Whirlpool AKM 300/IX/01 User guide

Type
User guide
8
INSTRUCTION FOR USE
BEFORE USING THE COOKING HOB
SUGGESTIONS FOR ENVIRONMENT PROTECTION
PRECAUTIONS AND GENERAL ADVICE
ENERGY SAVING TIPS
CARE AND MAINTENANCE
AFTER-SALES SERVICE
INSTALLATION
ELECTRICAL CONNECTION
9
Keep the packaging material (plastic bags, polystyrene parts, etc.) out
of the reach of children, as they are potentially dangerous.
Check whether the cooking hob has been damaged during transport..
Ensure that the installation and electrical connections are
performed by a qualied technician, following the manufacturer’s
instructions and in compliance with current local safety
regulations..
BEFORE USING THE COOKING HOB
SUGGESTIONS FOR ENVIRONMENT PROTECTION
Packing
The packaging material is entirely recyclable, and is marked with therecycling
symbol , which identies it as a type of material that must be sent to local
waste-disposal centres.
Domestic appliances
This appliance is marked according to the European Directive 2012/19/EC,
Waste Electrical and Electronic Equipment (WEEE). By ensuring that this
appliance is scrapped suitably, you can help prevent potentially damaging
consequences for the environment and health.
The symbol on the appliance, or on the accompanying documentation,
indicates that this product must not be treated as household waste, but must
be delivered to the nearest collection centre for the recycling of electrical and
electronic appliances. Disposal must be carried out in accordance with local
environmental regulations for waste disposal.For further information on the
treatment, recovery and recycling of this appliance, contact your competent
local authority, the collection service for household waste or the shop where
you purchased the appliance.
PRECAUTIONS AND GENERAL ADVICE
To get full satisfaction of your cooking hob,
please read these instructions carefully and
keep them for future consultation.
Before any cleaning or maintenance operation,disconnect the
cooking hob from mains power supply.
In case of prolonged use, additional ventilation may be needed
(opening a window or increasing the extraction force of the hood).
Keep children away from the cooking hob when it is in use.
The appliance must not be used be people (including children) with
limited physical,sensory or mental abilities, or without experience
or expertise, unless they have received instructions for using it from
those responsible for their safety.
After use, ensure that the knobs are in position zero.
Declaration of conformity
This oven is designed to come into contact with food and complies with
regulation (EC) no.1935/2004.
This cooking hob (Class Y) has been designed to be used only for cooking.
Any other use (such as heating a room) is improper and dangerous.
This cooking hob has been designed, constructed and marketed in
compliance with:
- the safety requirements of “Low Voltage” Directive 2006/95/EC (replacing
73/23 EEC as amended);
- protection requirements of EEC Directive “EMC” 89/336;
- requirements of EEC Directive 93/68.
ENERGY SAVING TIPS
The cooking hob is equipped with hotplates having different diameters. Use
pots and pans whose bottom diameter is equal to that of the hotplates, or
slightly larger.
Only use at-bottomed pots and pans.
Do not operate a hotplate without placing a container on it.
If possible, keep the container covered when cooking.
Cook vegetables, potatoes, etc. with a small amount of water in order to
cut down cooking time.
A pressure cooker allows you to save even more energy and time.
10
CARE AND MAINTENANCE
Cleaning the hob
Before cleaning the cooking hob, disconnect it from mains power
supply and wait until it has cooled down.
Important: never clean the appliance with steam cleaning equipment.
Wipe it with a cloth moistened with hot water and soap or diluted liquid
detergent.
Do not use abrasive or corrosive products, chlorine products or steel wool.
Do not leave acid or alkaline substances, such as vinegar, salt or lemon
juice, etc., on the cooking hob.
Stainless steel surface
Clean it with a specic commercial product.
Note: if the cooking hob is used continuously,the high temperatures
may alter the colour of the hotplates.
Cleaning the electric hotplates
The electric hotplates must be cleaned when they are lukewarm. Wipe
them with a cloth moistened with water and salt, and polish with a cloth
moistened with oil.
AFTER-SALES SERVICE
Before contacting After-sales Service:
