2. Edsal
  3. XCP100

Edsal XCP100 Assembly Manual

  • Hello! I am an AI chatbot trained to assist you with the Edsal XCP100 Assembly Manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Installation Instructions For Connector Pin
Installation Instructions For Connector Pin
Installation Instructions For Connector Pin
Step
1
Figure A
Figure B
Installation Instructions For Connector Pin
Installation Instructions For Connector Pin
Installation Instructions For Connector Pin
Step
1
Figure A
Figure B
Installation Instructions For Connector Pin
Installation Instructions For Connector Pin
Installation Instructions For Connector Pin
Step
1
Figure A
Figure B
Installation Instructions For Connector Pin
Installation Instructions For Connector Pin
Installation Instructions For Connector Pin
Step
1
Figure A
Figure B
Installation Instructions For Connector Pin
(Part Number XCP100 - Qty. supplied 60)
Install four (4) connector pins to the holes of the plastic shelving
after assembly of the unit has been completed (see figure A). Install
the connector pins by pushing through the holes provided on the
plastic shelving (see figure B).
Note:
The outside ends on each level of plastic shelving, DO NOT
require the connector pins.
Installation Instructions For Connector Pin
(Part Number XCP100 - Qty. supplied 60)
Install four (4) connector pins to the holes of the plastic shelving
after assembly of the unit has been completed (see figure A). Install
the connector pins by pushing through the holes provided on the
plastic shelving (see figure B).
Note:
The outside ends on each level of plastic shelving, DO NOT
require the connector pins.
Installation Instructions For Connector Pin
(Part Number XCP100 - Qty. supplied 60)
Install four (4) connector pins to the holes of the plastic shelving
after assembly of the unit has been completed (see figure A). Install
the connector pins by pushing through the holes provided on the
plastic shelving (see figure B).
Note:
The outside ends on each level of plastic shelving, DO NOT
require the connector pins.
Installation Instructions For Connector Pin
(Part Number XCP100 - Qty. supplied 60)
Install four (4) connector pins to the holes of the plastic shelving
after assembly of the unit has been completed (see figure A). Install
the connector pins by pushing through the holes provided on the
plastic shelving (see figure B).
Note:
The outside ends on each level of plastic shelving, DO NOT
require the connector pins.
/