Assa Abloy HES KP20 User manual

Brand: Assa Abloy

Model: HES KP20

Type: User manual

Assa Abloy HES KP20 is a stand-alone cabinet lock that can be used in various settings, including homes, offices, and businesses, to secure cabinets and other storage spaces. It features a keypad for entering passcodes, and it can be programmed with either a private mode (ongoing use) or a public mode (one-time use). The lock also has an emergency power option, which allows it to be unlocked with a standard 5-pin Micro USB cable in case the batteries run out.

Instruction Manual

Public Mode (One -time Use)

Lock the door

Close the cabinet door and enter your passcode

Passcode length

How to configure

4 Digit

5 to 12 Digits

Press any four digits

Press + 5 to 12 Digits +

(ex : 1 2 3 4) (ex : 1 2 3 4) (ex : 1 2 3 4)

문을 열때

Private Mode (On-going Use)

Enter the registered pass code

Rotate the knob to the locked position

and open the door

문을 잠글 때

Close the door and turn the knob

to the locked position

Using the Master Code

Important Note

· Factory Master Code

“ 3 5 2 6 ”

Two code levels

Master

Code

User

Code

An existing user code is deleted

when a valid Master Code is

entered.

The User Code will need to be set

again during programming of

private mode.

Press + “Master Code” +

Beep-Beep-Beep-Beep-Beep-

- Listen for extended beep

- Unlock the lock with short beep 5x followed by 5x

flashing Red LED's

Rotate the knob to the unlocked position and

open the door.

- this is confirmed by three red flashes followed

by a standard beep ( Sol-Do~)

-this is confirmed by three yellow flashes followed

by a long beep (Do-Mi-Sol~)

Enter the passcode you used to lock the door

Rotate the knob to the unlocked position

and open the door

Flashes

3 times

※ Private Mode (On-going Use)

- when the knob is rotated to the locked position

the cabinet lock will lock in 3 seconds.

Rotate the knob to the locked position

(ex : # 3 5 2 6 #)

Emergency Power

Step 1

Step 2

Sol-Do~

Do-Mi-Sol~

Flashes

3 times

Do-Mi-Sol~

Flashes

3 times

Sol-Do~

St ep 1 Step 2

Do-Mi-Sol~

Flashes

5 times

Do-Mi-Sol~

Sol-Do

Connect a standard 5 pin Micro USB cable to

the USB port on the right side of the lock

When power is applied, both LED's flash

5x followed by an extended beep

Enter a valid User Code or Master Code to unlock

the cabinet

-An existing user code is deleted when a valid

Master Code is entered.

-The User Code will need to be set again during

programming of private mode.

Open the door and change the batteries

Package contents

Unlock the door Unlock the door Lock the door

Flashes

3 times

-this is confirmed by three yellow flashes followed

by a long beep (Do-Mi-Sol~)

One (1) HES KP20 cabinet lock

One (1) Rubber washer

One (1) M6 nut

One (1) Flat and one (1) Offset Locking Cam

Two (2) M4 washers

Five (5) Pan Head Phillips Screws

M4 x10mm locking cam screw

M4 x10mm (1-5mm thick door)

M4 x 20 mm (10-15mm thick door)

M4 x 25 mm (15-20mm thick door)

M4 x 30 mm (20-25mm thick door)

※ Public Mode (One-Time use)

- Previously used passcode will be erased

after unlock and stay open for next user.

6-1

6-2

Hardware installation

6-1

6-2

Ø13/64"

(5 mm)

Ø11/16"

(17 mm)

5-5/64" (129 mm)

Flashes

5 times

Installation Template

Caution

-Risk of explosion if battery is replaced

by an incorrect type.

-Please only use new alkaline batteries.

Power

: 4.5V (Alkaline AAA 1.5V x 3)

HES KP20 (12-button keypad) stand-alone cabinet lock

LED Feedback

-Red

-Yellow

-Amber

Audio Feedback

Short Beep - "Beep-"

Std. Beep - "Sol-Do~"

Long Beep - "Do-Mi-Sol~"

-this is confirmed by three red flashes followed

by a standard beep (Sol-Do~)

The cabinet lock will automatically lock in 3 seconds

Press for 4 secs.