1. Re-start the cooking hob, to check whether correct operation has been
restored.
2. If the malfunction persists, call the After-sales Service.
Give the following information:
type of malfunction;
model of cooking hob;
service number (i.e., the number that follows the word SERVICE on the
rating plate under the cooking hob and on the guarantee paper);
your complete address;
your telephone number and area code.
If any repairs are required, please contact an authorised After-sales Service
as indicated in the warranty. In the unlikely event that an operation or repair
is carried out by an unauthorised technician, always request a certication
of the job carried out and insist on the use of original spare parts. Failure
to comply with these instructions may compromise the safety and
quality of the product.
INSTALLATION
Technical information for installer
This cooking hob can be embedded in a worktop 20 to 50 mm thick.
If another appliance is not tted under the cooking hob, insert a separator
panel, at a distance of at least 90 mm from the cooking hob bottom.
If a vertical piece of furniture is installed, there must be a gap of at
least 100 mm between it and the edge of the cooking hob.
Installation of cooking hob
Apply the supplied gasket to the cooking hob (unless it has already
been tted), after having cleaned its surface as shown in the gure.
A - If the worktop is made out of wood, use the springs supplied.
1. Fit the 4 springs A into the relevant seat under the box.
2. Make an opening in the worktop, respecting the dimensions indicated in
the enclosed product description sheet.
3. Install the cooking hob in the worktop.
B- If the worktop is made out of marble or other materials (plastics, ceramics
or stone), the cooking hob must be xed by means of brackets B to be ordered
from the After-sales Service (code 4819 310 18528).
1. Align the brackets with the bores and x them with the screws.
2. Make an opening in the worktop, respecting the dimensions indicated in
the product description sheet.
3. Install the cooking hob in the worktop.
Before installing the cooking hob, remove the plastic lm that protects
it, if present. The outer surfaces of the furniture or appliances adjoining
the cooking hob must be heat resistant (heat protection “Y”, according to
standards EN 60335-2-6).
Installation must comply with current local safety regulations.
11
ELECTRICAL CONNECTION
Elektrischer Anschluss
The electrical connections must comply with local regulations.
The data concerning the voltage and the power consumption is located
on the serial number plate.
Earthing the appliance is a legal requirement.The manufacturer
disclaims any responsibility for possible damage or injury to people,
pets or objects arising from nonobservance of the regulations
specied above.
In the installation a switching facility with a contact opening width
of at least 3 mm which will enable the appliance to be disconnected
from the supply must be provided.
The electrical components must not be accessible after installation.
Connection and Installation
If the cooktop terminals do not correspond to the connection and colour
indications on the cooktop/oven connection plate located at the top of the
oven, request the adaptor kit, code AMC 874, from the After-sales Service.
1. Install the cooktop in its seat.
2. Connect the four terminals A to the oven terminals B situated in the rear
section, paying attention that the correspondance of the coloured plugs
is respected.
3. Fasten the cooktop.
4. Insert the oven into the kitchen unit cavity and fasten with the screws
supplied.
Note:
If connecting to the separate control panel do not connect up to the oven,but
carefully read the instructions supplied with the operator panel.
12
INSTRUCTIONS D’UTILISATION
AVANT D’UTILISER LA TABLE DE CUISSON POUR LA PREMIÈRE
FOIS
CONSEILS POUR LE RESPECT DE L’ENVIRONNEMENT
MESURES DE PRÉCAUTION ET CONSEILS D’ORDRE GÉNÉRAL
CONSEILS POUR ÉCONOMISER L’ÉNERGIE
NETTOYAGE ET ENTRETIEN
SERVICE APRÈS-VENTE
MISE EN PLACE
BRANCHEMENT ÉLECTRIQUE
24
ISTRUZIONI PER L’USO
PRIMA DI USARE IL PIANO COTTURA
SUGGERIMENTI PER LA TUTELA DELL’AMBIENTE
PRECAUZIONI E RACCOMANDAZIONI GENERALI
COME RISPARMIARE ENERGIA
PULIZIA E MANUTENZIONE
SERVIZIO ASSISTENZA TECNICA
INSTALLAZIONE
COLLEGAMENTO ELETTRICO
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52

Whirlpool AKM 300/IX/01 User guide

Type
User guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI