 4:02 PM Page 17

Connections

English - 18

Cable with a Cable Box that Descrambles Some (But Not All) Channels

To complete this connection you will need a two-way splitter, an RF (A/B) switch, and four coaxial

cables (which you can buy from your Samsung dealer or any electronics store).

1

Find and disconnect the

cable that is connected to

the ANTENNA IN terminal

of your Splitter.

This terminal might be

labeled “ANT IN”, “VHF IN”

or simply, “IN”. Connect this

cable to a two-way splitter.

2

Connect a coaxial cable

between an OUT terminal

of the splitter and the IN

terminal of the Cable box.

3

Connect a coaxial cable

between the ANTENNA OUT

terminal of the Cable box

and the B-IN terminal of the

RF (A/B) switch.

4

Connect another cable

between the other OUT

terminal on the splitter and

the A–IN terminal on the

RF (A/B) switch.

5

Connect the last coaxial

cable between the OUT

terminal of the RF (A/B)

switch and the ANT 1 IN

(CABLE) on the TV.

After you’ve made this connection, set the A/B switch to the “A” position for normal viewing.

Set the A/B switch to the “B” position to view scrambled channels. (When you set the A/B switch

to “B”, you will need to tune your Set-Top Box to the Cable box's output channel, which is usually

channel 3 or 4.)

BP68-00588G-01Eng(016~027) 5/12/06 5:55 PM Page 18

English - 19

Connecting a VCR

Connecting a VCR to the Video or S-Video/Audio jack

1

Connect a video cable

between the VIDEO IN (1

or 2) (or S-VIDEO IN 1 or 2)

jack on the TV and the

VIDEO (or S-VIDEO) output

jack on the VCR.

2

Connect a set of audio

cables between the AUDIO

IN (1 or 2) jacks on the TV

and the AUDIO output jacks

on the VCR.

3

Connect a video cable

between the VIDEO OUT

jack on the TV and the

VIDEO input jack on the

VCR.

4

Connect a set of audio

cables between the AUDIO

OUT jacks on the TV and

the AUDIO input jacks on

the VCR.

NOTES

• For better video, use an

S-Video cable.

• Please be sure to match the

color coded input terminals

and cable jacks.

• Connecting Video/Audio

cables from the Video and

Audio Out jacks on the TV to

the A/V In jacks on your VCR

enables you to record from

the TV onto the VCR.

TV Rear Panel

Incoming

Cable or

Antenna

Stereo VCR

3

4

2

1

or

BP68-00588G-01Eng(016~027) 5/8/06 5:52 PM Page 19

Connections

English - 20

Connecting a Camcorder

The side panel jacks on your TV make it easy to connect a Camcorder to your TV.

You can use your camcorder to view tapes without using a VCR.

1

Locate the A/V output jacks

on the camcorder. They are

usually found on the side or

back of the camcorder.

2

Connect a set of audio

cables between the AUDIO

IN jacks on the TV and the

AUDIO output jacks on the

camcorder. If you have a

mono Camcorder, connect

L(mono) to the Camcorder

audio out using only one

audio cable.

3

Connect a video or S-Video

cable between the VIDEO IN

(or S-VIDEO IN) jack on

the TV and the VIDEO (or

S-VIDEO) output jack on the

Camcorder.

The audio-video cables shown

here are usually included with

a Camcorder. (If not, check

your local electronics store.)

If your Camcorder is stereo,

you need to connect a set of

two cables.

NOTE

• Please be sure to match the

color coded input terminals

and cable jacks.

Camcorder

Output Jacks

1

TV Rear and right side

Camcorder

or

2

3

BP68-00588G-01Eng(016~027) 5/12/06 5:56 PM Page 20

Page is loading ...

Samsung HL-S6767W User manual

Samsung HL-S6767W User manual

Related papers

Other documents