ELECTRONIC SECURITRY HARDWARE

HES | Securitron

assaabloyesh.com | 800.626.7590 | 10027 S. 51

Street Phoenix, AZ 85044 USA

Change a User Code with a registered Master Code (Private Mode)

Press button for 4 secs

Enter registered Master Code

How to switch between Public & Private Mode

Beep~

- Flashing Yello w LED's f or 8

seconds followed by a short beep

Enter

Master Code

Ra-Si~

- Flashing Yello w LED's f or 8

seconds followed by a long beep

Enter new

User Code

Do-Re-Mi~

- 5x flashing Red LED's followed

by an extended beep

-New User Code successfully

registered

Change a User Code with a registered User Code

# (for 4 seconds)

3 5 2 6 #

3 3 3 3 #

· Master code : 3 5 2 6

· New User code : 3 3 3 3

문을 열때

문을 잠글 때

Turn on the sound

Change the User Code

(for 4 sec s)

Step 1

(1 time)

* *

(1 time)

Beep~

(1 time)

※ Private Mode (On-going Use)

- when the knob is rotated to the locked position

the cabinet lock will lock in 3 seconds.

How to set other functions of HES KP20

Example)

예시 )

Example)

Enter registered Master Code; an existing user code is deleted when a valid Master Code is entered

Step 2 Step 3 Step 4 Step 5

Flashing

for 8 secs

Flashing

for 8 secs

Press button

Enter new User Code

Flashing

for 8 secs

Press button

Step 1 Step 2 Step 3 Step 4 Step 5

(for 4 sec s)

Beep~

Flashing

for 8 secs

- Flashing Yello w LED's f or 8

seconds followed by a short beep

Enter

User Code

Enter registered User Code

Ra-Si~

Flashing

for 8 secs

Press button

- Flashing Yello w LED's f or 8

seconds followed by a long beep

Enter new User Code

Enter

User Code

Do-Re-Mi~

Flashes

5 times

- 5x flashing Red LED's followed by

an ex tended beep

-New User Code successfully registered

· Current User code : 3 3 3 3

· New User code : 4 4 4 4

* (for 4 seconds)

3 3 3 3 *

4 4 4 4 *

Example)

How to turn Melody Sound On / Off

Step 1 Step 2

Step 3

Step 4 Step 5 Step 6 Step 7

Press button for 4 secs

- Flashing Yello w LED's f or 8

seconds followed by a short beep

Enter registered “Master Code”

Enter

“Master Code”

Flashing

for 8 secs

Ra-Si~

Press button

Enter new

“Master Code”

Enter new

“Master Code”

again

- Flashing Yello w LED's f or 8

seconds followed by a short beep

Enter new “Master Code”

Press button

- Flashing Yello w LED's f or 8

seconds followed by a short beep

Enter New “Master Code”

one more time

Press button

-5x flashing Red LED's followed by

an ex tended beep

-New Master Code successfully registered

· Current Master code : 3 5 2 6

· New Master code : 5 5 5 5

# (for 4 seconds) 3 5 2 6 * 5 5 5 5 # 5 5 5 5 #

Change the Master Code

Flashing

for 8 secs

(for 4 secs)

Ra- i~

Do-Re-Mi~

Flashing

for 8 secs

Flashes

5 times

Sol-Do~

Flashes

3 times

- 2x flashing Red LED's followed by a

long beep

- 3x flashing Yellow LED's followed by a

long beep

Flashes

3 times

Sol-Do~

(for 4 secs)

- 3x flashing Yellow LED's followed by a

long beep

Turn off the sound

Press , and buttons

simultaneously for 4 seconds

-2x flashing Red LED's followed by a

long beep

Ra-Si~

(for 4 secs)

Press , and buttons

simultaneously for 4 seconds

(for 4 secs)

Press , and buttons

simultaneously for 4 seconds

문을 열때

문을 잠글 때

Private Mode Public Mode

Sol-Do~

(for 4 secs)

Press , and buttons

simultaneously for 4 seconds

Flashes

2 times

Flashes

2 times

※ FCC statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This appliance and its antenna must not be co-located or operation in conjunction with any other antenna or transmitter.

This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.

(1 tim e)

Document #3080006.013 Rev. 1

Assa Abloy HES KP20 User manual

Assa Abloy HES KP20 User manual

Assa Abloy HES KP20 User manual

Related papers

Other documents